Experimental Study on Front Spreading of Lock-Exchange Gravity Current with Long Lock Length
Publication: Journal of Engineering Mechanics
Volume 146, Issue 1
Abstract
Full-depth lock-exchange experiments of saltwater with a lock length of 40 m were conducted in a horizontal open channel in order to gain insight into the gravity currents of long lock releases. Without the effects of backreflected waves and initial volume on their development, the experiments showed that the front spreading distances and front velocities developed very smoothly without any transitions. But they were significantly affected by drag and friction. Their variations with time in later periods were different from the previously published results for gravity flows of small-volume release. The current was analyzed using one-layer open-channel hydraulics. The theoretical results show that the front traveling length over time is a quadratic function and the front velocity decreases linearly based on the initial speed, which is related to the drag coefficient. Similarly, the front height also decreases linearly from half of the total water depth. The rate of the decrease depends on drag and friction, which can be represented by the velocity coefficient at a gate section and the dimensionless Chezy’s coefficient . The resulting expressions reveal the effects of drag and friction on all the current processes in the slumping phase. The theoretical and experimental results are in satisfactory agreement. Comparison of previous and present results indicates that a power law does not fit well all the flow processes of the experiments. It is found that the experiments in a later period are close to the gravity current of constant discharge in the buoyancy-viscous phase.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code generated or used during the study are available from the corresponding author by request.
Acknowledgments
This research was sponsored by the National Key Research and Development Program of China (2016YFC0402600), the National Natural Science Foundation of China (11572130, 11872117, and 11432015) and the Open Research Foundation of the Key Laboratory of the Pearl River Estuarine Dynamics and Associated Process Regulation, Ministry of Water Resources (2017KJ02). The authors are grateful to the Center for Coastal Ocean Science and Technology, Marine School of Sun Yat-sen University, for helpful discussions.
References
Adduce, C., G. Sciortino, and S. Proietti. 2012. “Gravity currents produced by lock exchange: Experiments and simulations with a two-layer shallow-water model with entrainment.” J. Hydraul. Eng. 138 (2): 111–121. https://doi.org/10.1061/(ASCE)HY.1943-7900.0000484.
Amy, L. A., A. J. Hogg, J. Peakall, and P. J. Talling. 2005. “Abrupt transitions in gravity currents.” J. Geophys. Res. 110 (3): 1–19. https://doi.org/10.1029/2004JF000197.
Benjamin, T. B. 1968. “Gravity currents and related phenomena.” J. Fluid Mech. 31 (2): 209–248. https://doi.org/10.1017/S0022112068000133.
Bhaganagar, K., and N. Pillalamarri. 2017. “Lock-exchange release density currents over three-dimensional regular roughness elements.” J. Fluid Mech. 832 (Dec): 793–824. https://doi.org/10.1017/jfm.2017.678.
Bonometti, T., and S. Balachandar. 2008. “Effect of Schmidt number on the structure and propagation of density currents.” Theor. Comp. Fluid Dyn. 22 (5): 341–361. https://doi.org/10.1007/s00162-008-0085-2.
Cantero, M. I., J. R. Lee, S. Balachandar, and M. H. Garcia. 2007. “On the front velocity of gravity currents.” J. Fluid Mech. 586 (Sep): 1–39. https://doi.org/10.1017/S0022112007005769.
Cantero, M. I., J. R. Lee, S. Balachandar, M. H. Garcia, and D. Bock. 2008. “Turbulent structures in planar gravity and their influence on the flow dynamics.” J. Geophys. Res. 113 (8): C08018. https://doi.org/10.1029/2007JC004645.
Constantinescu, G. 2014. “Les of lock-exchange compositional gravity currents: A brief review of some recent results.” Environ. Fluid Mech. 14 (2): 295–317. https://doi.org/10.1007/s10652-013-9289-0.
Dai, A. 2017. “Experiments on two-layer density-stratified inertial gravity currents.” Phys. Rev. Fluids 2 (7): 073802. https://doi.org/10.1103/PhysRevFluids.2.073802.
Didden, N., and T. Maxworthy. 1982. “The spreading of plane and axisymmetric gravity currents.” J. Fluid Mech. 121 (1): 27–42. https://doi.org/10.1017/S0022112082001785.
Gratton, J., and F. Minotti. 1990. “Self-similar viscous gravity currents: Phase-plane formalism.” J. Fluid Mech. 210 (Jan): 155–182. https://doi.org/10.1017/S0022112090001240.
Gratton, J., and C. Vigo. 1994. “Self-similar gravity currents with variable inflow revisited: Plane currents.” J. Fluid Mech. 258 (Jan): 77–104. https://doi.org/10.1017/S0022112094003241.
Hallez, Y., and J. Magnaudel. 2009. “A numerical investigation of horizontal viscous gravity currents.” J. Fluid Mech. 630 (Jul): 71–91. https://doi.org/10.1017/S0022112009006454.
Härtel, C., E. Meiburg, and F. Necker. 2000. “Analysis and direct numerical simulation of the flow at a gravity-current head. Part 1. Flow topology and front speed for slip and no-slip boundaries.” J. Fluid Mech. 418 (Sep): 189–212. https://doi.org/10.1017/S0022112000001221.
Hatcher, L., A. J. Hogg, and A. W. Woods. 2000. “The effects of drag on turbulent gravity currents.” J. Fluid Mech. 416 (Aug): 297–314. https://doi.org/10.1017/S002211200000896X.
Hogg, A. M., G. N. Ivey, and K. B. Winters. 2001. “Hydraulics and mixing in controlled exchange flows.” J. Geophys. Res. 106 (1): 959–972. https://doi.org/10.1029/2000JC000266.
Hoult, D. P. 1972. “Oil spreading on the sea.” Ann. Rev. Fluid Mech. 4 (1): 341–368. https://doi.org/10.1146/annurev.fl.04.010172.002013.
Huppert, H. E. 1982. “The propagation of two-dimensional and axisymmetric viscous gravity currents over a rigid horizontal surface.” J. Fluid Mech. 121 (1): 43–58. https://doi.org/10.1017/S0022112082001797.
Huppert, H. E., and J. E. Simpson. 1980. “The slumping of gravity currents.” J. Fluid Mech. 99 (4): 785–799. https://doi.org/10.1017/S0022112080000894.
Ilicak, M. 2014. “Energetics and mixing efficiency of lock-exchange flow.” Ocean Modell. 83 (Nov): 1–10. https://doi.org/10.1016/j.ocemod.2014.08.003.
Inghilesi, R., C. Adduce, V. Lombardi, F. Roman, and V. Armenio. 2018. “Axisymmetric three-dimensional gravity currents generated by lock exchange.” J. Fluid Mech. 851 (Sep): 507–544. https://doi.org/10.1017/jfm.2018.500.
Jiang, Y., and X. Liu. 2018. “Experimental and numerical investigation of density current over macro-roughness.” Environ. Fluid Mech. 18 (1): 97–116. https://doi.org/10.1007/s10652-016-9500-1.
Kneller, B. C., S. J. Bennett, and W. D. Mckaffrey. 1999. “Velocity structure, turbulence and fluid stresses in experimental gravity currents.” J. Geophys. Res. 104 (3): 5381–5391. https://doi.org/10.1029/1998JC900077.
Kyrousi, F., A. Leonardi, F. Roman, V. Armenio, F. Zanello, J. Zordan, C. Juez, and L Falcomer. 2018. “Large Eddy simulations of sediment entrainment induced by a lock-exchange gravity current.” Adv. Water Resour. 114 (Apr): 102–118. https://doi.org/10.1016/j.advwatres.2018.02.002.
Liu, X., and Y. Jiang. 2014. “Direct numerical simulation of boundary condition effect on the propagation of density current in wall-bounded and open channel.” Environ. Fluid Mech. 14 (2): 387–407. https://doi.org/10.1007/s10652-013-9283-6.
Lombardi, V., C. Adduce, and M. La Rocca. 2018. “Unconfined lock-exchange gravity currents with variable lock width: Laboratory experiments and shallow-water simulations.” J. Hydraul. Res. 56 (3): 399–411. https://doi.org/10.1080/00221686.2017.1372817.
Marino, B. M., L. P. Thomas, and P. F. Linden. 2005. “The front condition for gravity currents.” J. Fluid Mech. 536 (Aug): 49–78. https://doi.org/10.1017/S0022112005004933.
Martin, J., N. Rakotomalala, L. Talon, and D. Salin. 2011. “Viscous lock-exchange in rectangular channels.” J. Fluid Mech. 673 (Apr): 132–146. https://doi.org/10.1017/S0022112010006208.
Nogueira, H., C. Adduce, E. Alves, and M. Franca. 2013. “Analysis of lock-exchange gravity currents over smooth and rough bed.” J. Hydraul. Res. 51 (4): 417–431. https://doi.org/10.1080/00221686.2013.798363.
Ottolenghi, L., C. Adduce, F. Roman, and V. Armenio. 2017. “Analysis of the flow in gravity currents propagating up a slope.” Ocean Modell. 115 (Jul): 1–13. https://doi.org/10.1016/j.ocemod.2017.05.001.
Ottolenghi, L., P. Prestininzi, A. Montessori, C. Adduce, and M. La Rocca. 2018. “Lattice Boltzmann simulations of gravity currents.” Euro J. Mech.-B/Fluids 67 (Jan): 125–136. https://doi.org/10.1016/j.euromechflu.2017.09.003.
Rottman, J. W., and J. E. Simpson. 1983. “Gravity currents produced by instantaneous releases of a heavy fluid in a rectangular channel.” J. Fluid Mech. 135 (1): 95–110. https://doi.org/10.1017/S0022112083002979.
Shin, J. O., S. B. Dalziel, and P. F. Linden. 2004. “Gravity currents produced by lock exchange.” J. Fluid Mech. 521 (Dec): 1–34. https://doi.org/10.1017/S002211200400165X.
Simpson, J. E. 1997. Gravity currents in the environment and the laboratory. Cambridge, UK: Cambridge University Press.
Theiler, Q., and M. Franca. 2016. “Contained density currents with high volume of release.” Sedimentology 63 (6): 1820–1842. https://doi.org/10.1111/sed.12295.
Ungarish, M., C. A. Mériaux, and C. B. Kurz-Besson. 2014. “The propagation of gravity currents in a V-shaped triangular cross-section channel: Experiment and theory.” J. Fluid Mech. 754 (Sep): 232–249. https://doi.org/10.1017/jfm.2014.396.
Zemach, T. 2015. “Gravity currents in non-rectangular cross-section channels: Extensions to non-Boussinesq systems.” Environ. Fluid Mech. 15 (5): 975–998. https://doi.org/10.1007/s10652-014-9391-y.
Zhou, J., C. Cenedese, and T. Williams. 2017. “On the propagation of gravity currents over and through a submerged array of circular cylinders.” J. Fluid Mech. 831 (Nov): 394–417. https://doi.org/10.1017/jfm.2017.604.
Zordan, J., C. Juez, A. J. Schleiss, and M. J. Franca. 2018a. “Entrainment, transport and deposition of sediment by saline gravity currents.” Adv. Water Resour. 115 (May): 17–32. https://doi.org/10.1016/j.advwatres.2018.02.017.
Zordan, J., A. J. Schleiss, and M. J. Franca. 2018b. “Structure of a dense release produced by varying initial conditions.” Enviro. Fluid Mech. 18 (5): 1101–1119. https://doi.org/10.1007/s10652-018-9586-8.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Oct 11, 2018
Accepted: May 28, 2019
Published online: Oct 31, 2019
Published in print: Jan 1, 2020
Discussion open until: Mar 31, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.