Numerical and Experimental Study of Internal Curing Effects on Permeability of Mortar Samples
Publication: Journal of Engineering Mechanics
Volume 145, Issue 2
Abstract
This study investigated the transport properties of cement mortar using microscale X-ray computed tomography (μCT) characterization techniques, the Permeability Solver computational program, and laboratory experiments. Lightweight aggregates (LWAs) were used as the internal curing agent in this study. Mortar samples with and without internal curing were prepared with a water-cement ratio of 0.45. The μCT techniques were applied to obtain digital data of the microstructure of the mortar samples at the resolution of 1 μm. The acquired images were processed to identify the pore structure. Three-dimensional (3D) digital pore structure samples were reconstructed, and the data were read by the Permeability Solver to analyze the porosity, pore conductivity, and permeability of the mortar mixtures. Pore connectivity was evaluated by the burning algorithm. Water transport was simulated by the finite-difference method combined with the compressibility relaxation algorithm. Darcy’s Law was then applied to calculate the permeability of the mixture. The transport properties of mortar with and without internal curing were simulated at 60 and 84 h. The results showed that the internally cured samples had lower permeability than the samples without internal curing. The permeability of the samples with internal curing decreased from 60 to 84 h. The results indicated that autogenous shrinkage cracks could be mitigated using internal curing.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors acknowledge the technical support from NIST researcher Dale Bentz on the Permeability Solver. This research used resources from the Advanced Photon Source, a US Department of Energy (DOE) Office of Science User Facility operated for the DOE Office of Science by Argonne National Laboratory under Contract No. DE-AC02-06CH11357.
References
ASTM. 2007. Standard specification for portland cement. ASTM-C150. West Conshohocken, PA: ASTM.
ASTM. 2013. Standard specification for lightweight aggregate for internal curing of concrete. ASTM C1761. West Conshohocken, PA: ASTM.
ASTM. 2014. Standard practice for mechanical mixing of hydraulic cement pastes and mortars of plastic consistency. ASTM C305. West Conshohocken, PA: ASTM.
Bentur, A., S. Igarashi, and K. Kovler. 1999. “Control of autogenous shrinkage stresses and cracking in high strength concretes.” In Proc., 5th Int. Symp. on High Strength/High Performance Concrete, 1017–1026. Oslo, Norway: Norwegian Concrete Association.
Bentz, D. P. 1999. “Self-desiccation and its importance in concrete technology.” In Proc., 2nd Int. Research Seminar, edited by B. Persson and G. Fagerlund, 127–135. Lund, Sweden.
Bentz, D. P. 2007. “Internal curing of high-performance blended cement mortars.” ACI Mater. J. 104 (4): 408.
Bentz, D. P. 2009. “Influence of internal curing using lightweight aggregates on interfacial transition zone percolation and chloride ingress in mortars.” Cem. Concr. Compos. 31 (5): 285–289. https://doi.org/10.1016/j.cemconcomp.2009.03.001.
Bentz, D. P., and E. J. Garboczi. 1991. “Simulation studies of the effects of mineral admixtures on the cement paste-aggregate interfacial zone.” ACI Mater. J. 88 (5): 518–529.
Bentz, D. P., P. Lura, and J. W. Roberts. 2005. “Mixture proportioning for internal curing.” Concr. Int. 27 (2): 35–40.
Bentz, D. P., and N. S. Martys. 2007. A Stokes Permeability Solver for three-dimensional porous media. Gaithersburg, MD: NIST.
Bentz, D. P., and K. A. Snyder. 1999. “Protected paste volume in concrete: Extension to internal curing using saturated lightweight fine aggregate.” Cem. Concr. Res. 29 (11): 1863–1867. https://doi.org/10.1016/S0008-8846(99)00178-7.
Bentz, D. P., and P. E. Stutzman. 2008. “Internal curing and microstructure of high-performance mortars.” In Internal curing of high performance concretes: Laboratory and field experiences: ACI SP-256, 81–90. Farmington Hills, MI: ACI.
Byard, B. E., and A. K. Schindler. 2010. Cracking tendency of lightweight concrete. Auburn, AL: Highway Research Center.
Byard, B. E., A. K. Schindler, and R. W. Barnes. 2011. “Early-age cracking tendency and ultimate degree of hydration of internally cured concrete.” J. Mater. Civ. Eng. 24 (8): 1025–1033. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000469.
Castro, J., R. Spragg, and J. Weiss. 2011. “Water absorption and electrical conductivity for internally cured mortars with a W/C between 0.30 and 0.45.” J. Mater. Civ. Eng. 24 (2): 223–231. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000377.
Chindaprasirt, P., S. Homwuttiwong, and C. Jaturapitakkul. 2007. “Strength and water permeability of concrete containing palm oil fuel ash and rice husk–bark ash.” Constr. Build. Mater. 21 (7): 1492–1499. https://doi.org/10.1016/j.conbuildmat.2006.06.015.
Chorin, A. J. 1997. “A numerical method for solving incompressible viscous flow problems.” J. Comput. Phys. 135 (2): 118–125. https://doi.org/10.1006/jcph.1997.5716.
Craeye, B., M. Geirnaert, and G. De Schutter. 2011. “Super absorbing polymers as an internal curing agent for mitigation of early-age cracking of high-performance concrete bridge decks.” Constr. Build. Mater. 25 (1): 1–13. https://doi.org/10.1016/j.conbuildmat.2010.06.063.
Cusson, D., and T. Hoogeveen. 2008. “Internal curing of high-performance concrete with pre-soaked fine lightweight aggregate for prevention of autogenous shrinkage cracking.” Cem. Concr. Res. 38 (6): 757–765. https://doi.org/10.1016/j.cemconres.2008.02.001.
De la Varga, I., J. Castro, D. Bentz, and J. Weiss. 2012. “Application of internal curing for mixtures containing high volumes of fly ash.” Cem. Concr. Compos. 34 (9): 1001–1008. https://doi.org/10.1016/j.cemconcomp.2012.06.008.
Diamond, S. 2003. “Percolation due to overlapping ITZs in laboratory mortars? A microstructural evaluation.” Cem. Concr. Res. 33 (7): 949–955. https://doi.org/10.1016/S0008-8846(02)00996-1.
Garboczi, E. J. 1998. Finite element and finite difference programs for computing the linear electric and elastic properties of digital images of random materials. Gaithersburg, MD: NIST.
Henkensiefken, R., D. Bentz, T. Nantung, and J. Weiss. 2009. “Volume change and cracking in internally cured mixtures made with saturated lightweight aggregate under sealed and unsealed conditions.” Cem. Concr. Compos. 31 (7): 427–437. https://doi.org/10.1016/j.cemconcomp.2009.04.003.
Jensen, M., and P. F. Hansen. 1996. “Autogenous deformation and change of the relative humidity in silica fume-modified cement paste.” Mater. J. 93 (6): 539–543.
Jensen, O. M., and P. F. Hansen. 2001. “Water-entrained cement-based materials. I: Principles and theoretical background.” Cem. Concr. Res. 31 (4): 647–654. https://doi.org/10.1016/S0008-8846(01)00463-X.
Khokhrin, N. K. 1973. The durability of lightweight concrete structural members. Kuibyshev: USSR.
Li, K., P. Stroeven, M. Stroeven, and L. J. Sluys. 2017. “A numerical investigation into the influence of the interfacial transition zone on the permeability of partially saturated cement paste between aggregate surfaces.” Cem. Concr. Res. 102 (1): 99–108. https://doi.org/10.1016/j.cemconres.2017.09.005.
Lindquist, W. B., S. M. Lee, D. A. Coker, K. W. Jones, and P. Spanne. 1996. “Medial axis analysis of void structure in three-dimensional tomographic images of porous media.” J. Geophys. Res.: Solid Earth 101 (B4): 8297–8310. https://doi.org/10.1029/95JB03039.
Liu, J., C. Shi, X. Ma, K. H. Khayat, J. Zhang, and D. Wang. 2017. “An overview on the effect of internal curing on shrinkage of high performance cement-based materials.” Constr. Build. Mater. 146 (1): 702–712. https://doi.org/10.1016/j.conbuildmat.2017.04.154.
Lo, T. Y., and H. Z. Cui. 2004. “Effect of porous lightweight aggregate on strength of concrete.” Mater. Lett. 58 (6): 916–919. https://doi.org/10.1016/j.matlet.2003.07.036.
Lura, P. 2003. Autogenous deformation and internal curing of concrete. Delft, Netherlands: DUP.
Lura, P., K. Van Breugel, and H. de Vries. 2000. “Moisture exchange as a basic phenomenon to understand volume changes of lightweight aggregate concrete at early age.” In Proc., Int. RILEM Workshop on Shrinkage of Concrete. Lausanne, Switzerland: RILEM Publications SARL.
Lyu, Y., H. Huang, G. Ye, and G. De Schutter. 2015. “Autogenous shrinkage of zeolite cement pastes with low water-binder ratio.” In Proc., 14th Int. Congress on the Chemistry of Cement (ICCC 2015), 1–8. Gent, Belgium: UGent.
Martys, N., and E. J. Garboczi. 1992. “Length scales relating the fluid permeability and electrical conductivity in random two-dimensional model porous media.” Phys. Rev. B 46 (10): 6080–6090. https://doi.org/10.1103/PhysRevB.46.6080.
Martys, N. S., S. Torquato, and D. P. Bentz. 1994. “Universal scaling of fluid permeability for sphere packings.” Phys. Rev. E 50 (1): 403–408. https://doi.org/10.1103/PhysRevE.50.403.
Mechtcherine, V., and H.-W. Reinhardt. 2012. Application of super absorbent polymers (SAP) in concrete construction: State-of-the-art report prepared by Technical Committee 225-SAP. Dordrecht, Netherlands: Springer.
Persson, B. 1997. “Self-desiccation and its importance in concrete technology.” Mater. Struct. 30 (5): 293–305. https://doi.org/10.1007/BF02486354.
Peyret, R., and T. D. Taylor. 1983. Computational methods for fluid flow. New York: Springer.
Poon, C. S., Z. H. Shui, and L. Lam. 2004. “Effect of microstructure of ITZ on compressive strength of concrete prepared with recycled aggregates.” Constr. Build. Mater. 18 (6): 461–468. https://doi.org/10.1016/j.conbuildmat.2004.03.005.
Reid, D. E., U. Silins, C. Mendoza, and V. J. Lieffers. 2005. “A unified nomenclature for quantification and description of water conducting properties of sapwood xylem based on Darcy’s law.” Tree Physiol. 25 (8): 993–1000. https://doi.org/10.1093/treephys/25.8.993.
Şahmaran, M., M. Lachemi, K. M. Hossain, and V. C. Li. 2009. “Internal curing of engineered cementitious composites for prevention of early age autogenous shrinkage cracking.” Cem. Concr. Res. 39 (10): 893–901. https://doi.org/10.1016/j.cemconres.2009.07.006.
Schwartz, L. M., N. Martys, D. P. Bentz, E. J. Garboczi, and S. Torquato. 1993. “Cross-property relations and permeability estimation in model porous media.” Phys. Rev. E 48 (6): 4584–4591. https://doi.org/10.1103/PhysRevE.48.4584.
Schwesinger, P., and G. Sickert. 2000. “Reducing shrinkage in HPC by internal curing by using pre-soaked LWA.” In Proc., Int. Workshop on Control of Cracking in Early-Age Concrete, 313–318. Sendai, Japan: Tohoku Univ.
Stroeven, P. 2000. “A stereological approach to roughness of fracture surfaces and tortuosity of transport paths in concrete.” Cem. Concr. Compos. 22 (5): 331–341. https://doi.org/10.1016/S0958-9465(00)00018-4.
Sun, X., Q. Dai, and K. Ng. 2014. “Computational investigation of pore permeability and connectivity from transmission X-ray microscope images of a cement paste specimen.” Constr. Build. Mater. 68 (1): 240–251. https://doi.org/10.1016/j.conbuildmat.2014.06.049.
Sun, X., B. Zhang, Q. Dai, and X. Yu. 2015. “Investigation of internal curing effects on microstructure and permeability of interface transition zones in cement mortar with SEM imaging, transport simulation and hydration modeling techniques.” Constr. Build. Mater. 76 (1): 366–379. https://doi.org/10.1016/j.conbuildmat.2014.12.014.
Trtik, P., B. Münch, W. J. Weiss, A. Kaestner, I. Jerjen, L. Josic, E. Lehmann, and P. Lura. 2011. “Release of internal curing water from lightweight aggregates in cement paste investigated by neutron and X-ray tomography.” Nucl. Instrum. Methods Phys. Res., Sect. A 651 (1): 244–249. https://doi.org/10.1016/j.nima.2011.02.012.
Voigt, T., G. Ye, Z. Sun, S. P. Shah, and K. Van Breugel. 2005. “Early age microstructure of portland cement mortar investigated by ultrasonic shear waves and numerical simulation.” Cem. Concr. Res. 35 (5): 858–866. https://doi.org/10.1016/j.cemconres.2004.09.004.
Wong, H. S., M. K. Head, and N. R. Buenfeld. 2006. “Pore segmentation of cement-based materials from backscattered electron images.” Cem. Concr. Res. 36 (6): 1083–1090. https://doi.org/10.1016/j.cemconres.2005.10.006.
Wong, H. S., K. Matter, and N. R. Buenfeld. 2013. “Estimating the original cement content and water–cement ratio of portland cement concrete and mortar using backscattered electron microscopy.” Mag. Concr. Res. 65 (11): 693–706. https://doi.org/10.1680/macr.12.00201.
Wong, H. S., M. Zobel, N. R. Buenfeld, and R. W. Zimmerman. 2009. “Influence of the interfacial transition zone and microcracking on the diffusivity, permeability and sorptivity of cement-based materials after drying.” Mag. Concr. Res. 61 (8): 571–589. https://doi.org/10.1680/macr.2008.61.8.571.
Zemajtis, J. Z. 2014. Role of concrete curing. Skokie, IL: Portland Cement Association.
Zhang, M. H., and O. E. Gjørv. 1990. “Microstructure of the interfacial zone between lightweight aggregate and cement paste.” Cem. Concr. Res. 20 (4): 610–618. https://doi.org/10.1016/0008-8846(90)90103-5.
Zhutovsky, S., K. Kovler, and A. Bentur. 2001. “Influence of wet lightweight aggregate on autogenous shrinkage of concrete at early ages.” In Proc., 6th Int. Conf. on Creep, Shrinkage and Durability Mechanics of Concrete and Other Quasi-Brittle Materials, 697–702. Amsterdam, Netherlands: Elsevier.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: Jul 16, 2017
Accepted: Aug 8, 2018
Published online: Nov 28, 2018
Published in print: Feb 1, 2019
Discussion open until: Apr 28, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.