Chemomechanical Modeling of Sulfate Attack–Induced Damage Process in Cement-Stabilized Pavements
Publication: Journal of Engineering Mechanics
Volume 145, Issue 1
Abstract
Cement-stabilized pavement layers are subject to sulfate attack (SA) in sulfate-abundant regions due to internal expansion–induced damage throughout its expected service life. SA is a coupled physical-chemical-mechanical damage process for cementitious materials involving complicated chemical reactions between sulfate and components of cement composite. SA contains intricate interactions among porous media, moisture transport, and heat transfer. Engineering mechanics has been used to explain the failure process of the internal expansion caused by this coupled physical-chemical ingress phenomenon. Existing studies have considered only heat transfer or moisture content–dependent modeling. The literature lacks a comprehensive model that considers coupled interaction of temperature and humidity upon sulfate ingression. Thus, a chemomechanical (CM) model has been developed for capturing the true failure process of cement-stabilized pavement subgrades under SA. In this paper, a set of governing equations are developed, and a unique expression for a moisture-dependent and heat-dependent sulfate diffusion coefficient is proposed. Consequently, the equations are solved using the finite-element method. The results conform well with experimental results. The model has been validated to be accurate enough compared with previously implemented models. It is capable of evaluating and predicting SA-induced expansive failure in unsaturated cement-stabilized pavements. Two different models were combined to estimate the mechanical behavior of cement-stabilized subgrades subject to SA. Finally, the Drucker-Prager (DP) failure criterion was used for determining the damage zone.
Get full access to this article
View all available purchase options and get full access to this article.
References
Bary, B. 2008. “Simplified coupled chemo-mechanical modeling of cement pastes behavior subjected to combined leaching and external sulfate attack.” Int. J. Numer. Anal. Methods Geomech. 32 (14): 1791–1816. https://doi.org/10.1002/nag.696.
Basista, M., and W. Weglewski. 2008. “Micromechanical modelling of sulphate corrosion in concrete: Influence of ettringite forming reaction.” Theory Appl. Mech. 35 (1–3): 29–52. https://doi.org/10.2298/TAM0803029B.
Basista, M., and W. Weglewski. 2009. “Chemically assisted damage of concrete: a model of expansion under external sulfate attack.” Int. J. Damage Mech. 18 (2): 155–175. https://doi.org/10.1177/1056789508097540.
Cefis, N., and C. Comi. 2017. “Chemo-mechanical modelling of the external sulfate attack in concrete.” Cem. Concr. Res. 93: 57–70. https://doi.org/10.1016/j.cemconres.2016.12.003.
Cela, J. J. L. 1998. “Analysis of reinforced concrete structures subjected to dynamic loads with a viscoplastic Drucker–Prager model.” Appl. Math. Modell. 22 (7): 495–515. https://doi.org/10.1016/S0307-904X(98)10050-1.
Clifton, J., and J. Pommersheim. 1994. Sulfate attack of cementitious materials: Volumetric. Gaithersburg. MD: National Institute of Standards and Technology.
Condor, J., K. Asghari, and D. Unatrakarn. 2011. “Experimental results of diffusion coefficient of sulfate ions in cement Type 10 and Class G.” Energy Procedia 4: 5267–5274. https://doi.org/10.1016/j.egypro.2011.02.506.
Coussy, O. 2004. Poromechanics. New York: Wiley.
Croft, J. B. 1967. “The influence of soil mineralogical composition on cement stabilization.” Geotechnique 17 (2): 119–135. https://doi.org/10.1680/geot.1967.17.2.119.
Díaz-Sánchez, M. A., and D. H. Timm. 2015. “Influence of sustainable technologies on in-place thermal properties of asphalt pavements.” In Proc., Airfield and Highway Pavements, 536–547. Reston, VA: ASCE.
Drucker, D. C., and W. Prager. 1952. “Soil mechanics and plastic analysis for limit design.” Q. Appl. Math. 10 (2): 157–165. https://doi.org/10.1090/qam/48291.
Fu, Y., P. Xie, P. Gu, and J. J. Beaudoin. 1994. “Significance of preexisting cracks on nucleation of secondary ettringite in steam-cured cement paste.” Cem. Concr. Res. 24 (6): 1015–1024. https://doi.org/10.1016/0008-8846(94)90024-8.
Gui, J., P. E. Phelan, K. E. Kaloush, and J. S. Golden. 2007. “Impact of pavement thermophysical properties on surface temperatures.” J. Mater. Civ. Eng. 19 (8): 683–690. https://doi.org/10.1061/(ASCE)0899-1561(2007)19:8(683).
Hoglund, L. 1992. “Some notes on ettringite formation in cementitious material-Influence of hydration and thermodynamic constraints for durability.” Cem. Concr. Res. 22 (2–3): 217–228. https://doi.org/10.1016/0008-8846(92)90059-5.
Jacobsen, S., and E. J. Sellevold. 1996. “Self healing of high strength concrete after deterioration by freeze/thaw.” Cem. Concr. Res. 26 (1): 55–62. https://doi.org/10.1016/0008-8846(95)00179-4.
Laidler, K. J. 1984. “The development of the Arrhenius equation.” J. Chem. Educ. 61 (6): 494. https://doi.org/10.1021/ed061p494.
Lawrence, C. 1990. “Sulphate attack on concrete.” Mag. Concr. Res. 42 (153): 249–264. https://doi.org/10.1680/macr.1990.42.153.249.
Lide, D. 2003. CRC handbook of chemistry and physics. 84th ed. Boca Raton, FL: CRC Press.
Little, D. N., and S. Nair. 2009. Recommended practice for stabilization of sulfate rich subgrade soils. Washington, DC: NCHRP.
Ming, F., Y.-S. Deng, and D.-Q. Li. 2016. “Mechanical and durability evaluation of concrete with sulfate solution corrosion.” In Advances in material sciences and engineering. Cairo, Egypt: Hindawi.
Neville, A. 2011. Properties of concrete. Essex, UK: Pearson.
Nield, D. A., and A. Bejan. 2017. Convection in porous media. New York: Springer.
Ping, X., and J. Beaudoin. 1992. “Mechanism of sulphate expansion I. Thermodynamic principle of crystallization pressure.” Cem. Concr. Res. 22 (4): 631–640. https://doi.org/10.1016/0008-8846(92)90015-N.
Rollings, R. S., J. P. Burkes, and M. P. Rollings. 1999. “Sulfate attack on cement-stabilized sand.” J. Geotech. Geoenviron. Eng. 125 (5): 364–372. https://doi.org/10.1061/(ASCE)1090-0241(1999)125:5(364).
Samson, E., J. Marchand, K. A. Snyder, and J. J. Beaudoin. 2005. “Modeling ion and fluid transport in unsaturated cement systems in isothermal conditions.” Cem. Concr. Res. 35 (1): 141–153. https://doi.org/10.1016/j.cemconres.2004.07.016.
Santhanam, M., M. D. Cohen, and J. Olek. 2002a. “Mechanism of sulfate attack: A fresh look: Part 1: Summary of experimental result.” Cem. Concr. Res. 32 (6): 915–921. https://doi.org/10.1016/S0008-8846(02)00724-X.
Santhanam, M., M. D. Cohen, and J. Olek. 2002b. “Modeling the effects of solution temperature and concentration.” Cem. Concr. Res. 32 (4): 585–592. https://doi.org/10.1016/S0008-8846(01)00727-X.
Sarkar, S., S. Mahadevan, J. Meeussen, H. V. Sloot, and D. Kosson. 2010. “Numerical simulation of cementitious materials degradation under external sulfate attack.” Cem. Concr. Compos. 32 (3): 241–252. https://doi.org/10.1016/j.cemconcomp.2009.12.005.
Skalny, J., J. Marchand, and I. Odler. 2001. Sulfate attack on concrete. 1st ed. London: CRC Press.
Skalny, J., J. Marchand, and I. Odler. 2002. Sulfate attack on concrete. London: Spon Press.
Tixiër, R., and B. Mobasher. 2003a. “Modeling of damage in cement-based materials subjected to external sulfate attack. I: Formulation.” J. Mater. Civ. Eng. 15 (4): 305–313. https://doi.org/10.1061/(ASCE)0899-1561(2003)15:4(305).
Tixiër, R., and B. Mobasher. 2003b. “Modeling of damage in cement-based materials subjected to external sulfate attack. II: Comparison with experiments.” J. Mater. Civ. Eng. 15 (4): 314–322. https://doi.org/10.1061/(ASCE)0899-1561(2003)15:4(314).
Yuan, Q., C. Shi, G. D. Schutter, and K. Audenaert. 2009. “Effect of temperature on transport of chloride ions in concrete.” In Concrete repair, rehabilitation and retrofitting II, 345–351. Leiden, Netherlands: CRC Press/A.A. Balkema.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: Aug 20, 2017
Accepted: Jun 18, 2018
Published online: Oct 22, 2018
Published in print: Jan 1, 2019
Discussion open until: Mar 22, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.