Unified Modeling of the Influence of Consolidation Conditions on Monotonic Soil Response Considering Fabric Evolution
Publication: Journal of Engineering Mechanics
Volume 144, Issue 8
Abstract
This paper proposes an anisotropic plasticity model to address the effect of consolidation conditions on the responses of soils within the framework of the anisotropic critical state theory (ACST). Double-yield surfaces are employed to describe the plastic deformation caused by both deviatoric shear and compression. A fabric tensor is defined to quantify the internal structure of soils and its evolution during the plastic deformation under both loading mechanisms is explicitly proposed. The novel expression of the fabric evolution rules allows for both “hardening” and “softening” types of variation in the fabric norm that are manifested by discrete element method simulations. A modified anisotropic variable is proposed, engaging with the effect of the anisotropic consolidation and the subsequent loading path and rendering the combined dilation–contraction deformation patterns being simulated, which are exclusively pertinent to the anisotropic consolidation conditions. The complex sand and clay responses caused by the varying consolidation conditions in terms of the anisotropic consolidation ratio and the over-consolidation ratio (OCR) can be simulated in a unified manner. The predictive capacity of the model is demonstrated by triaxial tests on both sand and clay. A satisfactory comparison is found between the model response and test results.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The support of Natural Science Foundation of China (Nos. 51578499 and 51761130078) and the National Key Basic Research Program of China (No. 2015CB057801) is gratefully acknowledged.
References
Anandarajah, A. M., and Y. F. Dafalias. 1986. “Bounding surface plasticity. III: Application to anisotropic cohesive soils.” J. Eng. Mech. 112 (12): 1292–1318. https://doi.org/10.1061/(ASCE)0733-9399(1986)112:12(1292).
Banerjee, P. K., and N. B. Yousif. 1986. “A plasticity model for the mechanical behavior of anisotropically consolidated clay.” Int. J. Numer. Anal. Methods Geomech. 10 (5): 521–541. https://doi.org/10.1002/nag.1610100505.
Been, K., and M. G. Jefferies. 1985. “A state parameter for sands.” Géotechnique 35 (2): 99–112. https://doi.org/10.1680/geot.1985.35.2.99.
Chakraborty, T., R. Salgado, and D. Loukidis. 2013. “A two-surface plasticity model for clay.” Comput. Geotech. 49: 170–190. https://doi.org/10.1016/j.compgeo.2012.https://doi.org/10.011.
Chen, Y. N., and Z. X. Yang. 2017. “A family of improved yield surfaces and their application in modeling of isotropically over-consolidated clays.” Comput. Geotech. 90: 133–143. https://doi.org/10.1016/j.compgeo.2017.06.007.
Dafalias, Y. F. 1986. “An anisotropic critical state soil plasticity model.” Mech. Res. Commun. 13 (6): 341–347. https://doi.org/10.1016/0093-6413(86)90047-9.
Dafalias, Y. F., A. G. Papadimitriou, and X. S. Li. 2004. “Sand plasticity model accounting for inherent fabric anisotropy.” J. Eng. Mech. 130 (11): 1319–1333. https://doi.org/10.1061/(ASCE)0733-9399(2004)130:11(1319).
Dafalias, Y. F., and M. Taiebat. 2013. “Anatomy of rotational hardening in clay plasticity.” Géotechnique 63 (16): 1406–1418. https://doi.org/10.1680/geot.12.P.197.
Dafalias, Y. F., and M. Taiebat. 2014. “Rotational hardening with and without anisotropic fabric at critical state.” Géotechnique 64 (6): 507–511. https://doi.org/10.1680/geot.13.T.035.
Dafalias, Y. F., and M. Taiebat. 2016. “SANISAND-Z: Zero elastic range sand plasticity model.” Géotechnique 66 (12): 999–1013. https://doi.org/10.1680/jgeot.15.P.271.
Doanh, T., E. Ibraim, and R. Matiotti. 1997. “Undrained instability of very loose Hostun sand in triaxial compression and extension. Part 1: Experimental observations.” Mech. Cohesive-Frictional Mater. 2 (1): 47–70. https://doi.org/10.1002/(SICI)1099-1484(199701)2:1%3C47::AID-CFM26%3E3.0.CO;2-9.
Gao, Z., and J. Zhao. 2015. “Constitutive modeling of anisotropic sand behavior in monotonic and cyclic loading.” J. Eng. Mech. 141 (8): 04015017. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000907.
Gao, Z., J. Zhao, X. S. Li, and Y. F. Dafalias. 2014. “A critical state sand plasticity model accounting for fabric evolution.” Int. J. Numer. Anal. Methods Geomech. 38 (4): 370–390. https://doi.org/10.1002/nag.2211.
Gao, Z., J. Zhao, and Z. Y. Yin. 2017. “Dilatancy relation for overconsolidated clay.” Int. J. Geomech. 17 (5): 06016035. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000793.
Gens, A. 1982. “Stress-strain and strength characteristics of a low plasticity clay.” Ph.D. thesis, Imperial College London.
Guo, N., and J. Zhao. 2013. “The signature of shear-induced anisotropy in granular media.” Comput. Geotech. 47: 1–15. https://doi.org/10.1016/j.compgeo.2012.07.002.
Huang, M., Y. Liu, and D. Sheng. 2011. “Simulation of yielding and stress-strain behavior of Shanghai soft clay.” Comput. Geotech. 38 (3): 341–353. https://doi.org/10.1016/j.compgeo.20https://doi.org/10.12.005.
Jiang, J., H. I. Ling, and V. N. Kaliakin. 2012. “An associative and non-associative anisotropic bounding surface model for clay.” J. Appl. Mech. 79 (3): 031010. https://doi.org/10.1115/1.4005958.
Kato, S., K. Ishihara, and I. Towhata. 2001. “Undrained shear characteristics of saturated sand under anisotropic consolidation.” Soils Found. 41 (1): 1–11. https://doi.org/10.3208/sandf.41.1.
Ladd, C. C., and J. Varallyay. 1965. The influence of stress system on the behavior of saturated clays during undrained shear. Cambridge, MA: Dept. of Civil Engineering, Massachusetts Institute of Technology.
Li, X., and X. S. Li. 2009. “Micro-macro quantification of the internal structure of granular materials.” J. Eng. Mech. 135 (7): 641–656. https://doi.org/10.1061/(ASCE)0733-9399(2009)135:7(641).
Li, X. S. 2002. “A sand model with state-dependent dilatancy.” Géotechnique 52 (3): 173–186. https://doi.org/10.1680/geot.2002.52.3.173.
Li, X. S., and Y. F. Dafalias. 2000. “Dilatancy for cohesionless soils.” Geotechnique 50 (4): 449–460. https://doi.org/10.1680/geot.2000.50.4.449.
Li, X. S., and Y. F. Dafalias. 2002. “Constitutive modeling of inherently anisotropic sand behavior.” J. Geotech. Geoenviron. Eng. 128 (10): 868–880. https://doi.org/10.1061/(ASCE)1090-0241(2002)128:10(868).
Li, X. S., and Y. F. Dafalias. 2012. “Anisotropic critical state theory: Role of fabric.” J. Eng. Mech. 138 (3): 263–275. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000324.
Ling, H. I., D. Yue, V. N. Kaliakin, and N. J. Themelis. 2002. “Anisotropic elastoplastic bounding surface model for cohesive soils.” J. Eng. Mech. 128 (7): 748–758. https://doi.org/10.1061/(ASCE)0733-9399(2002)128:7(748).
Manzari, M. T., and Y. F. Dafalias. 1997. “A critical state two-surface plasticity model for sands.” Géotechnique 47 (2): 255–272. https://doi.org/10.1680/geot.1997.47.2.255.
Oda, M., and K. Iwashita. 1999. Introduction to mechanics of granular materials. Rotterdam, Netherlands: A.A. Balkema.
Papadimitriou, A. G., Y. F. Dafalias, and M. Yoshimine. 2005. “Plasticity modeling of the effect of sample preparation method on sand response.” Soils Found. 45 (2): 109–123. https://doi.org/10.3208/sandf.45.2_109.
Pestana, J. M., and A. J. Whittle. 1999. “Formulation of a unified constitutive model for clays and sands.” Int. J. Numer. Anal. Methods Geomech. 23 (12): 1215–1243. https://doi.org/10.1002/(SICI)1096-9853(199910)23:12%3C1215::AID-NAG29%3E3.0.CO;2-F.
Stipho, A. S. A. 1978. “Experimental and theoretical investigation of the behavior of anisotropically consolidated kaolin.” Ph. D. thesis, Cardiff Univ.
Taiebat, M., and Y. F. Dafalias. 2008. “SANISAND: Simple anisotropic sand plasticity model.” Int. J. Numer. Anal. Methods Geomech. 32 (8): 915–948. https://doi.org/10.1002/nag.651.
Theocharis, A. I., E. Vairaktaris, Y. F. Dafalias, and A. G. Papadimitriou. 2017. “Proof of incompleteness of critical state theory in granular mechanics and its remedy.” J. Eng. Mech. 143 (2): 04016117. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001166.
Thornton, C. 2000. “Numerical simulations of deviatoric shear deformation of granular media.” Géotechnique 50 (1): 43–53. https://doi.org/10.1680/geot.2000.50.1.43.
Vaid, Y. P., J. D. Stedman, and S. Sivathayalan. 2001. “Confining stress and static shear effects in cyclic liquefaction.” Can. Geotech. J. 38 (3): 580–591. https://doi.org/10.1139/cgj-2012-0251.
Vermeer, P. A. 1978. “A double hardening model for sand.” Géotechnique 28 (4): 413–433. https://doi.org/10.1680/geot.1978.28.4.413.
Wan, R. G., and P. J. Guo. 2001a. “Drained cyclic behavior of sand with fabric dependence.” J. Eng. Mech. 127 (11): 1106–1116. https://doi.org/10.1061/(ASCE)0733-9399(2001)127:11(1106).
Wan, R. G., and P. J. Guo. 2001b. “Effect of microstructure on undrained behavior of sands.” Can. Geotech. J. 38 (1): 16–28. https://doi.org/10.1139/t05-014.
Wan, R. G., and P. J. Guo. 2004. “Stress dilatancy and fabric dependencies on sand behavior.” J. Eng. Mech. 130 (6): 635–645. https://doi.org/10.1061/(ASCE)0733-9399(2004)130:6(635).
Wang, Z. L., Y. F. Dafalias, and C. K. Shen. 1990. “Bounding surface hypoplasticity model for sand.” J. Eng. Mech. 116 (5): 983–1001. https://doi.org/10.1061/(ASCE)0733-9399(1990)116:5(983).
Wheeler, S. J., A. Näätänen, M. Karstunen, and M. Lojander. 2003. “An anisotropic elastoplastic model for soft clays.” Can. Geotech. J. 40 (2): 403–418. https://doi.org/10.1139/cgj-2017-0077.
Woo, S. I., and R. Salgado. 2015. “Bounding surface modeling of sand with consideration of fabric and its evolution during monotonic shearing.” Int. J. Solids Struct. 63: 277–288. https://doi.org/10.1016/j.ijsolstr.2015.03.005.
Yang, C., D. Sheng, J. P. Carter, and S. W. Sloan. 2015. “Modelling the plastic anisotropy of Lower Cromer Till.” Comput. Geotech. 69: 22–37. https://doi.org/10.1016/j.compgeo.2015.04.013.
Yang, Z. X., X. S. Li, and J. Yang. 2008. “Quantifying and modelling fabric anisotropy of granular soils.” Géotechnique 58 (4): 237–248. https://doi.org/10.1680/geot.2008.58.4.237.
Yang, Z. X., and Y. Wu. 2017. “Critical state for anisotropic granular materials: A discrete element perspective.” Int. J. Geomech. 17 (2): 04016054. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000720.
Yao, Y. P., and Y. X. Kong. 2012. “Extended UH model: Three-dimensional unified hardening model for anisotropic clays.” J. Eng. Mech. 38 (7): 853–866. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000397.
Zhao, J., and Z. Gao. 2015. “Unified anisotropic elastoplastic model for sand.” J. Eng. Mech. 142 (1): 04015056. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000962.
Zhao, J., and N. Guo. 2013. “Unique critical state characteristics in granular media considering fabric anisotropy.” Géotechnique 63 (8): 695–704. https://doi.org/10.1680/geot.12.P.040.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: Dec 13, 2017
Accepted: Mar 5, 2018
Published online: Jun 14, 2018
Published in print: Aug 1, 2018
Discussion open until: Nov 14, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.