Upper-Bound Finite-Element Limit Analysis of Axisymmetric Problems for Mohr-Coulomb Materials Using Semidefinite Programming
Publication: Journal of Engineering Mechanics
Volume 144, Issue 7
Abstract
An upper-bound formulation for performing finite-element limit analysis by using semidefinite programming (SDP) for an axisymmetric stability problem involving the Mohr-Coulomb yield criterion has been presented. The SDP technique has an advantage in that it can deal with the yield criterion directly in its native form in terms of principal stresses and strains without any smoothing of the parent yield surface. The associated flow rule and plastic power dissipation are expressed entirely in terms of principal plastic strain rates. Nodal velocities and element plastic strain rates were framed as basic governing variables without involving stresses. The solution was obtained by using the SDP solver MOSEK in MATLAB. The problem of finding the bearing capacity of a circular footing was dealt with by choosing a planar domain that was discretized with (1) three-noded constant strain finite elements and (2) six-noded linear strain finite elements. The results were obtained with and without the provision of the velocity discontinuities, and were compared with those reported in literature. It was learned that quite accurate solutions can be obtained with the application of six-noded linear strain triangular elements and using velocity discontinuities along all the elements’ interfaces.
Get full access to this article
View all available purchase options and get full access to this article.
References
Alizadeh, F. 1995. “Interior point methods in semidefinite programming with applications to combinational optimization.” SIAM J. Optim. 5 (1): 13–51.
Anderheggan, E., and H. Knofel. 1972. “Finite element limit analysis using linear programming.” Int. J. Solids Struct. 8 (12): 1413–1431.
Antao, A. N., M. V. Silva, N. Guerra, and R. Delgado. 2012. “An upper bound-based solution for shape factors of bearing capacity of footings under drained conditions using a paralyzed mixed finite element formulation with quadratic velocity fields.” Comput. Geotech. 41 (Apr): 23–35.
Boyd, S., and L. Vandenberghe. 2004. Convex optimization. Cambridge, UK: Cambridge University Press.
Chakraborty, D., and J. Kumar. 2014. “Solving axisymmetric stability problems by using upper bound finite elements limit analysis, and linear optimization.” J. Eng. Mech. 140 (6): 06014004.
Chakraborty, M., and J. Kumar. 2015. “Lower bound axisymmetric formulation for geomechanics problem using nonlinear optimization.” Int. J. Geomech. 15 (5): 06014024.
Chen, W. F., and D. J. Han. 1988. Plasticity for structural engineering. New York: Springer.
Cook, R. D., D. S. Malkus, M. E. Plesha, and R. J. Witt. 2002. Concepts and applications of finite element analysis. 4th ed. New York: Wiley.
Jirásek, M., and Z. P. Bažant. 2002. Inelastic analysis of structures. Chichester, UK: Wiley.
Kong, D., C. M. Martin, and B. Byrne. 2017. “Modelling large plastic deformations of cohesive soils using sequential limit analysis.” Int. J. Numer. Anal. Methods Geomech. 41 (18): 1781–1806.
Krabbenhoft, K., A. V. Lyamin, M. Hjiaj, and S. W. Sloan. 2005. “A new discontinuous upper bound limit analysis formulation.” Int. J. Numer. Methods Eng. 63 (7): 1069–1088.
Kumar, J., and M. Chakraborty. 2014. “Upper-bound axisymmetric limit analysis using the Mohr-Coulomb yield criterion, finite elements, and linear optimization.” J. Eng. Mech. 140 (12): 06014012.
Kumar, J., and V. N. Khatri. 2011. “Bearing capacity factors of circular foundations for a general soil using lower bound finite elements limit analysis.” Int. J. Numer. Anal. Methods Geomech. 35 (3): 393–405.
Kumar, J., and K. M. Kouzer. 2007. “Effect of footing roughness on bearing capacity factor.” J. Geotech. Environ. Eng. 133 (5): 502–511.
Kumar, J., and D. Mohapatra. 2017. “Lower bound finite elements limit analysis for Hoek-Brown materials using semidefinite programming.” J. Eng. Mech. 143 (9): 04017077.
Lyamin, A. V., and S. W. Sloan. 2002a. “Lower bound limit analysis using non-linear programming.” Int. J. Numer. Methods Eng. 55 (5): 573–611.
Lyamin, A. V., and S. W. Sloan. 2002b. “Upper bound limit analysis using linear finite elements and nonlinear programming.” Int. J. Numer. Anal. Methods Geomech. 26 (2): 181–216.
Makrodimopoulos, A. 2010. “Remarks on some properties of conic yield restrictions in limit analysis.” Int. J. Numer. Method Biomed. Eng. 26 (11): 1449–1461.
Makrodimopoulos, A., and C. M. Martin. 2007. “Upper bound limit analysis using simplex strain elements and second-order cone programming.” Int. J. Numer. Anal. Methods Geomech. 31 (6): 835–865.
Makrodimopoulos, A., and C. M. Martin. 2008. “Upper bound limit analysis using discontinuous quadratic displacement field.” Commun. Numer. Methods Eng. 24 (11): 911–927.
Martin, C. M. 2004. “ABC: Analysis of bearing capacity.” Accessed October, 2017. http://www.eng.ox.ac.uk/civil/people/cmm/software.
Martin, C. M., and A. Makrodimopoulos. 2008. “Finite element limit analysis of Mohr-Coulomb material in 3D using semidefinite programming.” J. Eng. Mech. 134 (4): 339–347.
Munoz, J. J., J. Bonet, A. Huerta, and J. Perire. 2009. “Upper and lower bounds in limit analysis: Adaptive meshing strategies and discontinuous loading.” Int. J. Numer. Methods Eng. 77 (4): 471–501.
Munoz, J. J., A. Huerta, J. Bonet, and J. Peraire. 2012. “A note on upper bound formulations in limit analysis.” Int. J. Numer. Methods Eng. 91 (8): 896–908.
Nagtegaal, J. C., D. M. Parks, and J. R. Rice. 1974. “On numerically accurate finite element solutions in the fully plastic range.” Comput. Methods Appl. Mech. Eng. 4 (2): 153–177.
Pastor, J. 1978. “Analyse limite: détermination numérique de solutions statiques complètes. Application au talus vertical.” Journal de Mécanique appliquée 2 (2): 167–196 [In French.].
Pastor, J., and S. Turgeman. 1982a. “Limit analysis in axisymmetrical problems: Numerical determination of complete statistical solution.” Int. J. Mech. Sci. 24 (2): 95–117.
Pastor, J., and S. Turgeman. 1982b. “Limit analysis: A linear formulation of kinematic approach for axisymmetric mechanic problems.” Int. J. Numer. Anal. Methods Geomech. 6 (1): 109–128.
Salençon, J. 1977. Applications of the theory of plasticity in soil mechanics. Chichester, UK: Wiley.
Salençon, J. 1990. “An introduction to the yield design theory and its applications to soil mechanics.” Eur. J. Mech. A Solids. 9 (5): 477–500.
Salençon, J. 2002. De l’élasto-plasticité au calcul de la rupture. 1st ed. [In French.] Paris: Les éditions de l’école Polytechnique.
Silva, M. V., and A. N. Antao. 2007. “A nonlinear programming method approach for upper bound limit analysis.” Int. J. Numer. Methods Eng. 72 (10): 1192–1218.
Silva, M. V., and A. N. Antao. 2008. “Upper bound limit analysis with a parallel mixed finite element formulation.” Int. J. Solids Struct. 45 (22–23): 5788–5804.
Silva, M. V., and A. N. Antao. 2012. “A novel augmented Lagrangian-based formulation for upper-bound limit analysis.” Int. J. Numer. Methods Eng. 89 (12): 1471–1496.
Sloan, S. W. 1989. “Upper bound limit analysis using finite elements and linear programming.” Int. J. Numer. Anal. Methods Geomech. 13 (3): 263–282.
Sloan, S. W., and P. W. Kleeman. 1995. “Upper bound limit analysis using discontinuous velocity fields.” Comput. Methods Appl. Mech. Eng. 127 (1–4): 293–314.
Tang, C., K. Toh, and K. Phoon. 2014. “Axisymmetric lower bound limit analysis using finite elements and second order cone programming (SOCP).” J. Eng. Mech. 140 (2): 268–278.
Terzaghi, K. 1943. Theoretical soil mechanics. New York: Wiley.
Vandenberghe, L., and S. Boyd. 1996. “Semidefinite programming.” SIAM Rev. 38 (1): 49–95.
Yu, H. S., S. W. Sloan, and P. W. Kleeman. 1994. “A quadratic element for upper bound limit analysis.” Eng. Comput. 11 (3): 195–212.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: Oct 1, 2017
Accepted: Dec 28, 2017
Published online: Apr 24, 2018
Published in print: Jul 1, 2018
Discussion open until: Sep 24, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.