Effect of Piped Water Cooling on Thermal Stress in Mass Concrete at Early Ages
Publication: Journal of Engineering Mechanics
Volume 144, Issue 3
Abstract
The heat evolved during the hydration process may not dissipate properly due to the large size and poor thermal conductivity of mass concrete. Embedded cooling pipes of circulating water are generally used for heat removal from the interior of the concrete mass. This study experimentally shows that forced cooling helps reduce the interior temperature significantly; however, it leads to a reverse thermal gradient around the cooling pipe. This paper conducts a three-dimensional finite-element simulation of the hydration heat in concrete with a forced cooling system, modeling the circulating water with three-dimensional elements with diffusion and dispersion properties which accurately predict the experimentally observed temperature profile. Finite-element analysis also indicates the presence of high thermal stresses in concrete near the cooling pipe, mainly due to the extreme temperature gradient and temperature fluctuations. The results suggest a careful monitoring of heat removal using forced cooling to avoid a large thermal gradient and the likelihood of cracking.
Get full access to this article
View all available purchase options and get full access to this article.
References
ABAQUS [Computer software]. Dassault Systèmes, Providence, RI.
ACI (American Concrete Institute). (1999). “Specifications for structural concrete.” ACI 301M-99, Farmington Hills, MI.
ACI (American Concrete Institute). (2005a). “Cooling and insulating system for mass concrete.” ACI 207.4R-05, Farmington Hills, MI.
ACI (American Concrete Institute). (2005b). “Mass concrete.” ACI 207.1R-05, Farmington Hills, MI.
ASHRAE (American Society of Heating, Refrigerating and Air-Conditioning Engineers). (1977). ASHRAE handbook and product directory: 1977 fundamentals, New York.
Beaver, W. (2004). “Liquid nitrogen for concrete cooling.” ACI Mater. J., 26(9), 93–95.
Benzt, D. P. (2007). “Transient plane source measurements of the thermal properties of hydrating cement pastes.” Mater. Struct., 40(10), 1073–1080.
Benzt, D. P., Waller, V., and de Larrard, D. (1998). “Prediction of adiabatic temperature rise in conventional and high-performance concrete using a 3-D microstructural model.” Cem. Concr. Res., 28(2), 285–297.
BIS (Bureau of Indian Standards). (2004). “Methods of tests for strength of concrete.” IS 516, New Delhi, India.
BIS (Bureau of Indian Standards). (2013). “Ordinary portland cement, 43 grade—Specification.” IS 8112, New Delhi, India.
Bombich, T., Garner, S., Jones, W., and Norman, C. D. (1987). “Thermal stress analysis of Mississippi River lock and dam 26(R).”, Waterway Experiment Station, U.S. Army Corps of Engineers, Washington, DC.
Branco, F. A., Mendes, P., and Mirambell, E. (1992). “Heat of hydration effects in concrete structures.” ACI Mater. J., 89(2), 139–145.
CEB (Comité Euro-International du Béton). (1990). “Final draft CEB-FIP model code 1990.” CEB-90, Paris.
Chen, S. H., Su, P., and Shahrour, I. (2011). “Composite element algorithm for the thermal analysis of mass concrete.” Int. J. Numer. Methods Heat Fluid Flow, 21(4), 434–447.
De Schutter, G., and Taerwe, L. (1996). “Degree of hydration-based description of mechanical properties of early age concrete.” Mater. Struct., 29(6), 335–344.
Faria, R., Azenha, M., and Figueiras, J. A. (2006). “Modelling of concrete at early ages: Application to an externally restrained slab.” Cem. Concr. Compos., 28(6), 572–585.
Garner, S., Hammons, M., and Bombich, A. (1991). “Red River Waterway thermal studies. Report 2: Thermal stress analysis.”, Waterway Experiment Station, U.S. Army Corps of Engineers, Washington, DC.
Khan, M. I. (2002). “Factors affecting the thermal properties of concrete and applicability of its prediction models.” Build. Environ., 37(6), 607–614.
Kim, J. K., Kim, K. H., and Yang, J. K. (2001). “Thermal analysis of hydration heat in concrete structures with pipe-cooling system.” Comput. Struct., 79(2), 163–171.
Kjellsen, K. O., Detwiler, R. J., and Gjorv, O. E. (1991). “Development of microstructures in plain cement pastes hydrated at different temperature.” Cem. Concr. Res., 21(1), 179–189.
Klemens, P. G. (1969). Theory of the thermal conductivity of solids, Vol. 1, Academic, London.
Kyle, A. R., Jonathan, L. P., Anton, K. S., Maria, C. G. J., and Kevin, J. F. (2006). “Evaluation of temperature prediction methods for mass concrete members.” ACI Mater. J., 103(5), 357–365.
LabVIEW [Computer software]. National Instruments Corporation, Austin, TX.
Liu, X., Zhang, C., Chang, X., Zhou, W., Cheng, Y., and Duan, Y. (2015). “Precise simulation analysis of the thermal field in mass concrete with a pipe water cooling system.” Appl. Therm. Eng., 78, 449–459.
Maria, C. G., Juenger, S. M. S., and John, H. (2010). “Effects of liquid nitrogen cooling on fresh concrete properties.” ACI Mater. J., 107(2), 123–131.
Ng, P. L., Ng, I. Y. T., and Kwan, A. K. H. (2008). “Heat loss compensation in semi-adiabatic curing test of concrete,” ACI Mater. J., 105(1), 52–61.
Qomi, M. J. A., Ulm, F. J., and Pellenq, R. J. M. (2015). “Physical origins of thermal properties of cement paste.” Phys. Rev. Appl., 3(064010), 1–17.
Roush, K., and O’Leary, J. (2005). “Cooling concrete with embedded pipes.” ACI Mater. J., 27(5), 30–32.
Swaddiwudhipong, S., Chen, D., and Zhang, M. H. (2002). “Simulation of the exothermic hydration process of portland cement.” Adv. Cem. Res., 14(2), 61–69.
Ulm, F. J., and Olivier, C. (2001). “What is a ‘massive’ concrete structure at early ages? Some dimensional argument.” J. Eng. Mech., 512–522.
U.S. Army Corps of Engineers. (1994). “Nonlinear incremental structural analysis of massive concrete structures.”, Washington, DC.
U.S. Bureau of Reclamation. (1940). “Thermal properties of concrete.”, U.S. Bureau of Reclamations, Denver.
Van Breugel, K. (1980). Artificial cooling of hardening concrete, Delft Univ. of Technology, Delft, Netherlands.
Zhou, Y., Morshedifard, A., Lee, J., and Qomi, M. J. A. (2017). “The contribution of propagons and diffusons in heat transport through calcium-silicate-hydrates.” Appl. Phys. Lett., 110(043104), 1–5.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Dec 30, 2016
Accepted: Aug 31, 2017
Published online: Dec 28, 2017
Published in print: Mar 1, 2018
Discussion open until: May 28, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.