Incremental Analysis of Elastoplastic Beams and Frames Resting on an Elastic Half-Plane
Publication: Journal of Engineering Mechanics
Volume 143, Issue 9
Abstract
In this work, a simple and effective finite element-boundary integral equation (FE-BIE) approach for the static analysis of elastic beams and frames in bilateral frictionless contact with an elastic half-plane is extended to include the case of material nonlinearity. Elastic-perfectly plastic behavior is assumed for the supported structure and in particular for the foundation beam. Potential plastic hinges are placed along structural elements and modeled as nonlinear semirigid connections characterized by a rigid-plastic moment-rotation relationship. Incremental, load-controlled analyses of beams and frames resting on an elastic half-plane with several potential plastic hinges along the structural members are then performed. Numerical examples illustrate the effectiveness of the model in determining the stiffness degradation of the structure for increasing loads, together with ultimate loads and collapse mechanisms.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The present investigation was developed in the framework of the Research Program FAR 2016 of the University of Ferrara. Moreover, the analyses were developed within the activities of the (Italian) University Network of Seismic Engineering Laboratories—ReLUIS in the research program funded by the (Italian) National Civil Protection—Progetto Esecutivo 2014–2016—Research Line Reinforced Concrete Structures and Innovative materials.
References
Allen, H. G. (1969). Analysis and design of structural sandwich panels, Pergamon Press, Oxford, U.K.
Augusti, G. (1970). “Mode approximations for rigid-plastic structures supported by an elastic medium.” Int. J. Solids Struct., 6(6), 809–827.
Baraldi, D. (2013). “Nonlinear analysis of structures on elastic half-space by a FE-BIE approach.” Ph.D. thesis, Univ. of Ferrara, Engineering Dept., Ferrara, Italy.
Barros, J. A. O., and Figueiras, J. A. (2001). “Model for the analysis of steel fibre reinforced concrete slabs on grade.” Comput. Struct., 79(1), 97–106.
Baumann, R., and Weisgerber, F. (1983). “Yield-line analysis of slabs-on-grade.” J. Struct. Eng., 1553–1568.
Belenkiy, L. (2007). “Upper-bound solutions for rigid-plastic plates and slabs on elastic foundation by the principle of stationary total energy.” J. Struct. Eng., 305–307.
Bhat, S., and Xirouchakis, P. (1985). “Rigid-plastic analysis of floating plates.” J. Eng. Mech., 815–831.
Bhat, S., and Xirouchakis, P. (1986). “Plastic analysis of floating beams.” J. Eng. Mech., 198–214.
Biot, M. A. (1937). “Bending of an infinite beam on an elastic foundation.” J. Appl. Mech. Trans., 4, A1–A7.
CEN (European Committee for Standardization). (2004). “Design of concrete structures. 1-1: General rules and rules for buildings.”, Brussels, Belgium.
Challamel, N., Meftah, S. A., and Bernard, F. (2010). “Buckling of elastic beams on non-local foundation: A revisiting of Reissner model.” Mech. Res. Commun., 37(5), 472–475.
Chen, W. F., and Lui, E. M. (2005). Handbook of structural engineering, 2nd Ed., CRC Press, Boca Raton.
Clough, R. W., and Johnston, S. B. (1966). “Effect of stiffness degradation on earthquake ductility requirements.” Transactions of Japan Earthquake Engineering Symp., Tokyo, 195–198.
Davies, J. M. (2001). Lightweight sandwich construction, Blackwell Science, Oxford, U.K.
Di Paola, M., Marino, F., and Zingales, M. (2009). “A generalized model of elastic foundation based on long-range interactions: Integral and fractional model.” Int. J. Solids Struct., 46(17), 3124–3137.
Failla, G., Santini, A., and Zingales, M. (2013). “A non-local two-dimensional foundation model.” Arch. Appl. Mech., 83(2), 253–272.
Gazetas, G., and Tassios, T. P. (1978). “Elastic-plastic slabs on elastic foundations.” J. Struct. Div., 104(4), 621–636.
Giberson, M. (1969). “Two nonlinear beams with definition of ductility.” J. Struct. Div., 95(2), 137–157.
Hasan, R., Xu, L., and Grierson, D. E. (2002). “Push-over analysis for performance based-seismic design.” Comput. Struct., 80(31), 2483–2493.
Johnson, K. L. (1985). Contact mechanics, Cambridge University Press, Cambridge, U.K.
Kerr, A. D. (1986). “Response of floating ice beams and plates with partial flooding.” Ice Technology, Proc., 1st Int. Conf., MIT, Cambridge, MA, 75–86.
Lanzoni, L., Radi, E., and Nobili, A. (2014). “Ultimate carrying capacity of elastic-plastic plates on a Pasternak foundation.” J. App. Mech. T. ASME, 81(5), 051013.
Mancini, G. (2010). “Design of members. Linear members.” Structural concrete textbook on behaviour, design and performance, 2nd Ed., Vol. 4, International Federation for Structural Concrete, Lausanne, Switzerland, 37–60.
Meda, A., and Plizzari, G. A. (2004). “New design approach for steel fiber-reinforced concrete slabs-on-ground based on fracture mechanics.” ACI Struct. J., 101(3), 298–303.
Meyerhof, G. G. (1962a). “Bearing capacity of floating ice sheets.” T. Am. Soc. Civil Eng., 127(1), 524–556.
Meyerhof, G. G. (1962b). “Load-carrying capacity of concrete pavements.” J. Soil Mech. Found. Div., 88(3), 89–115.
Minghini, F., Tullini, N., and Laudiero, F. (2009). “Elastic buckling analysis of pultruded FRP portal frames having semi-rigid connections.” Eng. Struct., 31(2), 292–299.
Minghini, F., Tullini, N., and Laudiero, F. (2010). “Vibration analysis of pultruded FRP frames with semi-rigid connections.” Eng. Struct., 32(10), 3344–3354.
Monforton, G. R., and Wu, T. S. (1963). “Matrix analysis of semi-rigidly connected steel frames.” J. Struct. Div., 89(6), 13–24.
Paggi, M., Pohrt, R., and Popov, V. L. (2014). “Partial-slip frictional response of rough surfaces.” Sci. Rep., 4(1), 5178.
Rao, K., and Singh, S. (1986). “Concentrated load-carrying capacity of concrete slabs on ground.” J. Struct. Eng., 2628–2645.
Selvadurai, A. P. S. (1979). Elastic analysis of soil-foundation interaction, Elsevier, New York.
Shakourzadeh, H., Guo, Y. Q., and Batoz, J. (1999). “Modeling of connections in the analyses of thin-walled space frames.” Comput. Struct., 71(4), 423–433.
Shentu, L., Jiang, D., and Hsu, C. (1997). “Load-carrying capacity for concrete slabs on grade.” J. Struct. Eng., 95–103.
Sorelli, L. G., Meda, A., and Plizzari, G. A. (2006). “Steel fiber reinforced slabs on ground: A structural matter.” ACI Struct. J., 103(4), 551–558.
Tezzon, E., Tullini, N., and Lanzoni, L. (2016). “A coupled FE-BIE model for the static analysis of Timoshenko beams bonded to an orthotropic elastic half-plane.” Eng. Anal. Bound. Elem., 71, 112–128.
Tezzon, E., Tullini, N., and Minghini, F. (2015). “Static analysis of shear flexible beams and frames in adhesive contact with an isotropic elastic half-plane using a coupled FE-BIE model.” Eng. Struct., 104, 32–50.
Tullini, N., and Tralli, A. (2010). “Static analysis of Timoshenko beam resting on elastic half-plane based on coupling of locking-free elements and boundary integral.” Comput. Mech., 45(2–3), 211–225.
Tullini, N., Tralli, A., and Baraldi, D. (2013a). “Buckling of timoshenko beams in frictionless contact with an elastic half-plane.” J. Eng. Mech., 824–831.
Tullini, N., Tralli, A., and Baraldi, D. (2013b). “Stability of slender beams and frames resting on 2D half-space.” Arch. Appl. Mech., 83(3), 467–482.
Vesic, A. B. (1961). “Bending of beams resting on isotropic elastic solid.” J. Eng. Mech. Div., 87(2), 35–53.
Zingone, G. (1968). “Limit analysis of a beam in bending immersed in an elastoplastic medium.” Meccanica, 3(1), 48–56.
Zingone, G. (1972). “The limit state of indefinite plates on elastoplastic continuum.” Meccanica, 7(2), 117–123.
Zingone, G. (1973). “Ultimate load analysis of plate foundations.” Meccanica, 8(4), 243–251.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Nov 3, 2016
Accepted: Apr 5, 2017
Published online: Jun 30, 2017
Published in print: Sep 1, 2017
Discussion open until: Nov 30, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.