Linear Solution for Liquid Sloshing in an Upright Elliptical Cylindrical Container with an Eccentric Core Barrel
Publication: Journal of Engineering Mechanics
Volume 143, Issue 9
Abstract
A three-dimensional hydrodynamic analysis founded on the linear water wave theory and separation of variables in elliptical coordinates is undertaken to investigate the free sloshing characteristics in the doubly connected fluid domain of an upright (rigid-walled) cylindrical vessel of elliptical cross section that contains an internal (nonconfocal) elliptical core barrel of arbitrary size, aspect ratio, location, and orientation. The lateral tank boundary (impenetrability) condition is imposed by using the addition theorems for Mathieu functions, and a () truncated set of algebraic equations is eventually obtained after application of the relevant orthogonality relations. Extensive numerical experiments include plots of the first five sloshing wave numbers as functions of the (normalized) barrel eccentricity, for selected tank/barrel aspect ratios, barrel angular locations/orientations, and size. Also, the first four dimensionless natural sloshing frequencies are tabulated for selected liquid elevations and a wide range of geometrical configurations. Moreover, certain two-dimensional images of the liquid free-surface oscillation mode shapes are graphically portrayed. The prominent (moderate) effects of container cross-sectional ellipticity and barrel eccentricity (barrel aspect ratio and angular location/orientation) on the liquid sloshing characteristics are noted. In particular, in the circular tank configuration, several frequency clusters are formed among contiguous frequency branches that progressively merge together as the barrel eccentricity decreases (problem symmetry increases), leading to repeated doublet frequencies. Also, at certain barrel eccentricities, frequency crossovers (mode crossings) between different frequency branches are observed. Accuracy of simulations is confirmed by using a standard finite-element package in addition to comparisons with the existing literature data.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to sincerely thank the demanding reviewers whose constructive criticisms led to substantial improvement of the manuscript.
References
Abramowitz, M., and Stegun, I. A. (1964). Handbook of mathematical functions: With formulas, graphs, and mathematical tables, Dover Publications, New York.
Ananthakumar, N., and Rajesh, K. (2014). “Slosh analysis of launch vehicle using arbitrary Lagrangian Eulerian method-review.” Int. Conf. on Advanced Trends in Engineering and Technology, Bonfring, Coimbatore, India, 70–73.
Askari, E., and Daneshmand, F. (2009). “Coupled vibration of a partially fluid-filled cylindrical container with a cylindrical internal body.” J. Fluids Struct., 25(2), 389–405.
Askari, E., and Daneshmand, F. (2010). “Coupled vibration of cantilever cylindrical shells partially submerged in fluids with continuous, simply connected and non-convex domain.” J. Sound Vib., 329(17), 3520–3536.
Askari, E., Daneshmand, F., and Amabili, M. (2011). “Coupled vibrations of a partially fluid-filled cylindrical container with an internal body including the effect of free surface waves.” J. Fluids Struct., 27(7), 1049–1067.
Aslam, M., Scalise, D., and Godden, W. (1979). “Earthquake sloshing in annular and cylindrical tanks.” J. Eng. Mech. Div., 105(3), 371–389.
Chatjigeorgiou, I. K. (2011). “Three dimensional wave scattering by arrays of elliptical and circular cylinders.” Ocean Eng., 38(13), 1480–1494.
Chatjigeorgiou, I. K. (2013). “The hydrodynamics of arrays of truncated elliptical cylinders.” Eur. J. Mech. B Fluids, 37, 153–164.
Chatjigeorgiou, I. K., and Mavrakos, S. A. (2010). “An analytical approach for the solution of the hydrodynamic diffraction by arrays of elliptical cylinders.” Appl. Ocean Res., 32(2), 242–251.
Chiba, M. (1995). “Free vibration of a clamped-free circular cylindrical shell partially submerged in a liquid.” J. Acoust. Soc. Am., 97(4), 2238–2248.
Chiba, M., and Osumi, H. (1998). “Free vibration and buckling of a partially submerged clamped cylindrical tank under compression.” J. Sound Vib., 209(5), 771–796.
COMSOL [Computer software]. COMSOL, Inc., Burlington, MA.
Diamanti, K., Doukas, I., and Karamanos, S. A. (2011). “Seismic analysis and design of industrial pressure vessels.” III ECCOMAS Thematic Conf. on Computational Methods in Structural Dynamics and Earthquake Engineering, COMPDYN, Corfu, Greece.
Drake, K. (1999). “The effect of internal pipes on the fundamental frequency of liquid sloshing in a circular tank.” Appl. Ocean Res., 21(3), 133–143.
Faltinsen, O. M., and Timokha, A. N. (2009). Sloshing, Cambridge University Press, New York.
Firouz-Abadi, R. D., Haddadpour, H., and Ghasemi, M. (2009). “Reduced order modeling of liquid sloshing in 3D tanks using boundary element method.” Eng. Anal. Boundary Elem., 33(6), 750–761.
Fujita, K., Ito, T., and Okada, K. (1986). “Seismic response of liquid sloshing in the annular region formed by coaxial circular cylinders.” Bull. JSME, 29(258), 4318–4325.
Hasheminejad, S. M., and Aghabeigi, M. (2012). “Sloshing characteristics in half-full horizontal elliptical tanks with vertical baffles.” Appl. Math. Modell., 36(1), 57–71.
Hasheminejad, S. M., and Ghaheri, A. (2014). “Exact solution for free vibration analysis of an eccentric elliptical plate.” Arch. Appl. Mech., 84(4), 543–552.
Hasheminejad, S. M., and Mirzaei, Y. (2009). “Free vibration analysis of an eccentric hollow cylinder using exact 3D elasticity theory.” J. Sound Vib., 326(3–5), 687–702.
Hasheminejad, S. M., and Mohammadi, M. M. (2011). “Effect of anti-slosh baffles on free liquid oscillations in partially filled horizontal circular tanks.” Ocean Eng., 38(1), 49–62.
Hasheminejad, S. M., Moshrefzadeh, A., and Jarrahi, M. (2013a). “Transient sloshing in partially filled laterally excited spherical vessels.” J. Eng. Mech., 802–813.
Hasheminejad, S. M., Rezaei, S., and Shakeri, R. (2013b). “Flexural transient response of elastically supported elliptical plates under in-plane loads using Mathieu functions.” Thin-Walled Struct., 62, 37–45.
Hasheminejad, S. M., and Tafani, M. (2014). “Coupled hydroelastic vibrations of an elliptical cylindrical tank with an elastic bottom.” J. Hydrodyn. Ser. B, 26(2), 264–276.
Ibrahim, R. A. (2005). Liquid sloshing dynamics: Theory and applications, Cambridge University Press, New York.
Jeong, K.-H. (1999). “Dynamics of a concentrically or eccentrically submerged circular cylindrical shell in a fluid-filled container.” J. Sound Vib., 224(4), 709–732.
Jeong, K.-H., Lee, G.-M., and Chang, M.-H. (2001). “Free vibration analysis of a cylindrical shell eccentrically coupled with a fluid-filled vessel.” Comput. Struct., 79(16), 1517–1524.
Kabayashi, N., Mieda, T., Shibata, H., and Shinozaki, Y. (1989). “A study of the liquid slosh response in horizontal cylindrical tanks.” J. Pressure Vessel Technol., 111(1), 32–38.
Kagemoto, H., and Yue, D. K. (1986). “Interactions among multiple three-dimensional bodies in water waves: An exact algebraic method.” J. Fluid Mech., 166, 189–209.
Karamanos, S. A., Papaprokopiou, D., and Platyrrachos, M. A. (2009). “Finite element analysis of externally-induced sloshing in horizontal-cylindrical and axisymmetric liquid vessels.” J. Pressure Vessel Technol., 131(5), 051301.
Koller, M. G., Baltas, C., and Lestuzzi, P. (2014). “Seismic assessment of horizontal cylindrical reservoirs.” Seismic design of industrial facilities, Springer, Wiesbaden, Germany, 461–472.
Liu, W. K., and Gvildys, J. (1986). “Fluid-structure interaction of tanks with an eccentric core barrel.” Comput. Methods Appl. Mech. Eng., 58(1), 51–77.
Maleki, A., and Ziyaeifar, M. (2008). “Sloshing damping in cylindrical liquid storage tanks with baffles.” J. Sound Vib., 311(1), 372–385.
Malhotra, P. K., Nimse, P., and Meekins, M. (2014). “Seismic sloshing in a horizontal liquid storage tank.” Struct. Eng. Int., 24(4), 466–473.
MATLAB [Computer software]. MathWorks, Natick, MA.
Meixner, J., and Schäfke, F. W. (2013). Mathieu functions and spheroidal functions: With applications to physical and technical problems, Springer, Berlin.
Mitra, S., Upadhyay, P., and Sinhamahapatra, K. (2008). “Slosh dynamics of inviscid fluids in two-dimensional tanks of various geometry using finite element method.” Int. J. Numer. Methods Fluids, 56(9), 1625–1651.
Nayak, S. K., and Biswal, K. C. (2015). “Fluid damping in rectangular tank fitted with various internal objects—An experimental investigation.” Ocean Eng., 108, 552–562.
Ohno, K.-I., Suzuki, H., and Sawada, T. (2011). “Analysis of liquid sloshing of a tuned magnetic fluid damper for single and co-axial cylindrical containers.” J. Magn. Magn. Mater., 323(10), 1389–1393.
Oliva-Leyva, M., de Cossío, J. F., and Trallero-Giner, C. (2014). “Free wave modes in elliptic cylindrical containers.” Eur. J. Mech. B Fluids, 43, 185–190.
Olver, F. W. J. (2010). NIST handbook of mathematical functions, Cambridge University Press, New York.
Pal, N., Bhattacharyya, S., and Sinha, P. (2003). “Non-linear coupled slosh dynamics of liquid-filled laminated composite containers: A two dimensional finite element approach.” J. Sound Vib., 261(4), 729–749.
Patkas, L. A., and Karamanos, S. A. (2006). “Variational analysis of sloshing in spherical industrial vessels under earthquake loading.” Proc., ASME 2006 Pressure Vessels and Piping/ICPVT-11 Conf., ASME, New York, 1417–1425.
Patkas, L. A., and Karamanos, S. A. (2007). “Variational solutions for externally induced sloshing in horizontal-cylindrical and spherical vessels.” J. Eng. Mech., 641–655.
Shibata, H., Tokuda, N., and Sakurai, T. (1995). “Sloshing test of a cylindrical tank with an eccentric core barrel.” ASME Publ. PVP, 310, 55–62.
Song, Y. K., Chang, K.-A., Ryu, Y., and Kwon, S. H. (2013). “Experimental study on flow kinematics and impact pressure in liquid sloshing.” Exp. Fluids, 54(9), 1–20.
Takahara, H., Hara, K., and Ishida, T. (2012). “Nonlinear liquid oscillation in a cylindrical tank with an eccentric core barrel.” J. Fluids Struct., 35, 120–132.
Takahara, H., and Kimura, K. (2012). “Frequency response of sloshing in an annular cylindrical tank subjected to pitching excitation.” J. Sound Vib., 331(13), 3199–3212.
Takahara, H., Nakatsugawa, E., and Nakano, Y. (2015). “Liquid oscillation in a rectangular tank with a core barrel (condition for internal resonance).” Trans. JSME, 81(822), 14-00552–00514-00552 (in Japanese).
Tanigawa, H., Hirata, K., Isimoto, T., Funaki, J., and Yano, H. (1999). “On vertical sloshing in cylindrical containers with annular cross section.” Trans. JSME Ser. B, 65(636), 2755–2762.
Timokha, A. (2016). “Analytically approximate natural sloshing modes and frequencies for an upright circular container with poles.” J. Eng. Math., 101(1), 47–54.
Uğurlu, B. (2016). “Boundary element method based vibration analysis of elastic bottom plates of fluid storage tanks resting on Pasternak foundation.” Eng. Anal. Boundary Elem., 62, 163–176.
Zhang, C. (2015). “Analysis of liquid sloshing in LNG carrier with wedge-shaped tanks.” Ocean Eng., 105, 304–317.
Zhang, S., and Jin, J. M. (1996). Computation of special functions, Wiley, New York.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Jan 5, 2016
Accepted: Mar 21, 2017
Published online: Jul 6, 2017
Published in print: Sep 1, 2017
Discussion open until: Dec 6, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.