Active Vibration Control Design Method Based on Transfer Matrix Method for Multibody Systems
Publication: Journal of Engineering Mechanics
Volume 143, Issue 6
Abstract
The efficient vibration control of complex multibody systems is an important issue in engineering design and has drawn substantial attention in the field of multibody system dynamics and control engineering. In this paper, by combining the transfer matrix method for multibody systems and modal space control, an active vibration control design method is presented for the dynamic modeling and vibration control design of multibody systems. The state-space equations in terms of generalized coordinates in modal space can be obtained easily. Based on the independent modal space control method, a robust independent modal space controller is presented for active vibration control of general linear multibody systems. The proposed method has low memory requirements, high computational efficiency, and additional advantages for dynamic design and real-time control of general multibody systems. A numerical simulation example of vibration control of a multiple-launch rocket system is given, validating the method and the control performance.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The research was supported by the Research Fund for the Doctoral Program of Higher Education of China (20113219110025, 20133219110037), the Natural Science Foundation of China Government (11102089, 11472135), and the Program for New Century Excellent Talents in University (NCET-10-0075).
References
Ambrósio, Jorge A. C., and Gonçalves, João P. C. (2001). “Complex flexible multibody systems with application to vehicle dynamics.” Multibody Sys. Dyn., 6(2), 168–182.
Balas, M. J. (1978). “Active control of flexible systems.” J. Optim. Theory Appl., 25(3), 415–436.
Bernard, F. (1987). Control system design, McGraw-Hill, New York.
Choi, K. M., Cho, S. W., and Kim, D. O. (2005). “Active control of seismic response reduction using modal-fuzzy approach.” Int. J. Solids Struct., 42(16), 4779–4794.
Daley, S., Johnson, F. A., Pearson, J. B., and Dixon, R. (2004). “Active vibration control for marine applications.” Control Eng. Pract., 12(4), 465–474.
Fang, J. Q., Li, Q. S., and Jeary, A. P. (2003). “Modified independent modal space control of m.d.o.f systems.” J. Sound Vib., 261(3), 421–441.
Gu, Z. Q., Ma, K. G., and Chen, W. D. (1997). Active vibration control, National Defence Industry Press, Beijing (in Chinese).
Kim, H. J. (2012). “Experimental study of active vibration control for trailed two-wheeled device.” Int. J. Precis. Eng. Manuf., 13(3), 363–369.
Kim, S. M., and Oh, J. E. (2013). “A modal filter approach to non-collocated vibration control of structures.” J. Sound Vib., 332(9), 2207–2221.
Liu, W. (2005). “Vibration control of large scale flexible structures using magnetorheological dampers.” Ph.D. dissertation, Worcester Polytechnic Institute, Worcester, U.K.
Meirovitch, L. (1987). “Some problems associated with the control of distributed structures.” J. Optim. Theory Appl., 54(1), 1–21.
Meirovitch, L., and Silverberg, L. M. (1983). “Globally optimal control of self-adjoint distributed systems.” Optimal Control Appl. Methods, 4(4), 365–386.
Resta, F., and Ripamonti, F. (2010). “Independent modal control for nonlinear flexible structures: An experimental test rig.” J. Sound Vib., 329(8), 961–972.
Rong, B., Rui, X. T., Wang, G. P., and Yang, F. F. (2010). “Discrete time transfer matrix method for dynamics of multibody system with real-time control.” J. Sound Vib., 329(6), 627–643.
Rui, X. T., Wang, G. P., Lu, Y. Q., and Yun, L. F. (2008a). “Transfer matrix method for linear multibody system.” Multibody Sys. Dyn., 19(3), 179–207.
Rui, X. T., Yun, L. F., Lu, Y. Q., He, B., and Wang, G. P. (2008b). Transfer matrix method of multibody system and its applications, Science Press, Beijing (in Chinese).
Rui, X. T., Zhang, J. S., and Zhou, Q. B. (2014). “Automatic deduction theorem of overall transfer equation of multibody system.” Adv. Mech. Eng., 378047.
Shabana, A. A. (2005). Dynamics of multibody systems, Cambridge University Press, New York.
Shen, Y., Golnaraghi, M. F., and Heppler, G. R. (2006). “Semi-active vibration control schemes for suspension systems using magnetorheological dampers.” J. Vib. Control, 12(1), 3–24.
Wang, D. A., and Huang, Y. M. (2002). “Modal space vibration control of a beam by using the feed forward and feedback control loop.” Int. J. Mech. Sci., 44(1), 1–19.
Wang, D. A., and Huang, Y. M. (2003). “Application of discrete-time variable structure control in the vibration reduction of a flexible structure.” J. Sound Vib., 261(3), 483–501.
Wasfy, T. M., and Noor, A. K. (2003). “Computational strategies for flexible multibody system.” Appl. Mech. Rev., 56(6), 553–613.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Jul 10, 2015
Accepted: Nov 17, 2016
Published online: Feb 16, 2017
Published in print: Jun 1, 2017
Discussion open until: Jul 16, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.