Fundamental Principles of Drill-String Mechanics and Their Qualitative Simulation
Publication: Journal of Engineering Mechanics
Volume 143, Issue 7
Abstract
In general mechanics, systems must follow the mechanical equilibrium principle, the minimum potential energy principle, and the minimum dissipation power principle. This paper confirms that a rotating drill string in a wellbore follows these three principles. The study presents three main findings. (1) As the rotary speed of a rod string increases, its deflection decreases nearer to the borehole center. (2) There exists a whirl-state transition critical rotary speed. If the rotary speed is below this critical rotary speed, the dissipation power increases as the rotary speed increases. If the rotary speed is higher than this critical rotary speed, the dissipation power first decreases rapidly as the rotary speed increases and the deflection of the rod string abruptly decreases, and then the dissipation power increases as the rotary speed increases. (3) As the viscosity of the liquid increases, the whirl-state transition critical rotary speed decreases. As the axial load increases, the whirl-state transition critical rotary speed decreases.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The paper is supported by the National Natural Science Foundation of China (Grant Nos. 51244004, 51374183, and 51490653).
References
Chatjigeorgiou, I. K. (2013). “Numerical simulation of the chaotic lateral vibrations of long rotating beams.” Appl. Math. Comput., 219(10), 5592–5612.
Li, Z. (2008). Tubular mechanics in oil-gas wells and its applications, Petroleum Industry Press, Beijing, 1–165 (in Chinese).
Li, Z. (2011). “Research on the law of fracture initiation and propagation based on principle of minimum consume energy.” Northeast Petroleum Univ., Daqing, China (in Chinese).
Li, Z. (2013). “An inevitable way in drill-string whirl research: Combination of drilling fluid power lubrication with drill string dynamics.” Acta Petrolei Sinica, 34(3), 607–610 (in Chinese).
Li, Z., and Li, J. (2002). “Fundamental equations for dynamic analysis of rod and pipe string in oil-gas wells and application in static buckling analysis.” J. Can. Pet. Technol., 41(5), 44–53.
Li, Z., Ma, X., and Huang, W. (1995). “A general formulation of drill stem mechanics and its application.” Acta Mech. Sinaca, 27(4), 406–414 (in Chinese).
Liao, C. M., Balachandran, B., Karkoub, M., and Abdel-Magid, Y. L. (2011). “Drill-string dynamics: Reduced-order models and experimental studies.” ASME J. Vib. Acoust., 133(4), 041008.
Liao, C. M., Vlajic, N., Karki, H., and Balachandran, B. (2012). “Parametric studies on drill-string motions.” Int. J. Mech. Sci., 54(1), 260–268.
Liu, S., and Zhang, T. (2008). Basic theory of elasticity and plasticity, Huazhong Univ. of Science and Technology Press, Wuhan, China, 193–196 (in Chinese).
Liu, X., Vlajic, N., Long, X., Meng, G., and Balachandran, B. (2013). “Nonlinear motions of a flexible rotor with a drill bit: Stick-slip and delay effects.” Nonlinear Dyn., 72(1–2), 61–77.
Liu, X., Vlajic, N., Long, X., Meng, G., and Balachandran, B. (2014). “State-dependent delay influenced drill-string oscillations and stability analysis.” ASME J. Vib. Acoust., 136(5), 051008.
Luo, Y., Tang, S., Liu, C., and Zhou, Z. (2009). “Advances on the least energy consumption principle and its application.” J. Railway Sci. Eng., 6(2), 79–86 (in Chinese).
Nandakumar, K., and Wiercigroch, M. (2013). “Stability analysis of a state dependent delayed, coupled two DOF model of drill-string vibration.” J. Sound Vib., 332(10), 2575–2592.
Tang, S., Luo, Y., and Zhou, Z. (2005). “The least potential principle and the least remaining principle in linear elastodynamics.” J. Dyn. Control, 3(1), 34–38 (in Chinese).
Thompson, J. M. T., and van der Heijden, G. H. M. (2013). “A graphical criterion for the instability of elastic equilibria under multiple loads: With applications to drill-strings.” Int. J. Mech. Sci., 68, 160–170.
Vlajic, N., Fitzgerald, T., Nguyen, V., and Balachandran, B. (2014a). “Geometrically exact planar beams with initial pre-stress and large curvature: Static configurations, natural frequencies, and mode shapes.” Int. J. Solids Struct., 51(19), 3361–3371.
Vlajic, N., Liao, C. M., Karki, H., and Balachandran, B. (2014b). “Draft: Stick-slip motions of a rotor-stator system.” ASME J. Vib. Acoust., 136(2), 021005.
Wei, S. (2008). “Principle of minimum potential energy in theory of elasticity.” J. Qingyuan Polytech., 1(2), 116–117 (in Chinese).
Yang, G. (2008). “The theoretical foundation of harmonic society.” J. Syst. Sci., 16(1), 1–8 (in Chinese).
Zhou, Z., and Tang, S. (2007). Minimum power consumption rate and variational principles in engineering mechanics, Science Press, Beijing, 29–42 (in Chinese).
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Mar 8, 2016
Accepted: Nov 4, 2016
Published ahead of print: Feb 20, 2017
Published online: Feb 21, 2017
Published in print: Jul 1, 2017
Discussion open until: Jul 21, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.