Proof of Incompleteness of Critical State Theory in Granular Mechanics and Its Remedy
Publication: Journal of Engineering Mechanics
Volume 143, Issue 2
Abstract
According to classical critical state theory (CST) of granular mechanics, two conditions on the stress ratio and void ratio are satisfied when reaching and maintaining a critical state (CS). Therefore, CST dictates the necessity of these two conditions although their sufficiency has not been demonstrated, but only assumed. The present work challenges this assumption based on the results of a virtual two-dimensional (2D) discrete element method (DEM) experiment. The virtual sample is first brought to CS and then rotation of the principal axes (PA) of stress is imposed while keeping stress principal values fixed. The rotation induces a void ratio reduction and thus, abandonment of CS, despite the fact the two CST conditions are satisfied at the initiation of the rotation process, since the stress principal values remain fixed and the void ratio is at its critical state value for the given fixed pressure. The recently proposed anisotropic critical state theory (ACST) remedies this incompleteness of CST by enhancing its two conditions by a third, related to the critical state value of a fabric anisotropy variable, defined as the trace of the product of the fabric anisotropy tensor and the loading direction tensor. This third condition is violated by the stress PA rotation and can explain the aforementioned void ratio reduction. ACST can also explain various other response characteristics that cannot be addressed by classical CST with no fabric anisotropy consideration. In conclusion, the three conditions of ACST are shown to be both necessary and sufficient for reaching and maintaining CS.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The research leading to these results has received funding from the European Research Council under the European Union’s Seventh Framework Program FP7-ERC-IDEAS Advanced Grant Agreement no. 290963 (SOMEF), and partial support by the National Science Foundation (NSF) project CMMI-1162096. The anonymous reviewers are acknowledged for providing input that made this work better and more accurate.
References
Ai, J., Langston, P. A., and Yu, H. (2014). “Discrete element modeling of material non-coaxiality in simple shear flows.” Int. J. Numer. Anal. Methods Geomech., 38(6), 615–635.
Been, K., and Jefferies, M. G. (1985). “A state parameter for sands.” Géotechnique, 35(2), 99–112.
Calvetti, F. (2008). “Discrete modeling of granular materials and geotechnical problems.” Eur. J. Environ. Civ. Eng., 12(7–8), 951–965.
Cundall, P. A., and Strack, O. D. (1979). “A discrete numerical model for granular assemblies.” Géotechnique, 29(1), 47–65.
Dafalias, Y. F. (2016). “Must critical state theory be revisited to include fabric effects?” Acta Geotech., 11(3), 479–491.
Dafalias, Y. F., and Manzari, M. T. (2004). “A simple plasticity sand model accounting for fabric change effects.” J. Eng. Mech., 622–634.
Dafalias, Y. F., Papadimitriou, A. G., and Li, X. S. (2004). “Sand plasticity model accounting for inherent fabric anisotropy.” J. Eng. Mech., 1319–1333.
Dafalias, Y. F., and Taiebat, M. (2014). “Rotational hardening with and without anisotropic fabric at critical state.” Géotechnique, 64(6), 507–511.
Daouadji, A., and Hicher, P. Y. (2010). “An enhanced constitutive model for crushable granular materials.” Int. J. Numer. Anal. Methods Geomech., 34(6), 555–580.
Fu, P., and Dafalias, Y. F. (2011). “Fabric evolution within shear bands of granular materials and its relation to critical state theory.” Int. J. Numer. Anal. Methods Geomech., 35(18), 1918–1948.
Fu, P., and Dafalias, Y. F. (2015). “Relationship between void- and contact normal-based fabric tensors for 2D idealized granular materials.” Int. J. Solids Struct., 63(18), 68–81.
Gao, Z., Zhao, J., Li, X. S., and Dafalias, Y. F. (2014). “A critical state sand plasticity model accounting for fabric evolution.” Int. J. Numer. Anal. Methods Geomech., 38(4), 370–390.
Huang, X., Hanley, K. J., O’Sullivan, C., and Kwok, C. Y. (2014). “Exploring the influence of interparticle friction on critical state behaviour using DEM.” Int. J. Numer. Anal. Methods Geomech., 38(12), 1276–1297.
ITASCA Consulting Group. (2008). “Particle flow code in two dimensions. Users’ manual: Theory and background.” Minneapolis.
Li, X., and Li, X. S. (2009). “Micro-macro quantification of the internal structure of granular materials.” J. Eng. Mech., 641–656.
Li, X., and Yu, H. S. (2010). “Numerical investigation of granular material behaviour under rotational shear.” Géotechnique, 60(5), 381–394.
Li, X., Yu, H. S., and Li, X. S. (2013). “A virtual experiment technique on the elementary behaviour of granular materials with discrete element method.” Int. J. Numer. Anal. Methods Geomech., 37(1), 75–96.
Li, X. S., and Dafalias, Y. F. (2000). “Dilatancy for cohesionless soils.” Géotechnique, 50(4), 449–460.
Li, X. S., and Dafalias, Y. F. (2002). “Constitutive modeling of inherently anisotropic sand behavior.” J. Geotech. Geoenviron. Eng., 868–880.
Li, X. S., and Dafalias, Y. F. (2012). “Anisotropic critical state theory: Role of fabric.” J. Eng. Mech., 263–275.
Li, X. S., and Dafalias, Y. F. (2015). “Dissipation consistent fabric tensor definition from DEM to continuum for granular media.” J. Mech. Phys. Solids, 78, 141–153.
Liao, C. (1997). “Stress–strain relationship for granular materials based on the hypothesis of best fit.” Int. J. Solids Struct., 34(31), 4087–4100.
Manzari, M. T., and Dafalias, Y. F. (1997). “A critical state two-surface plasticity model for sands.” Géotechnique, 47(2), 255–272.
Papadimitriou, A. G., Dafalias, Y. F., and Li, X. S. (2015). “Sand model within anisotropic critical state theory with evolving fabric.” Geomechanics from Micro to Macro, Proc., TC105 Int. Symp. on Geomechanics from Micro to Macro, Taylor & Francis, London, 627–632.
PFC 2D version 4.0 [Computer software]. ITASCA Consulting Group, Minneapolis.
Roscoe, K. H., Schofield, A., and Wroth, C. P. (1958). “On the yielding of soils.” Géotechnique, 8(1), 22–53.
Satake, M. (1982). “Fabric tensor in granular materials.” Proc., IUTAM Symp. on Deformation and Failure of Granular Materials, P. A. Vermeer and H. J. Luger, eds., A.A. Balkema, Rotterdam, Netherlands, 63–68.
Schofield, A. N., and Wroth, C. P. (1968). Critical state soil mechanics, McGraw-Hill, London.
Szarf, K., Combe, G., and Villard, P. (2011). “Polygons vs. clumps of discs: A numerical study of the influence of grain shape on the mechanical behaviour of granular materials.” Powder Technol., 208(2), 279–288.
Tong, Z., Fu, P., Dafalias, Y. F., and Yao, Y. (2014). “Discrete element method analysis of non-coaxial flow under rotational shear.” Int. J. Numer. Anal. Methods Geomech., 38(14), 1519–1540.
Yimsiri, S., and Soga, K. (2011). “Effects of soil fabric on behaviors of granular soils: Microscopic modeling.” Comput. Geotech., 38(7), 861–874.
Yoshimine, M., Ishihara, K., and Vargas, W. (1998). “Effects of principal stress direction and intermediate principal stress on undrained shear behavior of sand.” Soils Found., 38(3), 179–188.
Information & Authors
Information
Published In
Copyright
©2016 American Society of Civil Engineers.
History
Received: Jan 28, 2016
Accepted: Aug 1, 2016
Published online: Oct 31, 2016
Published in print: Feb 1, 2017
Discussion open until: Mar 31, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.