Modeling Temperature-Dependent Behavior of Soft Clay
Publication: Journal of Engineering Mechanics
Volume 142, Issue 8
Abstract
In this study, an anisotropic thermal-elastic-plastic (TEP) constitutive model is developed for soft clays. Two yield surfaces, namely the current yield surface and reference yield surface, are adopted to characterize the development of plastic volumetric strain (i.e., the unique internal variable of the two surfaces) due to either mechanical or thermal loading. The model is formulated based on the framework of the Modified Cam-Clay model, with only two additional parameters introduced (i.e., and ), to account for stress-induced anisotropy and thermal-induced translation of compression curves, respectively. Based on the model, a simplified equation is proposed to quantify the effect of drained heating on the undrained shear strength of clay. The predictive capability of the proposed model and the simplified equation for undrained shear strength are verified against published results of temperature-controlled triaxial tests on soft clay. By assessing seven different types of clays, the thermal-related parameters are found to almost linearly increase with the plastic index () of soil. Empirical correlations are then proposed for a quick approximation of , in case that data from temperature-controlled tests are not readily available.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors gratefully acknowledge the financial supports of the National Science Foundation for Distinguished Young Scholars of China (Project No. 51325901), International Science & Technology Cooperation Program of China (2015DFE72830), and General Program of National Natural Science Foundation of China No.51279176.
References
Abuel-Naga, H. M., Bergado, D. T., Bouazza, A., and Pender, M. (2009). “Thermomechanical model for saturated clays.” Géotechnique, 59(3), 273–278.
Abuel-Naga, H. M., Bergado, D. T., Bouazza, A., and Ramana, G. V. (2007a). “Volume change behaviour of saturated clays under drained heating conditions: experimental results and constitutive modeling.” Can. Geotech. J., 44(8), 942–956.
Abuel-Naga, H. M., Bergado, D. T., and Lim, B. F. (2007b). “Effect of temperature on shear strength and yielding behaviour of soft Bangkok clay.” Soils Found., 47(3), 423–436.
Boudali, M., Leroueil, S., and Srinivasa Murthy, B. R. (1994). “Viscous behaviour of natural clays.” Proc., 13th Int. Conf. on Soil Mechanics and Foundation Engineering, A.A. Balkema, Rotterdam, Netherlands, 411–416.
Campanella, R. G., and Mitchell, J. K. (1968). “Influence of temperature variations on soil behaviour.” J. Soil Mech. Found. Div., 94(3), 709–734.
Cekerevac, C., and Laloui, L. (2004). “Experimental study of thermal effects on the mechanical behaviour of a clay.” Int. J. Numer. Anal. Meth. Geomech., 28(3), 209–228.
Crilly, T. (1996). “Unload-reload tests on saturated illite specimens at elevated temperature.” Ph.D. thesis, Univ. of Manitoba, Winnipeg, MB, Canada.
Cui, Y. J., Sultan, N., and Delage, P. (2000). “A thermomechanical model for saturated clays.” Can. Geotech. J., 37(3), 607–620.
Eriksson, L. G. (1989). “Temperature effects on consolidation properties of sulphide clays.” Proc., 12th Int. Conf. Soil Mechanics and Foundation Engineering, Balkema, Rotterdam, Netherlands, 2087–2090.
Graham, J., Noonan, M. L., and Lew, K. V. (1983). “Yield states and stress-strain relationships in a natural plastic clay.” Can. Geotech. J., 20(3), 502–516.
Graham, J., Tanaka, N., Crilly, T., and Alfaro, M. (2001). “Modified cam-clay modelling of temperature effects in clays.” Can. Geotech. J., 38(3), 608–621.
Hueckel, T., and Baldi, G. (1990). “Thermoplasticity of saturated clays: Experimental constitutive study.” J. Geotech. Eng., 1778–1796.
Hueckel, T., and Borsetto, M. (1990). “Thermoplasticity of saturated soils and shales: Constitutive equations.” J. Geotech. Eng., 1765–1777.
Jáky, J. (1944). “The coefficient of earth pressure at rest.” J. Soc. Hung. Eng. Archit., 1, 355–358 (in Hungarian).
Kurz, D. (2014). “Understanding the effects of temperature on the behaviour of clay.” Ph.D. thesis, Univ. of Manitoba, Winnipeg, MB, Canada.
Laloui, L., and Cekerevac, C. (2003). “Thermo-plasticity of clays: An isotropic yield mechanism.” Comput. Geotech., 30(8), 649–660.
Laloui, L., and François, B. (2009). “ACMEG-T: Soil thermoplasticity model.” J. Eng. Mech., 932–944.
Marques, M. E. S., Leroueil, S., and Soares de Almeida, M. D. S. (2004). “Viscous behaviour of St-Roch-de-l’Achigan clay, Quebec.” Can. Geotech. J., 41(1), 25–38.
Mašín, D. (2012). “Asymptotic behaviour of granular materials.” Granular Matter, 14(6), 759–774.
Mašín, D., and Khalili, N. (2012). “A thermo-mechanical model for variably saturated soils based on hypoplasticity.” Int. J. Numer. Anal. Meth. Geomech., 36(12), 1461–1485.
Moritz, L. (1995). “Geotechnical properties of clay at elevated temperatures.”, Swedish Geotechnical Institute, Linköping.
Muir Wood, D. (1990). “Soil behaviour and critical state soil mechanics.” Cambridge University Press, Cambridge, U.K.
Nadarajah, V. (1973). “Ground Stress-strain properties of lightly over-consolidated clays.” Ph.D. thesis, Univ. of Cambridge, Cambridge, U.K.
Sultan, N., Delage, P., and Cui, Y. J. (2002). “Temperature effects on the volume change behaviour of Boom clay.” Eng. Geol., 64(2–3), 135–145.
Tanaka, N. (1995). “Thermal elastic plastic behaviour and modelling of saturated clays.” Ph.D. thesis, Univ. of Manitoba, Winnipeg, MB, Canada.
Tidfors, M., and Sällfors, G. (1989). “Temperature effect on preconsolidation pressure.” Geotech. Test. J., 12(1), 93–97.
Towhata, I., Kuntiwattanakul, P., Seko, I., and Ohishi, K. (1993). “Volume change of clays induced by heating as observed in consolidation tests.” Soils Found., 33(4), 170–183.
Wang, L. Z., Dan, H. B., and Li, L. L. (2012). “Modeling strain-rate dependent behaviour of -consolidated soft clays.” J. Eng. Mech., 738–748.
Wang, L. Z., Shen, K. L., and Ye, S. H. (2008). “Undrained shear strength of consolidated soft soils.” Int. J. Geomech., 105–113 .
Wheeler, S. J., Näätänen, A., Karstunen, M., and Lojander, M. (2003). “An anisotropic elastoplastic model for soft clays.” Can. Geotech. J., 40(2), 403–418.
Yao, Y. P., and Zhou, A. N. (2013). “Non-isothermal unified hardening model: A thermo-elasto-plastic model for clays.” Géotechnique, 63(15), 1328–1345.
Zdravković, L., Potts, D. M., and Hight, D. W. (2002). “The effect of strength anisotropy on the behaviour of embankments on soft ground.” Géotechnique, 52(6), 447–457.
Information & Authors
Information
Published In
Journal of Engineering Mechanics
Volume 142 • Issue 8 • August 2016
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Jul 14, 2015
Accepted: Mar 1, 2016
Published online: Apr 19, 2016
Published in print: Aug 1, 2016
Discussion open until: Sep 19, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.