Model for Flexural Strength Calculation of Corroded RC Beams Considering Bond–Slip Behavior
Publication: Journal of Engineering Mechanics
Volume 142, Issue 7
Abstract
An analytical model is proposed in this paper to evaluate the residual flexural strength for corroded RC beams. The steel slipping caused by bond degradation is included in the proposed model. Various failure modes of beams caused by different types of steel bar anchorage are also incorporated in the model. The bond degradation is considered as a function of the corrosion rate of steel. Bond degradation transfers prematurely the effective bond force, resulting in incompatible strain within the slipping region. A new method is developed to quantify the slipping region based on the transfer theory of effective bond force. Next, a new strain-incompatibility analysis method is proposed to determine the deteriorated flexural strength. The accuracy of the model is validated by experimental observations on the beams with different steel anchorage under corrosive environments. Results show that the proposed model can provide a reasonable prediction for the flexural strength and failure modes. The strain incompatibility of the corroded beams is sensitive to corrosion loss and loading position. It becomes very significant for the beams with a corrosion loss greater than 7% and the beam with a concentrated load at the midspan.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The work reported here was conducted with financial support from the National Basic Research Program of China (973 Program, Grant No. 2015CB057705), the Special Fund of Excellent Doctoral Dissertations of China (Grant No. 201247), and Hunan Provincial Natural Science Foundation of China (Grant No. 14JJ1022). The support is gratefully acknowledged.
References
ACI (American Concrete Institute). (2008). “Building code requirements for structural concrete and commentary.” ACI Committee 318, Farmington Hills, MI, 43.
Almusallam, A. A., Al-Gahtani, A. S., Aziz, A. R., and Rasheeduzzafar (1996). “Effect of reinforcement corrosion on bond strength.” Constr. Build. Mater., 10(2), 123–129.
Auyeung, Y., Balaguru, P., and Chung, L. (2000). “Bond behavior of corroded reinforcement bars.” ACI Mater. J., 97(2), 214–220.
Azad, A. K., Ahmad, S., and Azher, S. A. (2007). “Residual strength of corrosion-damaged reinforced concrete beams.” ACI Mater. J., 104(1), 40–47.
Bhargava, K., Ghosh, A. K., Mori, Y., and Ramanujam, S. (2007). “Corrosion-induced bond strength degradation in reinforced concrete—Analytical and empirical models.” Nucl. Eng. Des., 237(11), 1140–1157.
Bhargava, K., Ghosh, A. K., Mori, Y., and Ramanujam, S. (2008). “Suggested empirical models for corrosion-induced bond degradation in reinforced concrete.” J. Struct. Eng., 221–230.
Cairns, J., and Abdullah, R. B. (1996). “Bond strength of black and epoxy-coated reinforcement-A theoretical approach.” ACI Mater. J., 93(4), 362–369.
Cairns, J., and Zhao, M. A. (1993). “Strength assessment of corrosion damaged reinforced slabs and beams.” Proc. Inst. Civ. Eng., Struct. Build., 99(2), 141–154.
Castel, A., Franfois, R., and Arliguie, G. (2000). “Mechanical behaviour of corroded reinforced concrete beams—Part 2: Bond and notch effects.” Mater. Struct., 33(9), 545–551.
CEB-FIP (Fédération International de la Précontrainte). (2010). “FIB model code for concrete structures.” Lausanne, Switzerland.
Choi, Y. S., Yi, S.-T., Kim, M. Y., Jung, W. Y., and Yang, E. I. (2014). “Effect of corrosion method of the reinforcing bar on bond characteristics in reinforced concrete specimens.” Constr. Build. Mater., 54, 180–189.
Collins, M., and Mitchell, D. (1991). Prestessed concrete structure, Prentice Hall, NJ.
Coronelli, D. (2002). “Corrosion cracking and bond strength modeling for corroded bars in reinforced concrete.” ACI Struct. J., 99(3), 267–276.
Coronelli, D., and Gambarova, P. (2004). “Structural assessment of corroded reinforced concrete beams: Modeling guidelines.” J. Struct. Eng., 1214–1224.
Dekoster, M., Buyle-Bodin, F., Maurel, O., and Delmas, Y. (2003). “Modelling of the flexural behaviour of RC beams subjected to localised and uniform corrosion.” Eng. Struct., 25(10), 1333–1341.
El-Tawil, S., Ogunc, C., Okeil, A., and Shahawy, M. (2001). “Static and fatigue analysis of RC beams strengthened with CFRP laminates.” J. Compos. Constr., 258–267.
Eyre, J. R., and Nokhasteh, Z. (1992). “Behavior of concrete beams with exposed reinforcement.” Proc. Inst. Civ. Eng. Struct. Build., 94(2), 197–203.
Fang, C., Lundgren, K., Chen, L., and Zhu, C. (2004). “Corrosion influence on bond in reinforced concrete.” Cem. Concr. Res., 34(11), 2159–2167.
Giuriani, E., Plizzari, G., and Schumm, C. (1991). “Role of stirrups and residual tensile strength of cracked concrete on bond.” J. Struct. Eng., 1–18.
Haskett, M., Oehlers, D. J., and Mohamed Ali, M. S. (2008). “Local and global bond characteristics of steel reinforcing bars.” Eng. Struct., 30(2), 376–383.
Kearsey, E. P., and Joyce, A. (2014). “Effect of corrosion products on bond strength and flexural behaviour of reinforced concrete slabs.” J. S. Afr. Inst. Civ. Eng., 56(2), 21–29.
Koch, G. H., Brongers, M. P. H., Thomson, N. G., Virmani, Y. P., and Payer, J. H. (2001). “Corrosion costs and preventive strategies in the United States.” Federal Highway Administration, Washington, DC.
Li, C. Q., Melchers, R. E., and Zheng, J. J. (2006). “Analytical model for corrosion-induced crack width in reinforced concrete structures.” ACI Struct. J., 103(4), 479–487.
Li, C. Q., Yang, S. T., and Saafi, M. (2014). “Numerical simulation of behavior of reinforced concrete structures considering corrosion effects on bonding.” J. Struct. Eng., 04014092.
Li, C. Q., and Zheng, J. J. (2005). “Propagation of reinforcement corrosion in concrete and its effect on structural deterioration.” Mag. Concr. Res., 57(5), 261–271.
Long, X., Tan, K. H., and Lee, C. K. (2014). “Bond stress-slip prediction under pullout and dowel action in reinforced concrete joints.” ACI Struct. J., 111(4), 977–987.
Lowes, L. N., and Altoontash, A. (2003). “Modeling reinforced-concrete beam-column joints subjected to cyclic loading.” J. Struct. Eng., 1686–1697.
Maaddawy, T. E., Soudki, K., and Topper, T. (2005). “Analytical model to predict nonlinear flexural behavior of corroded reinforced concrete beams.” ACI Struct. J., 102(4), 550–559.
Mangat, P. S., and Elgarf, M. S. (1999). “Flexural strength of concrete beams with corroding reinforcement.” ACI Struct. J., 96(1), 149–158.
Sezen, H., and Moehle, J. P. (2003). “Bond-slip behavior of reinforced concrete members.” fib-Symp.: Concrete Structures in Seismic Regions, CEB-FIP, Athens, Greece.
Torres-Acosta, A. A., Navarro-Gutierrez, S., and Terán-Guillén, J. (2007). “Residual flexure capacity of corroded reinforced concrete beams.” Eng. Struct., 29(6), 1145–1152.
Val, D., and Chernin, L. (2009). “Serviceability reliability of reinforced concrete beams with corroded reinforcement.” J. Struct. Eng., 896–905.
Wang, L., Ma, Y., Ding, W., Zhang, J., and Liu, Y. (2015). “Comparative study of flexural behavior of corroded beams with different types of steel bars.” J. Perform. Constr. Facil., 04014163.
Wang, X., and Liu, X. (2004a). “Bond strength modeling for corroded reinforcements in reinforced concrete.” Struct. Eng. Mech., 17(6), 863–878.
Wang, X., and Liu, X. (2004b). “Modeling bond strength of corroded reinforcement without stirrups.” Cem. Concr. Res., 34(8), 1331–1339.
Zhao, Y., Yu, J., Hu, B., and Jin, W. (2012). “Crack shape and rust distribution in corrosion-induced cracking concrete.” Corros. Sci., 55, 385–393.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Aug 24, 2015
Accepted: Dec 28, 2015
Published online: Mar 15, 2016
Published in print: Jul 1, 2016
Discussion open until: Aug 15, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.