Modeling Mechanical Behavior of Very Coarse Granular Materials
Publication: Journal of Engineering Mechanics
Volume 143, Issue 1
Abstract
A novel approach has been developed to predict the mechanical behavior of very coarse granular materials with a constitutive model, which considers both grain breakage and size effect. The behavior of granular assemblies is significantly influenced by particle breakage. A critical-state double-yield-surface model incorporating the change in the critical-state line and in elastic stiffness caused by grain breakage during loading has been adopted. The amount of grain breakage was estimated by extending the size effect theory on individual grains to granular assemblies. The results from earlier studies on granular materials with parallel gradations have been usefully exploited to calibrate and to validate the model. Comparisons between experiments and simulations suggest that this approach can predict the mechanical behavior of very coarse granular materials from test results performed on a finer fraction with a homothetic gradation.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was financially supported by the National Natural Science Foundation of China (Grant Nos. 41372285, 51579179).
References
Bazant, Z. P., and Planas, J. (1997). Fracture and size effect in concrete and other quasibrittle materials, CRC.
Biarez, J., and Hicher, P.-Y. (1994). Elementary mechanics of soil behaviour: Saturated remoulded soils, A.A. Balkema, Rotterdam, Netherlands.
Biarez, J., and Hicher, P.-Y. (1997). “Influence de la granulométrie et de son évolution par ruptures de grains sur le comportementmécanique de matériauxgranulaires.” Revue Francaise de Genie Civil, 1(4), 607–631.
Chávez, C., and Alonso, E. (2003). “A constitutive model for crushed granular aggregates which includes suction effects.” Soils Found., 43(4), 215–227.
Coop, M., Sorensen, K., Freitas, T. B., and Georgoutsos, G. (2004). “Particle breakage during shearing of a carbonate sand.” Geotechnique, 54(3), 157–163.
Daouadji, A., and Hicher, P. Y. (2010). “An enhanced constitutive model for crushable granular materials.” Int. J. Numer. Anal. Methods Geomech., 34(6), 555–580.
Daouadji, A., Hicher, P. Y., and Rahma, A. (2001). “Modelling grain breakage influence on mechanical behaviour of granular media.” Eur. J. Mech. A/Solids, 20(1), 113–137.
Einav, I. (2007). “Breakage mechanics—Part I: Theory.” J. Mech. Phys. Solids, 55(6), 1274–1297.
Frossard, E., Hu, W., Dano, C., and Hicher, P.-Y. (2012). “Rockfill shear strength evaluation: A rational method based on size effects.” Geotechnique, 62(5), 415–427.
Hardin, B. O. (1985). “Crushing of soil particles.” J. Geotech. Eng., 1177–1192.
Hu, W., Yin, Z., Dano, C., and Hicher, P.-Y. (2011). “A constitutive model for granular materials considering grain breakage.” Sci. China Technol. Sci., 54(8), 2188–2196.
Iwasaki, T., and Tatsuoka, F. (1977). “Effects of grain size and grading on dynamic shear moduli of sands.” Soils Found., 17(3), 19–35.
Jaeger, J. (1967). “Failure of rocks under tensile conditions.” Int. J. Rock Mech. Mining Sci. Geomech. Abstracts, 4(2), 219–227.
Jefferies, M., and Been, K. (2006). Soil liquefaction: A critical state approach, Taylor and Francis, London.
Kikumoto, M., Wood, D. M., and Russell, A. (2010). “Particle crushing and deformation behaviour.” Soils Found., 50(4), 547–563.
Lade, P. V., Yamamuro, J. A., and Bopp, P. A. (1996). “Significance of particle crushing in granular materials.” J. Geotech. Eng., 309–316.
Lee, K. L., and Farhoomand, I. (1967). “Compressibility and crushing of granular soil in anisotropic triaxial compression.” Can. Geotech. J., 4(1), 68–86.
Li, G., Liu, Y., Dano, C., and Hicher, P. (2014). “Grading-dependent behavior of granular materials: From discrete to continuous modeling.” J. Eng. Mech., 04014172.
Liu, Y.-J., et al. (2014). “Influence of grading on the undrained behavior of granular materials.” Comptes Rendus Mécanique, 342(2), 85–95.
Lobo-Guerrero, S., and Vallejo, L. E. (2006). “Discrete element method analysis of railtrack ballast degradation during cyclic loading.” Granular Matter, 8(3–4), 195–204.
Marachi, N., Chan, C., Seed, H., and Duncan, J. (1969). Strength and deformation characteristics of rockfill materials, Univ. of California, Berkeley, CA.
Marsal, R. J. (1967). “Large-scale testing of rockfill materials.” J. Soil Mech. Found. Div., 93(2), 27–43.
Marsal, R. J. (1973). Mechanical properties of rockfill: In embankment-dam engineering, R. C. Hirschfeld and S. J. Poulos, eds., Wiley, New York, 109–200.
McDowell, G., and Bolton, M. (1998). “On the micromechanics of crushable aggregates.” Geotechnique, 48(5), 667–679.
McDowell, G., Bolton, M., and Robertson, D. (1996). “The fractal crushing of granular materials.” J. Mech. Phys. Solids, 44(12), 2079–2101.
Nakata, A., Hyde, M., and Hyodo, H. (1999). “A probabilistic approach to sand particle crushing in the triaxial test.” Geotechnique, 49(5), 567–583.
Ovalle, C., Dano, C., and Hicher, P.-Y. (2013). “Experimental data highlighting the role of surface fracture energy in quasi-static confined comminution.” Int. J. Fract., 182(1), 123–130.
Ovalle, C., Frossard, E., Dano, C., Hu, W., Maiolino, S., and Hicher, P.-Y. (2014). “The effect of size on the strength of coarse rock aggregates and large rockfill samples through experimental data.” Acta Mechanica, 225(8), 2199–2216.
Richart, F. E., Hall, J. R., and Woods, R. D. (1970). “Vibrations of soils and foundations.” International series in theoretical and applied mechanics, Prentice-Hall, Englewood Cliffs, NJ.
Rothenburg, L., and Selvadurai, A. (1981). “A micromechanical definition of the Cauchy stress tensor for particulate media.” Mechanics of structured media, A. Selvadurai, ed., Elsevier, Amsterdam, Netherlands, 469–486.
Weibull, W. (1939). “A statistical theory of the strength of materials.” Proc., Royal Swedish Institute for Engineering Research, Generalstabens Litografiska Anstalts Förlag, 151.
Yin, Z. Y., Chang, C. S., and Hicher, P. Y. (2010). “Micromechanical modelling for effect of inherent anisotropy on cyclic behaviour of sand.” Int. J. Solids Struct., 47(14–15), 1933–1951.
Yin, Z. Y., Chang, C. S., Hicher, P. Y., and Karstunen, M. (2009). “Micromechanical analysis of kinematic hardening in natural clay.” Int. J. Plast., 25(8), 1413–1435.
Yin, Z. Y., Hattab, M., and Hicher, P. Y. (2011). “Multiscale modeling of a sensitive marine clay.” Int. J. Numer. Anal. Methods Geomech., 35(15), 1682–1702.
Yin, Z. Y., and Hicher, P. Y. (2008). “Identifying parameters controlling soil delayed behaviour from laboratory and in situ pressuremeter testing.” Int. J. Numer. Anal. Methods Geomech., 32(12), 1515–1535.
Yin, Z. Y., Xu, Q., and Chang, C. S. (2013a). “Modeling cyclic behavior of clay by micromechanical approach.” J. Eng. Mech., 1305–1309.
Yin, Z.-Y., Xu, Q., and Hicher, P.-Y. (2013b). “A simple critical-state-based double-yield-surface model for clay behavior under complex loading.” Acta Geotechnica, 8(5), 509–523.
Yin, Z.-Y., Zhao, J., and Hicher, P.-Y. (2014). “A micromechanics-based model for sand-silt mixtures.” Int. J. Solids Struct., 51(6), 1350–1363.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Apr 22, 2015
Accepted: Nov 20, 2015
Published online: Jan 19, 2016
Discussion open until: Jun 19, 2016
Published in print: Jan 1, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.