Higher-Order Self-Excited Drag Forces on Bridge Decks
Publication: Journal of Engineering Mechanics
Volume 142, Issue 3
Abstract
Nonlinear features concerning self-excited drag forces induced by the vertical and torsional motions for typical deck sections are investigated comprehensively in this study. The self-excited drag forces are calculated using computational fluid dynamics (CFD)-based numerical simulations. In a conventional analysis framework, the self-excited drag force is modeled as a linear function of the structural motions. However, the simulation results from CFD indicate that in many instances, the second-order (nonlinear) component of the self-excited drag force is more significant than the first-order (linear) component. To enhance the modeling fidelity of a conventional aeroelastic analysis framework on the basis of the semiempirical flutter derivative concept, a nonlinear mathematical model for characterizing both the first- and second-order components is developed to better quantify the self-excited forces and more accurately extract the flutter derivatives. Its efficacy and superiority compared with the traditional linear model is verified using different deck sections. For asymmetric bluff sections, the first-order self-excited drag force components are more significant than the higher-order ones. However, for streamlined plate-like sections and symmetric deck sections, i.e., streamlined and bluff, the second-order self-excited drag force components are predominant. For such cases, the proposed nonlinear model is more appropriate. The proposed nonlinear mathematical model can help to serve as a building block for developing an overall nonlinear analysis framework for accurately simulating nonlinear aerodynamics and the aeroelasticity of long-span bridges.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The research is jointly supported by the National Science Foundation of China (51178086 and 51478087) and an opening project from the Key Laboratory of Wind Resistant for Transportation and Bridge by Ministry of China (KLWRTBMC13-01), which are gratefully acknowledged.
References
Chen, Z. Q., Yu, X. D., Yang, M. G., and Spencer, B., Jr. (2005). “Wind-induced self-excited loads on bridges.” J. Struct. Eng., 1783–1793.
Chowdhury, A. G., and Sarkar, P. P. (2003). “A new technique for identification of eighteen flutter derivatives using a three-degree-of-freedom section model.” Eng. Struct., 25(14), 1763–1772.
Diana, G., Rocchi, D., Argentini, T., and Muggiasca, S. (2010). “Aerodynamic instability of a bridge deck section model: Linear and nonlinear approach to force modeling.” J. Wind Eng. Ind. Aerodyn. 98(6–7), 363–374.
Faltinsen, O. M. (1990). Sea loads on ships and offshore structures, Cambridge University Press, Cambridge, U.K.
FLUENT 6.3 [Computer software]. Fluent Inc., New Hampshire.
Fransos, D., and Bruno, L. (2006). “Determination of the aeroelastic transfer functions for streamlined bodies by means of a Navier-Stokes solver.” Math. Comput. Modell., 43(5), 506–529.
Jones, N. P., Raggett, J. D., and Ozkan, E. (2003). “Prediction of cable-supported bridge response to wind: Coupled flutter assessment during retrofit.” J. Wind Eng. Ind. Aerodyn., 91(12–15), 1445–1464.
Katsuchi, H., Jones, N., Scanlan, R., and Akiyama, H. (1998). “Multi-mode flutter and buffeting analysis of the Akashi-Kaikyo bridge.” J. Wind Eng. Ind. Aerodyn., 77, 431–441.
Menter, F. R. (1994). “Two-equation eddy-viscosity turbulence models for engineering applications.” AIAA J., 32(8), 1598–1605.
Mishra, S. S., Kumar, K., and Krishna, P. (2006). “Identification of 18 flutter derivatives by covariance driven stochastic subspace method.” Wind Struct. Int. J., 9(2), 159–178.
Miyata, T. (1995). “Full model testing of large cable-supported bridges.” Proc., 9th ICWE, State-of-the-Art Volume, Wiley, New Delhi, India, 249–280.
Scanlan, R. H. (1997). “Amplitude and turbulence effects on bridge flutter derivatives.” J. Struct. Eng., 232–236.
Scanlan, R. H., and Tomo, J. (1971). “Air foil and bridge deck flutter derivatives.” J. Eng. Mech., 97(6), 1717–1737.
Schneider, G. E., and Raw, M. J. (1987). “Control volume finite-element method for heat transfer and fluid flow using colocated variables—1. Computational procedure.” Numer. Heat Transfer, 11(4), 363–390.
Singh, L., Jones, N., Scanlan, R., and Lorendeaux, O. (1996). “Identification of lateral flutter derivatives of bridge decks.” J. Wind Eng. Ind. Aerodyn., 60, 81–89.
Wu, T., and Kareem, A. (2013). “Aerodynamics and aeroelasticity of cable-supported bridges: Identification of nonlinear features.” J. Eng. Mech., 1886–1893.
Wu, T., and Kareem, A. (2015). “A nonlinear analysis framework for bluff-body aerodynamics: A Volterra representation of the solution of Navier-Stokes equations.” J. Fluids Struct., 54(4), 479–502.
Xu, F. Y., Chen, X. Z., Cai, C. S., and Chen, A. R. (2012). “Determination of 18 flutter derivatives of bridge decks by an improved stochastic search algorithm.” J. Bridge Eng., 576–588.
Xu, F. Y., Ying, X. Y., and Zhang, Z. (2014). “Three-degree-of-freedom coupled numerical technique for extracting 18 aerodynamic derivatives of bridge decks.” J. Struct. Eng., 04014085.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Feb 5, 2015
Accepted: Sep 29, 2015
Published online: Dec 14, 2015
Published in print: Mar 1, 2016
Discussion open until: May 14, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.