Plastic Analysis, Stability, and Natural Frequency of Two-Dimensional Frames of Variable Section Beams
Publication: Journal of Engineering Mechanics
Volume 142, Issue 3
Abstract
This paper focuses on calculating the load level and the ultimate state of steel plane frames consisting of straight slender nonprismatic rods. The plastic behavior is modeled in the theory of second order with a step-by-step method that only considers the bending moment effect and leads to the formulation of sudden concentrated plastic hinge. The plastic process results in the loss of stiffness, leading to lower strength of the section of the structure as a whole. Therefore, it also affects the stability of the whole, which is checked during the loading process each time a new plastic hinge is formed by the equations of stability. Thus, it is well known that it is necessary to suggest the static equilibrium in the deformed or actual configuration. The plastic design allows saving materials as well as ensuring the safety, functionality, and durability of the structure. In addition to the static analysis, the ability to evaluate the frequencies and the associated vibration modes is included. All this enables a tracking process of the structure response for each load state until the collapse.
Get full access to this article
View all available purchase options and get full access to this article.
References
Armero, F., and Ehrlich, D. (2005). “Finite element methods for the analysis of softening plastic hinges in beams and frames.” Comput. Mech., 35(4), 237–264.
Atanackovic, T. (2007). “Optimal shape of an elastic rod in flexural-torsional buckling.” Z. Angew. Math. Mech., 87(6), 399–405.
Balachandran, B., and Magrab, E. (2008). Vibrations, Thomson, Toronto, Canada.
Cacho-Pérez, M. (2010). “Técnicas numéricas de análisis límite de pórticos planos, incluyendo inestabilidad y comportamiento vibratorio.” Ph.D. thesis, Univ. of Valladolid, Valladolid, Spain.
Cacho-Pérez, M., and Lorenzana, A. (2010). “Straight method for critical buckling load of frames. Part II.” Rev. Int. Mét. Num. Cálc. Dise. Ing., 26(1), 31–38.
Chakrabarty, J. (2006). Theory of plasticity, 3rd Ed., Elsevier, Oxford, U.K.
Cleve, B. (2004). Numerical computing with MATLAB, Society for Industrial and Applied Mathematics, Philadelphia.
Dukkipati, R., and Srinivas, J. (2007). Vibrations: Problem solving companion, Alpha Science International, Richmond, TX.
Gilat, A. (2005). MATLAB: An introduction with applications, Wiley, New York.
Inman, D. (2009). Engineering vibration, 3rd Ed., Pearson Prentice-Hall, Upper Saddle River, NJ.
Kim, S., Kim, M., and Chen, W. (2000). “Improved refined plastic hinge analysis accounting for strain reversal.” Eng. Struct., 22(1), 15–25.
Krenk, S., Vissing-Jörgensenm, C., and Thesbbjerg, L. (1999). “Efficient collapse analysis for framed structures.” Comput. Struct., 72(4-5), 481–496.
Lorenzana, A., and Cacho-Pérez, M. (2009). “Straight method for critical buckling load of frames. Part I.” Rev. Int. Mét. Num. Cálc. Dise. Ing., 25(3), 247–258.
Lubliner, J. (1990). Plasticity theory, Maxwell Macmillan International Editions, New York.
Maier, G., and Cocchetti, G. (2003). “Elastic-plastic and limit-state analyses of frames with softening plastic-hinge models by mathematical programming.” Int. J. Solids Struct., 40(25), 7219–7244.
Meirovitch, L. (1986). Elements of vibration analysis, 2nd Ed., MacGraw-Hill, New York.
Neal, B. (1977). The plastic methods of structural analysis, 2nd Ed., Science Paperbacks, London.
Ortega, M., Romero, J., and Rosa, E. (1997). “A historical study of the problem of straight prismatic elements subjected to compression.” Informes de la Construcción, 59(507), 69–81.
Richard-Liew, J., Chen, H., Shanmugam, N., and Chen, W. (2000). “Improved nonlinear hinge analysis of space frame structures.” Eng. Struct., 22(10), 1324–1338.
Richard-Liew, J., White, D., and Chen, W. (1993). “Limit states design of semi-rigid frames using advanced analysis. Part 2: Analysis and design.” J. Const. Steel Res., 26(1), 29–57.
Saka, M., and Hayalioglu, M. (1991). “Optimum design of geometrically nonlinear elastic-plastic steel frames.” Comput. Struct., 38(3), 329–344.
Simitses, G., and Hodges, D. (2006). Fundamentals of structural stability, Elsevier, Oxford, U.K.
Timoshenko, S., and Goodier, J. (1970). Theory of elasticity, McGraw-Hill, New York.
Tin-Loi, F., and Tangaramvong, S. (2009). “Limit analysis of elastoplastic frames considering 2nd-order geometricnonlinearity and displacement constraints.” Int. J. Mech. Sci., 51(3), 179–191.
Wong, M. (2001). “Plastic frame analysis under fire conditions.” J. Struct. Eng., 127–133.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Jan 28, 2015
Accepted: Jul 20, 2015
Published online: Oct 20, 2015
Published in print: Mar 1, 2016
Discussion open until: Mar 20, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.