System Identification through Nonstationary Response: Wavelet and Transformed Singular Value Decomposition—Based Approach
Publication: Journal of Engineering Mechanics
Volume 141, Issue 7
Abstract
The full-scale data measured from tall buildings and long-span bridges are usually nonstationary due to transient earthquake ground motion, sudden changes in wind speed and/or direction, or time-varying motion of vehicles. The dynamic properties (i.e., frequency, damping, etc.) of these structures during nonstationary events closely relate to their operational safety, so their accurate identification is critical. Traditional system identification methods may fail to provide reliable results (especially for damping estimation) in these situations due to a lack of long segments of stationary data. In addition, these methods are not able to track the time-varying system properties caused by large amplitude response due to strong earthquakes or winds. This highlights the necessity of developing system identification methods suitable for nonstationary/transient data. In response to this need, this paper proposes a new nonstationary system identification scheme which first utilizes the wavelet transform (WT) to uncover the time-varying features of nonstationary data. Then the transformed singular value decomposition (TSVD) is introduced in tandem to automate the identification of analysis regions in the time-frequency domain. Subsequently, Laplace wavelet filtering is adopted to extract impulse-type signals from the WT coefficients in the identified analysis regions, thus enabling a reliable damping estimation from transient nonstationary data. Finally, the frequency and damping ratio are reliably identified from the extracted impulse-type signals by the wavelet modulus decay (WMD) or from the parameters of the Laplace wavelet, whereas mode shapes can be easily identified using SVD. Thanks to the automatic identification of the analysis regions by the TSVD, the proposed scheme can be readily used to conduct online nonstationary system identification from a set of streaming signals, which can be extremely advantageous for a quick structural condition assessment under extreme events. The efficacy of the proposed scheme is first evaluated using simulated nonstationary data with and without noise and compared with the existing approaches in the literature. Then, its ability in handling closely spaced modes is compared with the second order blind identification (SOBI) method. Finally, the performance of the proposed scheme for full-scale nonstationary data is investigated and compared with other methods in the literature.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The Global Center of Excellence at Tokyo Polytechnic University, funded by MEXT, and 111 Project Grant No. B13002 at Beijing Jiaotong University are acknowledged for their support in the preparation of this manuscript. The authors are thankful to Dr. Rachel Bashor, Dr. Audrey Bentz, Dr. Dae-Kun Kwon, and Dr. Tracy Kijewski-Correa for sharing data and providing useful advice. Also, the authors are grateful to Dr. Y.F. Huang in the Department of Electrical Engineering, University of Notre Dame, for his discussions. In addition, the authors would like to thank Dr. Enrica Bernardini and Ms. Sarah Bobby for their advice in the revision of the manuscript.
References
Bashor, R., Bobby, S., Kijewski-Correa, T., and Kareem, A. (2012). “Full-scale performance evaluation of tall buildings under wind.” J. Wind Eng. Ind. Aerodyn., 104(SI), 88–97.
Bashor, R., and Kareem, A. (2007). “Efficacy of time-frequency domain system identification scheme using transformed singular value decomposition.” Proc., 12th Int. Conf. on Wind Engineering, AWES, Cairns, Australia, 543–550.
Bashor, R. E. (2011). “Dynamics of wind sensitive structures.” Ph.D. dissertation, Univ. of Notre Dame, Notre Dame, IN.
Bentz, A. C. (2012). “Dynamics of tall buildings: Full-scale quantification and impacts on occupant comfort.” Ph.D. dissertation, Univ. of Notre Dame, Notre Dame, IN.
Brenner, M. J. (2003). “Non-stationary dynamics data analysis with wavelet-SVD filtering.” Mech. Syst. Signal Process., 17(4), 765–786.
Chiang, D.-Y., and Lin, C.-S. (2008). “Identification of modal parameters from nonstationary ambient vibration data using correlation technique.” AIAA J., 46(11), 2752–2759.
Chiang, D.-Y., and Lin, C.-S. (2011). “Identification of modal parameters from nonstationary ambient vibration data using the channel-expansion technique.” J. Mech. Sci. Technol., 25(5), 1307–1315.
Cohen, L. (2003). “The wavelet transform and time-frequency analysis.” Wavelets and signal processing, L. Debnath, ed., Birkhäuser, Boston, 3–22.
Feng, M. Q., Fukuda, Y., Chen, Y., Soyoz, S., and Lee, S. (2006). “Long-term structural performance monitoring of bridges.” Phase II: Development of baseline model and methodology for health monitoring and damage assessment, California Dept. of Transportation, Univ. of California, Irvine.
Freudinger, L. C., Lind, R., and Brenner, M. J. (1998). “Correlation filtering of modal dynamics using the Laplace wavelet.” Proc., 16th Int. Modal Analysis Conf., IMAC, Santa Barbara, CA, 868–877.
Groutage, D., and Bennink, D. (2000a). “Feature sets for nonstationary signals derived from moments of the singular value decomposition of Cohen-Posch (positive time-frequency) distributions.” IEEE Trans. Signal Process., 48(5), 1498–1503.
Groutage, D., and Bennink, D. (2000b). “A new matrix decomposition based on transforming the basis sets of the singular value decomposition yields principal features for time-frequency distributions.” Proc., SPIE, Advanced Signal Processing Algorithms, Architectures, and Implementations X, San Diego, CA, 66–79.
Guo, Y., and Kareem, A. (2013). “Nonstationary system identification based on a wavelet and transformed singular value decomposition based approach.”, NatHaz Laboratory, Univ. of Notre Dame, Notre Dame, IN.
Guo, Y. L., Kareem, A., Ni, Y. Q., and Liao, W. Y. (2012). “Performance evaluation of Canton Tower under winds based on full-scale data.” J. Wind Eng. Ind. Aerodyn., 104–106(SI), 116–128.
Hazra, B., and Narasimhan, S. (2010). “Wavelet-based blind identification of the UCLA factor building using ambient and earthquake responses.” Smart Mater. Struct., 19(2), 1–10.
Hazra, B., Roffel, A. J., Narasimhan, S., and Pandey, M. D. (2010). “Modified cross-correlation method for the blind identification of structures.” J. Eng. Mech., 889–897.
Hazra, B., Sadhu, A., Roffel, A. J., and Narasimhan, S. (2012). “Hybrid time-frequency blind source separation towards ambient system identification of structures.” Comput.-Aided Civ. Infrastruct. Eng., 27(5), 314–332.
Huang, M. J. (2006). “Utilization of strong-motion records for post-earthquake damage assessment of buildings.” Proc., Int. Workshop on Structural Health Monitoring and Damage Assessment, ROC, Taichung, Taiwan, IV1–IV29.
Kareem, A. (2003). “A tribute to Jack E. Cermak–wind effects on structures: A reflection on the past and outlook for the future.” Proc., 11th Int. Conf. on Wind Engineering, IAWE, Lubbock, TX.
Kerschen, G., Poncelet, F., and Golinval, J. C. (2007). “Physical interpretation of independent component analysis in structural dynamics.” Mech. Syst. Signal Process., 21(4), 1561–1575.
Kijewski-Correa, T., and Bentz, A. (2011). “Wind-induced vibrations of buildings: Role of transient events.” Struct. Build., 164(4), 273–284.
Kijewski-Correa, T., and Kareem, A. (2003). “The Chicago monitoring project: A fusion of information technologies and advanced sensing for civil infrastructure.” Structural health monitoring and intelligent infrastructure, Z. S. Wu and M. Abe, eds., Balkema, Lisse, Netherlands, 1003–1010.
Kijewski-Correa, T., et al. (2006). “Validating wind-induced response of tall buildings: Synopsis of the Chicago full-scale monitoring program.” J. Struct. Eng., 1509–1523.
Kijewski, T., Brown, D., and Kareem, A. (2003). “Identification of dynamic properties of a tall building from full-scale response measurements.” Proc., 11th Int. Conf. on Wind Engineering, IAWE, Lubbock, TX.
Kijewski, T., and Kareem, A. (2003). “Wavelet transforms for system identification in civil engineering.” Comput.-Aided Civ. Infrastruct. Eng., 18(5), 339–355.
Lardies, J., and Gouttebroze, S. (2002). “Identification of modal parameters using the wavelet transform.” Int. J. Mech. Sci., 44(11), 2263–2283.
Le, T. P., and Argoul, P. (2004). “Continuous wavelet transform for modal identification using free decay response.” J. Sound Vib., 277(1–2), 73–100.
Le, T. P., and Paultre, P. (2012). “Modal identification based on continuous wavelet transform and ambient excitation tests.” J. Sound Vib., 331(9), 2023–2037.
Li, Z., and Chang, C. C. (2012). “Tracking of structural dynamic characteristics using recursive stochastic subspace identification and instrumental variable technique.” J. Eng. Mech., 591–600.
Lin, C. C., Wang, C. E., and Wang, J. F. (2003). “On-line building damage assessment based on earthquake records.” Structural health monitoring and intelligent infrastructure, Z. S. Wu and M. Abe, eds., Balkema, Lisse, Netherlands, 551–559.
Matsumori, T., and Otani, S. (1998). “Correlation of damage and analysis of R/C building: Experience from the 1995 Kobe earthquake.” Struct. Eng. Mech., 6(8), 841–856.
McNeill, S. I., and Zimmerman, D. C. (2008). “A framework for blind modal identification using joint approximate diagonalization.” Mech. Syst. Signal Process., 22(7), 1526–1548.
McNeill, S. I., and Zimmerman, D. C. (2010). “Relating independent components to free-vibration modal responses.” Shock Vib., 17(2), 161–170.
Min, Z. H., and Sun, L. M. (2013). “Wavelet-based structural modal parameter identification.” Struct. Control Health Monit., 20(2), 121–138.
Moehle, J. P., and Eberhard, M. O. (2000). “Earthquake damage to bridges.” Bridge engineering handbook, W.-F. Chen and L. Duan, eds., CRC Press, Boca Raton.
Ni, Y. Q., Wong, K. Y., and Xia, Y. (2011). “Health checks through landmark bridges to sky-high structures.” Adv. Struct. Eng., 14(1), 103–119.
Pirnia, J. D. (2009). “Full-scale dynamic characteristics of tall buildings and impacts on occupant comfort.” M.S. thesis, Univ. of Notre Dame, Notre Dame, IN.
Poncelet, F., Kerschen, G., Golinval, J. C., and Verhelst, D. (2007). “Output-only modal analysis using blind source separation techniques.” Mech. Syst. Signal Process., 21(6), 2335–2358.
Ruzzene, M., Fasana, A., Garibaldi, L., and Piombo, B. (1997). “Natural frequencies and dampings identification using wavelet transform: Application to real data.” Mech. Syst. Signal Process., 11(2), 207–218.
Staszewski, W. J. (1997). “Identification of damping in MDOF systems using time-scale decompostion.” J. Sound Vib., 203(2), 283–305.
Tamura, Y., and Suganuma, S.-Y. (1996). “Evaluation of amplitude-dependent damping and natural frequency of buildings during strong winds.” J. Wind Eng. Ind. Aerodyn., 59(2-3), 115–130.
Twisdale, L. A., and Vickery, P. J. (1992). “Research on thunderstorm wind design parameters.” J. Wind Eng. Ind. Aerodyn., 41(1–3), 545–556.
Xu, Y. L., and Xia, Y. (2012). Structural health monitoring of long span suspension bridges, Spon Press, London.
Yan, B. F., Miyamoto, A., and Bruhwiler, E. (2006). “Wavelet transform-based modal parameter identification considering uncertainty.” J. Sound Vib., 291(1–2), 285–301.
Yang, Y., and Nagarajaiah, S. (2013). “Time-frequency blind source separation using independent component analysis for output-only modal identification of highly-damped structures.” J. Struct. Eng., 1780–1793.
Zhi, L. H., Li, Q. S., Wu, J. R., and Li, Z. N. (2011). “Field monitoring of wind effects on a super-tall building during typhoons.” Wind Struct., 14(3), 253–283.
Zhou, W., and Chelidze, D. (2007). “Blind source separation based vibration mode identification.” Mech. Syst. Signal Process., 21(8), 3072–3087.
Information & Authors
Information
Published In
Journal of Engineering Mechanics
Volume 141 • Issue 7 • July 2015
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Dec 13, 2013
Accepted: Nov 17, 2014
Published online: Apr 22, 2015
Published in print: Jul 1, 2015
Discussion open until: Sep 22, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.