Computation of Coefficients of Crack-Tip Asymptotic Fields Using the Weak Form Quadrature Element Method
Publication: Journal of Engineering Mechanics
Volume 141, Issue 8
Abstract
Coefficients of crack-tip asymptotic fields are computed using a recently developed weak form quadrature element method (QEM), combined with the subregion generalized variational principle. The variational description of a crack is established by dividing the domain into two regions, the potential energy region and the complementary energy region. Then the weak form QEM is employed to derive a system of algebraic equations. The coefficients are extracted directly from solving the equations. The accuracy, efficiency, and parameter sensitivity of the proposed method are discussed by solving a number of benchmark examples. The computed results are in very good agreement with available analytical or numerical results. The involved parameters can be adjusted according to convergence requirements. Thus, the method enjoys the advantages of straightforwardness and self-adaptivity.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The work described in this paper was supported by the National Natural Science Foundation of China (Grant Nos. 11402040, 11272362), the Fundamental Research Funds for the Central Universities of China (Grant No. CDJZR14205550), the Chongqing Science and Technology Commission Fund (Grant No. cstc2013jcyjjq50003), the Ministry of Education Fund (Grant No. 313059), and the Specialized Research Fund for the Doctoral Program of Higher Education (Grant No. 20120191120049).
References
Ayatollahi, M. R., and Nejati, M. (2010). “An over-deterministic method for calculation of coefficients of crack tip asymptotic field from finite element analysis.” Fatigue Fract. Eng. Mater. Struct., 34(3), 159–176.
Ayatollahi, M. R., and Nejati, M. (2011). “Determination of NSIFs and coefficients of higher order terms for sharp notches using finite element method.” Int. J. Mech. Sci., 53(3), 164–177.
Bellman, R., and Casti, J. (1971). “Differential quadrature and long-term integration.” J. Math. Anal. Appl., 34(2), 235–238.
Berto, F., and Lazzarin, P. (2014). “Recent developments in brittle and quasi-brittle failure assessment of engineering materials by means of local approaches.” Mater. Sci. Eng. R. Rep., 75(1), 1–48.
Chidgzey, S. R., and Deeks, A. J. (2005). “Determination of coefficients of crack tip asymptotic fields using the scaled boundary finite element method.” Eng. Fract. Mech., 72(13), 2019–2036.
Davis, P. J., and Rabinowitz, P. (2007). Methods of numerical integration, Dover, New York.
Fett, T. (1998). “T-stresses in rectangular plates and circular disks.” Eng. Fract. Mech., 60(5–6), 631–652.
Gardeazabal, D., He, Z., and Kotousov, A. (2014). “On influence of non-singular stress states on brittle fracture.” Int. J. Fract., 185(1–2), 201–208.
He, Y. Q., Yang, H. T., and Deeks, A. J. (2012). “Determination of coefficients of crack tip asymptotic fields by an element-free galerkin scaled boundary method.” Fatigue Fract. Eng. Mater. Struct., 35(8), 767–785.
Hello, G., Tahar, M. B., and Roelandt, J. M. (2012). “Analytical determination of coefficients in crack-tip stress expansions for a finite crack in an infinite plane medium.” Int. J. Solids Struct., 49(3–4), 556–566.
Kardomateas, G. A., Carlson, R. L., Soediono, A. H., and Schrage, D. P. (1993). “Near tip stress and strain fields for short elastic cracks.” Int. J. Fract., 62(3), 219–232.
Karihaloo, B. L., and Xiao, Q. Z. (2001a). “Accurate determination of the coefficients of elastic crack tip asymptotic field by a hybrid crack element with p-adaptivity.” Eng. Fract. Mech., 68(15), 1609–1630.
Karihaloo, B. L., and Xiao, Q. Z. (2001b). “Higher order terms of the crack tip asymptotic field for a notched three-point bend beam.” Int. J. Fract., 112(2), 111–128.
Larsson, S. G., and Carlsson, A. J. (1973). “Influence of non-singular stress terms and specimen geometry on small-scale yielding at crack tips in elastic-plastic materials.” J. Mech. Phys. Solids, 21(4), 263–277.
Long, Y., and Zhao, Y. (1985). “Calculation of stress intensity factors in plane problems by the sub-region mixed finite element method.” Adv. Eng. Software, 7(1), 32–35.
Murakami, Y. (1987). Stress intensity factors handbook, Pergamon Press, New York.
Rice, J. R. (1974). “Limitations to small-scale yielding approximation for crack tip plasticity.” J. Mech. Phys. Solids, 22(1), 17–26.
Sih, G. C., and Liebowitz, H. (1968). “Mathematical theories of brittle fracture.” Fracture: An Advanced Treatise, H. Liebowitz, ed., Academic Press, New York, 67–190.
Song, C. M. (2005). “Evaluation of power-logarithmic singularities, T-stresses and higher order terms of in-plane singular stress fields at cracks and multi-material corners.” Eng. Fract. Mech., 72(10), 1498–1530.
Su, R. K. L., and Feng, W. J. (2005). “Accurate determination of mode I and II leading coefficients of the Williams expansion by finite element analysis.” Finite Elem. Anal. Des., 41(11–12), 1175–1186.
Su, R. K. L., and Fok, S. L. (2007). “Determination of coefficients of the crack tip asymptotic field by fractal hybrid finite elements.” Eng. Fract. Mech., 74(10), 1649–1664.
Tsang, D. K. L., and Oyadiji, S. O. (2008). “Super singular element method for two-dimensional crack analysis.” Proc. R. Soc. London, Ser. A, 464(2098), 2629–2648.
Williams, M. L. (1952). “Stress singularities resulting from various boundary conditions in angular corners of plates in extension.” J. Appl. Mech., 19(4), 526–528.
Xiao, N., and Zhong, H. (2012). “Non-linear quadrature element analysis of planar frames based on geometrically exact beam theory.” Int. J. Non Linear Mech., 47(5), 481–488.
Xiao, Q. Z., and Karihaloo, B. L. (2003). “Direct evaluation of accurate coefficients of the linear elastic crack tip asymptotic field.” Fatigue Fract. Eng. Mater. Struct., 26(8), 719–729.
Xiao, Q. Z., and Karihaloo, B. L. (2007). “Implementation of hybrid crack element on a general finite element mesh and in combination with XFEM.” Comput. Meth. Appl. Mech. Eng., 196(13–16), 1864–1873.
Xiao, Q. Z., Karihaloo, B. L., and Liu, X. Y. (2004). “Direct determination of SIF and higher order terms of mixed mode cracks by a hybrid crack element.” Int. J. Fract., 125(3–4), 207–225.
Zhong, H., and Yu, T. (2007). “Flexural vibration analysis of an eccentric annular Mindlin plate.” Arch. Appl. Mech., 77(4), 185–195.
Zhong, H., and Yu, T. (2009). “A weak form quadrature element method for plane elasticity problems.” Appl. Math. Modell., 33(10), 3801–3814.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Sep 17, 2014
Accepted: Nov 14, 2014
Published online: Apr 23, 2015
Published in print: Aug 1, 2015
Discussion open until: Sep 23, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.