Bending of Moderately Thick Annular Sector Plates with Variable Thickness and General Boundary Conditions Using Extended Knatorovich Method
Publication: Journal of Engineering Mechanics
Volume 141, Issue 8
Abstract
An analytical solution for bending of variable thickness annular sector plates is presented using the multiterm extended Kantorovich method (MTEKM). Utilizing the principle of minimum total potential energy the governing equations are derived based on the first-order shear deformation theory and converted into two sets of coupled ordinary differential equations (ODEs) using MTEKM. Next, the derived sets of ODEs are solved analytically by the application of state-space method. To show the applicability of the present method various examples are investigated. Moreover, solid sector plates as well as rectangular plates are studied as special cases. Results of the present method are compared to those of other methods whenever possible, as well as results obtained by the finite-element method (FEM). It is found that the method proposed here exhibits a high convergence rate as well as presenting accurate results in all cases.
Get full access to this article
View all available purchase options and get full access to this article.
References
Aghdam, M., and Mohammadi, M. (2009). “Bending analysis of thick orthotropic sector plates with various loading and boundary conditions.” Compos. Struct., 88(2), 212–218.
Aghdam, M., Mohammadi, M., and Erfanian, V. (2007). “Bending analysis of thin annular sector plates using extended Kantorovich method.” Thin Wall Struct., 45(12), 983–990.
Aghdam, M., Shahmansouri, N., and Mohammadi, M. (2010). “Extended Kantorovich method for static analysis of moderately thick functionally graded sector plates.” Math. Comput. Simul., 86, 118–130.
Cheung, M., and Chan, M. (1981). “Static and dynamic analysis of thin and thick sectorial plates by the finite strip method.” Comput. Struct., 14(1–2), 79–88.
Conway, H., and Huang, M. (1952). “The bending of uniformly loaded sectorial plates with clamped edges.” J. Appl. Mech., 19, 5–8.
Dalaei, M., and Kerr, A. (1995). “Analysis of clamped rectangular orthotropic plates subjected to a uniform lateral load.” Int. J. Mech. Sci., 37(5), 527–535.
Edery-Azulay, L., and Abramovich, H. (2008). “Piezolaminated plates - highly accurate solution based on the extended Kantorovich method.” Compos. Struct., 84(3), 241–247.
Fariborz, S., and Pourbohloul, A. (1989). “Application of the extended Kantorovich method to the bending of variable thickness plates.” Comput. Struct., 31(6), 957–965.
Harik, I. (1984). “Analytical solution to orthotropic sector.” J. Eng. Mech, 554–568.
Harik, I., and Fang, Y. (1992). “Semi-numerical solution to bending of sector plates and curved slabs of variable stiffness.” Comput. Struct., 43(1), 113–123.
Hosseini-Hashemi, S., Rokni Damavandi Taher, H., and Akhavan, H. (2010). “Vibration analysis of radially FGM sectorial plates of variable thickness on elastic foundations.” Compos. Struct., 92(7), 1734–1743.
Kapuria, S., and Kumari, P. (2013). “Extended Kantorovich method for coupled piezoelasticity solution of piezolaminated plates showing edge effects.” Proc. R. Soc. London Ser. A, 469(2151), 20120565.
Kapuria, S., and Kumari, P. (2012). “Multiterm extended Kantorovich method for three-dimensional elasticity solution of laminated plates.” J. Appl. Mech., 79(6), 061018.
Kerr, A. (1968). “An extension of the Kantorovich method.” Q. Appl. Math., 26(2), 219–229.
Kobayashi, H., and Turvey, G. (1994). “Elastic small deflection analysis of annular sector Mindlin plates.” Int. J. Mech. Sci., 36(9), 811–827.
Kumari, P., Kapuria, S., and Rajapakse, R. K. N. D. (2014). “Three-dimensional extended Kantorovich solution for Levy-type rectangular laminated plates with edge effects.” Compos. Struct., 107, 167–176.
Liew, K., and Liu, F. (2000). “Differential quadrature method for vibration analysis of shear deformable annular sector plates.” J. Sound Vib., 230(2), 335–356.
Lim, G., and Wang, C. (2000). “Bending of annular sectorial Mindlin plates using Kirchhoff results.” Eur. J. Mech. A-Solid, 19(6), 1041–1057.
Liu, F., and Liew, K. (1999). “Differential quadrature element method for static analysis of Reissner-Mindlin polar plates.” Int. J. Solids Struct., 36(33), 5101–5123.
McGee, O., Huang, C., and Leissa, A. (1995). “Comprehensive exact solutions for free vibrations of thick annular sectorial plates with simply supported radial edges.” Int. J. Mech. Sci., 37(5), 537–566.
Mermertas, V., and Belek, H. (1990). “Static and dynamic stability of variable thickness annular plates.” J. Sound Vib., 141(3), 435–448.
Naserian Nik, A., and Tahani, M. (2009). “Analytical solutions for bending analysis of rectangular laminated plates with arbitrary lamination and boundary conditions.” J. Mech. Sci. Technol., 23(8), 2253–2267.
Naserian Nik, A., and Tahani, M. (2010). “Free vibration analysis of moderately thick rectangular laminated composite plates with arbitrary boundary conditions.” Struct. Eng. Mech., 35(2), 217–240.
Nath, Y., Sharda, H., and Sharma, A. (2005). “Non-linear analysis of moderately thick sector plates.” Commun. Nonlinear Sci. Numer. Simul., 10(7), 765–778.
Nie, G., and Zhong, Z. (2008). “Vibration analysis of functionally graded annular sectorial plates with simply supported radial edges.” Compos. Struct., 84(2), 167–176.
Ramachandra, R., and Sridhara, J. (1970). “Biorthogonality relation for clamped sector plates.” J. Eng. Math., 4(4), 361–367.
Reddy, J., Wang, C., and Kitiporncha, S. (1999). “Axisymmetric bending of functionally graded circular and annular plates.” Eur. J. Mech. A-Solid, 18(2), 185–199.
Salehi, M., and Shahidi, A. (1994). “Large deflection analysis of elastic Mindlin sector plates.” Comput. Struct., 52(5), 987–998.
Salehi, M., and Sobhani, A. (2004). “Elastic linear and non-linear analysis of fiber-reinforced symmetrically laminated sector Mindlin plate.” Compos. Struct., 65(1), 65–79.
Salehi, M., and Turvey, G. (1991). “Elastic large deflection response of annular sector plates a comparison of dr finite-difference, finite element and other numerical solutions.” Comput. Struct., 40(5), 1267–1278.
Shahzamanian, M., Sahari, B., Bayat, M., and Mustapha, F. (2010). “Finite element analysis of thermoelastic contact problem in functionally graded axisymmetric brake disks.” Compos. Struct., 92(7), 1591–1602.
Shufirn, I., and Eisenberger, M. (2005). “Stability and vibration of shear deformable plates - first order and higher order analyses.” Int. J. Solids Struct., 42(3–4), 1225–1251.
Shufirn, I., Rabinovitch, O., and Eisenberger, M. (2008a). “Buckling of laminated plates with general boundary conditions under combined compression, tension and shear - a semi analytical approach.” Thin Wall Struct., 46(7–9), 925–938.
Shufirn, I., Rabinovitch, O., and Eisenberger, M. (2008b). “Buckling of symmetrically laminated rectangular plates with general boundary conditions - a semi analytical approach.” Compos. Struct., 82(4), 521–531.
Sridhar, C., and Rao, K. (1995). “Large deformation finite element analysis of laminated circular composite plates.” Comput. Struct., 54(1), 59–64.
Tahani, M., and Andakhshideh, A. (2012). “Interlaminar stresses in thick rectangular laminated plates with arbitrary laminations and boundary conditions under transverse loads.” Compos. Struct., 94(5), 1793–1804.
Tahani, M., and Naserian-Nik, A. (2013). “Bending analysis of piezolaminated rectangular plates under electromechanical loadings using multi-term extended Kantorovich method.” Mech Adv. Mater. Struct., 20(6), 415–433.
Tahani, M., Nosier, A., and Zebarjad, S. (2005). “Deformation and stress analysis of circumferentially fiber-reinforced composite disks.” Int. J. Solids Struct., 42(9–10), 2741–2754.
Ungbhakorn, V., and Singhatanadgid, P. (2006). “Buckling analysis of symmetrically laminated composite plates by the extended Kantorovich method.” Compos. Struct., 73(1), 120–128.
Vaidyanathan, S., Busby, H., and Houser, D. (1994). “A numerical approach to the static analysis of an annular sector Mindlin plate with applications to bevel gear design.” Comput. Struct., 51(3), 255–266.
Yuan, S., and Jin, Y. (1998). “Computation of elastic buckling loads of rectangular thin plates using the extended Kantorovich method.” Comput. Struct., 66(6), 861–867.
Zenkour, M. (2004). “Bending of a sector-shaped annular plate with continuous thickness variation along the radial direction.” Q. J. Mech. Appl. Math., 57(2), 205–223.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Mar 27, 2014
Accepted: Nov 14, 2014
Published online: Apr 27, 2015
Published in print: Aug 1, 2015
Discussion open until: Sep 27, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.