Abstract
The aim of this paper is to investigate the effect of soil grading on the stress-strain and the critical-state behavior of granular materials from idealized spheres to natural soils as well as from discrete to continuous modeling. The three-dimensional discrete-element method has been applied to study the mechanical behavior of idealized granular materials. The results confirm that the critical-state line (CSL) shifts downward as grading broadens with an increase of the coefficient of uniformity . An exponential relationship between the critical-state parameters and the coefficient of uniformity can then be established. Furthermore, experimental investigations on an artificial material (glass beads) and a natural material (Hostun sand) were carried out. The experimental results confirm the grading dependency of the critical-state behavior, and a similar relationship between CSL and , for both glass beads and natural sand, extending previous literature results for high values up to 20. Moreover, the experimental results show that the CSL tends to stabilize when the coefficient of uniformity becomes higher than 10. Based on all test results, a simple elastoplastic model accounting for the influence of the grain size distribution (GSD) on the mechanical behavior of granular materials has been developed within the framework of critical-state soil mechanics. Comparisons between experimental results and simulations show that the model can accurately reproduce the mechanical behavior of granular materials with different GSDs.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors gratefully acknowledge the financial support provided by the European Program TANDEM, the Natural Science Foundation of China/French National Research Agency (NSFC/ANR) Joint Research Grant (No. 51161130523), the China Scholarship Council, and the Natural Science Foundation of China (Grant Nos. 41372285, 41330633, 41172251, 41002095, and 41272317). The authors thank Professor Zhen-Yu Yin of Shanghai Jiao Tong University and Dr. Jidong Zhao of Hong Kong University of Science and Technology for their advice and support.
References
Been, K., and Jefferies, M. G. (1985). “A state parameter for sands.” Géotechnique, 35(2), 99–112.
Biarez, J., and Hicher, P. Y. (1994). Elementary mechanics of soil behaviour: Saturated remoulded soils, Balkema, Rotterdam, Netherlands.
Biarez, J., and Hicher, P. Y. (1997). “Influence de la granulométrie et de son évolution par ruptures de grains sur le comportement mécanique de matériaux granulaires.” Rev. Fr. Genie Civ., 1(4), 607–631 (in French).
Carrera, A., Coop, M., and Lancellotta, R. (2011). “Influence of grading on the mechanical behaviour of Stava tailings.” Géotechnique, 61(11), 935–946.
Cho, G.-C., Dodds, J., and Santamarina, J. C. (2006). “Particle shape effects on packing density, stiffness, and strength: Natural and crushed sands.” J. Geotech. Geoenviron. Eng., 591–602.
Coop, M. (1990). “The mechanics of uncemented carbonate sands.” Géotechnique, 40(4), 607–626.
Cundall, P. A., and Strack, O. D. L. (1979). “A discrete numerical model for granular assemblies.” Géotechnique, 29(1), 47–65.
Daouadji, A., Hicher, P.-Y., and Rahma, A. (2001). “An elastoplastic model for granular materials taking into account grain breakage.” Eur. J. Mech. A, Solids, 20(1), 113–137.
Datta, M., Gulhati, S., and Rao, G. (1979). “Crushing of calcareous sands during shear.” Proc., 11th Annual Offshore Technology Conf., Offshore Technology Conference, Houston.
Einav, I. (2007). “Breakage mechanics—Part I: Theory.” J. Mech. Phys. Solids, 55(6), 1274–1297.
Gajo, A., and Muir Wood, D. (1999). “Severn-Trent sand: A kinematic-hardening constitutive model: The formulation.” Géotechnique, 49(5), 595–614.
Ghanbari, A., Sadeghpour, A. H., Mohamadzadeh, H., and Mohamadzadeh, M. (2008). “An experimental study on the behavior of rockfill materials using large scale tests.” Electron. J. Geotech. Eng., 13(G), 1–16.
Hu, W., Yin, Z. Y., Dano, C., and Hicher, P.-Y. (2011). “A constitutive model for granular materials considering grain breakage.” Sci. China, Ser. E: Technol. Sci., 54(8), 2188–2196.
Indraratna, B., Lackenby, J., and Christie, D. (2005). “Effect of confining pressure on the degradation of ballast under cyclic loading.” Géotechnique, 55(4), 325–328.
Indraratna, B., Wijewardena, L. S. S., and Balasubramaniam, A. S. (1993). “Large-scale triaxial testing of greywacke rockfill.” Géotechnique, 43(1), 37–51.
Ishihara, K. (1993). “Liquefaction and flow failure during earthquakes.” Géotechnique, 43(3), 351–415.
Ishihara, K., Tatsuoka, F., and Yasuda, S. (1975). “Undrained deformation and liquefaction of sand under cyclic stresses.” Soils Found., 15(1), 29–44.
Iwashita, K., and Oda, M. (2000). “Micro-deformation mechanism of shear banding process based on modified distinct element method.” Powder Technol., 109(1–3), 192–205.
Jiang, M. J., Yan, H. B., Zhu, H. H., and Utili, S. (2011). “Modeling shear behavior and strain localization in cemented sands by two-dimensional distinct element method analyses.” Comput. Geotech., 38(1), 14–29.
Kikumoto, M., Muir Wood, D., and Russell, A. (2010). “Particle crushing and deformation behaviour.” Soils Found., 50(4), 547–563.
Li, X. S., and Dafalias, Y. F. (2000). “Dilatancy for cohesionless soils.” Géotechnique, 50(4), 449–460.
Li, X. S., and Wang, Y. (1998). “Linear representation of steady-state line for sand.” J. Geotech. Geoenviron. Eng., 1215–1217.
Lobo-Guerrero, S., and Vallejo, L. E. (2006). “Discrete element method analysis of railtrack ballast degradation during cyclic loading.” Granul. Matter, 8(3–4), 195–204.
Lu, M., and McDowell, G. R. (2010). “Discrete element modelling of railway ballast under monotonic and cyclic triaxial loading.” Géotechnique, 60(6), 459–467.
Luong, M. P. (1982). “Stress-strain aspects of cohesiveless soils under cyclic and transient loading [C].” Proc., Int. Symp. on Soils under Cyclic and Transient Loading, Wiley, New York, 315–324.
Muir Wood, D., and Maeda, K. (2008). “Changing grading of soil: Effect on critical states.” Acta Geotech., 3(1), 3–14.
Muir Wood, D., Maeda, K., and Nukudani, E. (2010). “Modelling mechanical consequences of erosion.” Géotechnique, 60(6), 447–457.
Ng, T.-T. (2006). “Input parameters of discrete element methods.” J. Eng. Mech., 723–729.
Ng, T.-T. (2008). “Effect of sample size and shape on critical state.” Proc., GeoCongress 2008: Characterization, Monitoring, and Modeling of GeoSystems, Geotechnical special publication 179, A. N. Alshawabkeh, K. R. Reddy, and M. V. Khire, eds., ASCE, Reston, VA, 950–957.
O'Sullivan, C., Bray, J. D., and Li, S. (2003). “A new approach for calculating strain for particulate media.” Int. J. Numer. Anal. Methods Geomech., 27(10), 859–877.
Particle Flow Code in 3 Dimensions (PFC3D) 3.10 [Computer software]. Minneapolis, Itasca Consulting Group.
Richart, F. E., Hall, J. R., and Woods, R. D. (1970). Vibrations of soils and foundations: International series in theoretical and applied mechanics, Prentice Hall, Upper Saddle River, NJ.
Verdugo, R., and de la Hoz, K. (2007). “Strength and stiffness of coarse granular soils.” Proc., Geotechnical Symp.: Soil Stress-Strain Behavior: Measurement, Modeling and Analysis, Springer, Rotterdam, Netherlands, 243–252.
Vermeer, P. (1978). “A double hardening model for sand.” Géotechnique, 28(4), 413–433.
Yan, W. M., and Dong, J. (2011). “Effect of particle grading on the response of an idealized granular assemblage.” Int. J. Geomech., 276–285.
Yang, Z. X., Jardine, R. J., Zhu, B. T., Foray, P., and Tsuha, C. H. C. (2010). “Sand grain crushing and interface shearing during displacement pile installation in sand.” Géotechnique, 60(6), 469–482.
Yasufuku, N., and Hyde, A. F. L. (1995). “Pile end-bearing capacity in crushable sands.” Géotechnique, 45(4), 663–676.
Yimsiri, S., and Soga, K. (2011). “Effects of soil fabric on behaviors of granular soils: Microscopic modeling.” Comput. Geotech., 38(7), 861–874.
Yin, Z.-Y., and Chang, C. S. (2011). “Stress-dilatancy behavior for sand under loading and unloading conditions.” Int. J. Numer. Anal. Methods Geomech., 37(8), 855–870.
Yin, Z.-Y., Chang, C. S., and Hicher, P.-Y. (2010). “Micromechanical modelling for effect of inherent anisotropy on cyclic behaviour of sand.” Int. J. Solids Struct., 47(14–15), 1933–1951.
Information & Authors
Information
Published In
Journal of Engineering Mechanics
Volume 141 • Issue 6 • June 2015
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Jan 9, 2013
Accepted: Aug 14, 2014
Published online: Nov 17, 2014
Published in print: Jun 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.