Green’s Function Method for Stability Analysis of Stochastic Structures
Publication: Journal of Engineering Mechanics
Volume 141, Issue 3
Abstract
The governing equations for the stability analysis of stochastic frame structures with small variations of the material and geometry parameters are established for the means and deviations of responses by including first-order terms. Taking advantage of the similarity between these equations and the governing equations for static analysis, a new Green’s function method based on the fundamental solutions for static problems is proposed for the stability analysis of stochastic structures in conjunction with multidomain techniques. The numerical examples presented show that there is good agreement between the results of the proposed method and those from Monte Carlo simulation for small variation situations, and that the new approach is more efficient than the perturbation stochastic FEM. Based on the numerical results, the effects of the covariance type, correlation scale parameter, coefficient of variation, and discretization of random fields, as well as the location of fictitious loads, are investigated.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This project was funded by the National Natural Science Foundation of China (51078150); the State Key Laboratory of Subtropical Building Science, South China University of Technology (2013ZA01); and the Research Fund for the Doctoral Program of Higher Education (20110172120038).
References
Adomian, G., Bellomo, N., and Riganti, R. (1983). “Semilinear stochastic systems: Analysis with the method of the stochastic Green's function and application in mechanics.” J. Math. Anal. Appl., 96(2), 330–340.
Alibrandi, U., Impollonia, N., and Ricciardi, G. (2010). “Probabilistic eigenvalue buckling analysis solved through the ratio of polynomial response surface.” Comput. Meth. Appl. Mech. Eng., 199(9–12), 450–464.
Altus, E., and Totry, E. M. (2003). “Buckling of stochastically heterogeneous beams, using a functional perturbation method.” Int. J. Solids Struct., 40(23), 6547–6565.
Bayin, S. S. (2006). Mathematical methods in science and engineering, Wiley, Hoboken, NJ.
Elishakoff, I. (2000). “Uncertain buckling: Its past, present and future.” Int. J. Solids Struct., 37(46–47), 6869–6889.
Garrett, J. (1992). “Critical buckling load statistics of an uncertain column.” Proc., 6th Specialty Conf. on Probabilistic Mechanics, and Structural and Geotechnical Reliability, ASCE, New York, 563–566.
Graham, L. L., and Siragy, E. F. (2001). “Stochastic finite-element analysis for elastic buckling of stiffened panels.” J. Eng. Mech., 91–97.
Heckl, M. A., and Howe, M. S. (2007). “Stability analysis of the Rijke tube with a Green’s function approach.” J. Sound Vib., 305(4–5), 672–688.
Hu, S. Z., and Ni, G. J. (2002). Mathematical methods for physicists, 2nd Ed., Higher Education, Beijing (in Chinese).
Keanini, R. G. (2011). “Green’s function-stochastic methods framework for probing nonlinear evolution problems: Burger’s equation, the nonlinear Schrödinger’s equation, and hydrodynamic organization of near-molecular-scale vorticity.” Ann. Phys., 326(4), 1002–1031.
Li, C.-C., and Der Kiureghian, A. (1993). “Optimal discretization of random fields.” J. Eng. Mech., 1136–1154.
Li, S. Y., and Chen, B. C. (2008). “Stochastic static analysis on spatial stability of CFST tilt-basket arch bridge.” J. Changsha Commun. Univ., 24(4), 1–5 (in Chinese).
Li, Z.-C., Huang, H.-T., Lee, M.-G., and Chiang, J. Y. (2013). “Error analysis of the method of fundamental solutions for linear elastostatics.” J. Comput. Appl. Math., 251(Oct), 133–153.
Lin, D. J., and Qin, Q. (2005). “Reliability stochastic finite element analysis of in-plane buckling of an existing arch bridge.” Eng. Mech., 22(6), 122–126 (in Chinese).
Liu, J. S. (2001). Monte Carlo strategies in scientific computing, Springer, New York.
Palassopoulos, G. V. (1992). “Response variability of structures subjected to bifurcation buckling.” J. Eng. Mech., 1164–1183.
Polyanin, A. D. (2002). Handbook of linear partial differential equations for engineers and scientists, Chapman & Hall/CRC, Boca Raton, FL.
Simitses, G. J., and Hodges, D. H. (2006). Fundamentals of structural stability, Elsevier, Amsterdam, Netherlands.
Su, C., and Fan, X. M. (2003). “Stochastic analysis of Yamen Bridge at erection stage in consideration of variant material and loading parameters.” Bridge Constr., 33(1), 62–65 (in Chinese).
Su, C., and Fan, X. M. (2005). “Parameter sensitivity and reliability analysis during construction control of cable-stayed bridges.” China Civ. Eng. J., 38(10), 81–87 (in Chinese).
Su, C., and Fan, X. M. (2009). “Dynamic eigenvalue analysis of stochastic structures by the Green’s method.” Chin. J. Comput. Mech., 26(3), 294–300 (in Chinese).
Teng, Q. J., Zhang, Z., and Li, S. Y. (2006). “Reliability analysis of long-span CFST narrow arch bridge’s stability.” J. Dalian Univ. Technol., 46(Special issue), 144–150 (in Chinese).
Vanmarcke, E. H. (1983). Random fields, Massachusetts Institute of Technology, Cambridge, MA.
Zhang, J., and Ellingwood, B. (1995). “Effects of uncertain material properties on structural stability.” J. Struct. Eng., 705–716.
Zhao, L., and Chen, Q. (1996). “The weighted residual method by Monte Carlo for random numerical analysis of structures.” Comput. Struct. Mech. Appl., 13(2), 193–200 (in Chinese).
Zhu, W. Q., Ren, Y. J., and Wu, W. Q. (1992). “Stochastic FEM based on local averages of random vector fields.” J. Eng. Mech., 496–511.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Jul 24, 2011
Accepted: Jul 2, 2014
Published online: Jul 31, 2014
Published in print: Mar 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.