Experimental Investigation on the Impact Performance of Concrete-Filled FRP Steel Tubes
Publication: Journal of Engineering Mechanics
Volume 141, Issue 2
Abstract
The dynamic response of concrete-filled fiber-reinforced polymer (FRP) steel tubes under impact loading was investigated in this study. Eleven column specimens with the same cross-sectional area but different lengths were tested on a drop-weight system. These specimens included eight concrete-filled carbon-FRP steel tubes, two concrete-filled glass-FRP steel tubes, and one concrete-filled steel tube as a baseline material. The time-history curves of impact force, acceleration, deflection, and strain were recorded. Experimental results showed that the improvement of FRP on the impact resistance of concrete-filled steel tubes is remarkable, especially for glass-FRP steel tubes.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work is supported by National Natural Science Foundation of China through grant No. 3132014326. The authors express their thanks for the Fundamental Research Funds for the Central Universities (grant No. 3132013315). The authors also thank the Chinese Scholarship Council.
References
Bambach, M. R., Elchalakani, M., and Zhao, X. L. (2009). “Composite steel–CFRP SHS tubes under axial impact.” Compos. Struct., 87(3), 282–292.
Bogdanovich, A., and Friedrich, K. (1994). “Initial and progressive failure analysis of laminated composite structures under dynamic loading.” Compos. Struct., 27(4), 439–456.
Chen, Z. Y., Luo, J. Q., and Pan, X. W. (1986). “Behavior of concrete filled steel tubular columns under axial rapid loading.” Research Laboratory of Earthquake and Blast Resistant Engineering Technical Rep. No. 4, Tsinghua University Press, Beijing.
Hanefi, E. H., and Wierzbicki, T. (1996). “Axial resistance and energy absorption of externally reinforced metal tubes.” Composites Part B, 27(5), 387–394.
Hosseinzadeh, R., Shokrich, M. M., and Lessard, L. (2006). “Damage behavior of fiber reinforced composite plates subjected to drop weight impacts.” Compos. Sci. Technol., 66(1), 61–68.
Huo, J. S., Ren, X. H., and Xiao, Y. (2012). “Impact behavior of concrete-filled steel tubular stub columns under ISO-834 standard fire.” China Civ. Eng. J., 4(45), 9–20.
Huo, J. S., Zheng, Q., Chen, B. S., and Xiao, Y. (2009). “Tests on impact behaviour of micro-concrete-filled steel tubes at elevated temperatures up to 400°C.” Mater. Struct., 42(10), 1325–1334.
Kersys, A., Kersiene, N., and Ziliukas, A. (2010). “Experimental research of the impact response of E-glass/epoxy and carbon/epoxy composite systems.” Mater. Sci., 16(4), 1302–1320.
Li, Z., et al. (2006). “The research of the dynamic property of steel tube-confined concrete short column under axial impact loads.” J. Taiyuan Univ. Technol., 37(4), 383–385.
Naik, N. K., and Sekher, Y. C. (1998). “Damage in laminated composites due to low velocity impact.” J. Reinf. Plast. Compos., 17(14), 1232–1263.
Prichard, S. J., and Perry, S. H. (2000). “The impact behavior of sleeved concrete cylinders.” Struct. Eng., 78(17), 23–27.
Ren, X. H., Huo, J. S., and Chen, B. S. (2011). “Dynamic behaviors of concrete-filled steel tubular stub columns after exposure to high temperature.” J. Vibr. Shock, 30(11), 67–73.
Sevkat, E., Liaw, B. M., Delale, F., and Raju, B. B. (2009). “Drop-weight impact of plain-woven hybrid glass–graphite/toughened epoxy composites.” Composites Part A, 40(8), 1090–1110.
Shen, W. Q. (1997). “Dynamic response of rectangular plates under drop mass impact.” Int. J. Impact Eng., 19(3), 207–229.
Shiva Shankar, G. S., and Vijayarangan, S. (2006). “Mono composite leaf spring for light weight vehicle—Design, end joint analysis and testing.” Mater. Sci., 12(3), 220–225.
Song, H.-W., Wan, Z.-M., Xie, Z.-M., and Du, X.-W. (2000). “Axial impact behavior and energy absorption efficiency of composite wrapped metal tubes.” Int. J. Impact Eng., 24(4), 385–401.
Wang, X. A., and Lu, G. (2002). “Axial crushing force of externally fibre-reinforced metal tubes.” Proc. Inst. Mech. Eng., 216(9), 863–873.
Wang, X. G. (1991). “Crushing behaviour of multi-material tubular structures.” Ph.D. thesis, Dept. of Solid Mechanics, École Centrale de Lyon, Lyon, France.
Xiao, Y., et al. (2005). “Impact tests of concrete-filled tubes and confined concrete filled tubes.” Proc., 6th Int. Conf. on Shock and Impact Loads on Structures, School of Civil and Resource Engineering, Univ. of Western Australia, Perth, WA, Australia.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Apr 10, 2014
Accepted: Jun 4, 2014
Published online: Jun 25, 2014
Published in print: Feb 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.