Method for Predicting the Failure Load of Masonry Wall Panels Based on Generalized Strain-Energy Density
Publication: Journal of Engineering Mechanics
Volume 140, Issue 8
Abstract
This paper develops a generalized strain-energy density (GSED)–based method to predict the failure loads of laterally loaded masonry wall panels. The method reveals the relationship between the failure loads of the base/test and the new masonry wall panels in the sense of GSED and directly uses the existing testing data in the predicting task. First, the GSED values of the base panel are extracted from its finite-element analysis (FEA) result. Second, similar zones between the base and the new wall panels are matched through the criterion for matching zone similarity. Then, the GSED values on the base wall panel are projected into similar zones on the new wall panel. Finally, the GSED-based parameter is proposed to relate the failure load of the new wall panel. The case studies validate the GSED-based method by comparing the existing yield line method and the FEA method. The GSED-based method explores an innovative way of structural analysis by combining the FEA and cellular automata methods and directly applying testing data.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors thank the Yoh Foundation, Egg Harbor Township, New Jersey, for financial sponsorship, which provided the first funding to open this research subject. This project has also been supported financially by the National Science & Technology Pillar Program (Grant No. 2013BAJ12B03) and Postdoctoral Science Foundation of China (Grant No. 2011M500674), Beijing, China.
References
Baker, L. R. (1980). Lateral loading of masonry panels: Structural design of masonry, Cement and Concrete Association of Australia, Sydney, Australia.
Brinker R. (1984). “Yield line theory and material properties of lateral loaded masonry panels.” Masonry Int., 1, 8–17.
British Standards Institution (BSI). (1992). “Code of practice for use of masonry. Structural use of unreinforced masonry.” BS 5628, London.
Chong, V. L. (1993). “The behavior of laterally loaded masonry panels with openings.” Ph.D. thesis, Univ. of Plymouth, Plymouth, U.K.
Fried, A., Anderson, C., and Smith, D. (1988). “Predicting the transverse lateral strength of masonry walls.” Proc., 8th IBMAC, Elsevier Applied Science, London, 1171–1183.
Lawrence, S. J. (1983). “Behavior of brick masonry walls under lateral loading.” Ph.D. thesis, Univ. of New South Wales, Sydney, Australia.
Lourenço, P. B. (2000). “Anisotropic softening model for masonry plates and shells.” J. Struct. Eng., 1008–1016.
Maerivoet, S., and Moor, B. D. (2005). “Cellular automata models of road traffic.” Phys. Rep., 419(1), 1–64.
Milani G., and Lourenço, P. B. (2010). “A simplified homogenized limit analysis model for randomly assembled blocks out-of-plane loaded.” Comput. Struct., 88(11-12), 690–717.
Rabinovitch, O., and Madah, H. (2011). “Finite element modeling and shake-table testing of unidirectional infill masonry walls under out-of-plane dynamic loads.” Eng. Struct., 33(9), 2683–2696.
Taha, M. M., Noureldin, A., El-Sheimy, N., and Shrive, N. G. (2003). “Artificial neural networks for predicting creep with an example application to structural masonry.” Can. J. Civ. Eng., 30(3), 523–532.
Zhang, Y., Zhou, G. C., Xiong, Y., and Rafiq, M. Y. (2010). “Techniques for predicting cracking pattern of masonry wallet using artificial neural networks and cellular automata.” J. Comput. Civ. Eng., 161–172.
Zhou, G. C. (2002). “Application of stiffness/strength corrector and cellular automata in predicting response of laterally loaded masonry wall panels.” Ph.D. thesis, Univ. of Plymouth, Plymouth, U.K.
Zhou, G. C., Pan, D., Xu, X., and Rafiq, M. Y. (2010). “Innovative ANN technique for predicting failure/cracking load of masonry wall panel under lateral load.” J. Comput. Civ. Eng., 377–387.
Zhou, G. C., Rafiq, M. Y., Bugmann, G. C., and Easterbrook, D. J. (2006). “Cellular automata model for predicting the cracking pattern of laterally loaded masonry panels.” J. Comput. Civ. Eng., 400–409.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: May 29, 2013
Accepted: Jan 13, 2014
Published online: Feb 24, 2014
Discussion open until: Jul 24, 2014
Published in print: Aug 1, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.