New Finite-Element Formulation for Buckling Analysis of Cracked Structures
Publication: Journal of Engineering Mechanics
Volume 140, Issue 5
Abstract
A crack in a steel structure will cause a local change in its stiffness. The change in stiffness will lead to a change in buckling loads and a discontinuity in the associated buckling modes. The changes in the buckling characteristics of columns cause a change in the buckling stability of the structure. The effect of cracks on the buckling load of structural systems can be investigated through numerical methods. The FEM is a well-known method for this work. In this paper, a new and innovative finite-element (FE) formulation for the buckling analysis of cracked columns is presented. The method presented is simpler and, at the same time, more accurate and practical than those available in the literature. The proposed FE formulation for cracked columns has the same format as that for intact columns. The formulation is used successfully in efficient and accurate buckling analysis of cracked frames.
Get full access to this article
View all available purchase options and get full access to this article.
References
Arif Gurel, M. (2007). “Buckling of slender prismatic circular columns weakened by multiple edge cracks.” Acta Mech., 188(1–2), 1–19.
Bilello, C. (2001). “Theoretical and experimental investigation on damaged beams under moving systems.” Ph.D. thesis, Univ. degli Studi di Palermo, Palermo, Italy.
Burnet, D. S. (1981). Finite element analysis: From concepts to applications, Addison-Wesley, Reading, MA.
Caddemi, S., and Calio, I. (2008). “Exact solution for the multi-cracked Euler-Bernoulli column.” Int. J. Solids Struct., 45(5), 1332–1351.
Caddemi, S., and Calio, I. (2012). “The influence of the axial force on the vibration of the Euler–Bernoulli beam with an arbitrary number of cracks.” Arch. Appl. Mech., 82(6), 827–839.
Caddemi, S., and Calio, I. (2013a). “The exact explicit dynamic stiffness matrix of multi-cracked Euler–Bernoulli beam and applications to damaged frame structures.” J. Sound Vib., 332(12), 3049–3063.
Caddemi, S., and Calio, I. (2013b). “The exact stability stiffness matrix for the analysis of multi-cracked frame structure.” Comput. Struct., 125, 137–144.
Caddemi, S., Calio, I., Cannizzaro, F., and Rapicavoli, D. (2013). “A novel beam finite element with singularities for the dynamic analysis of discontinuous frames.” Arch. Appl. Mech., 83(10), 1451–1468.
Chandra Kishen, J. M., and Kumar, A. (2004). “Finite element analysis for fracture behavior of cracked beam-columns.” Finite Elem. Anal. Des., 40(13–14), 1773–1789.
Chen, T. Y., and Zhang, H. Y. (1996). “Stress analysis of spatial frames with consideration of local flexibility of multiplanar tubular joint.” Eng. Struct., 18(6), 465–471.
Chen, W. F., and Lui, E. M. (1987). Structural stability: Theory and implementation, Elsevier Science, New York.
Chondros, T. J., Dimarogonas, A. D., and Yao, J. (1998). “A continuous cracked beam vibration theory.” J. Sound Vibrat., 215(1), 17–34.
Kreyszig, E. (1999). Advanced engineering mathematics, 8th Ed., Wiley, New York.
Liebowitz, H., and Claus, W. D., Jr. (1968). “Failure of notched columns.” Eng. Fract. Mech., 1(2), 379–383.
Liebowitz, H., Vanderveldt, H., and Harris, D. W. (1967). “Carrying capacity of notched columns.” Int. J. Solids Struct., 3(4), 489–500.
Ostachowicz, W. M., and Krawczuk, C. (1991). “Analysis of the effect of cracks on the natural frequencies of a cantilever beam.” J. Sound Vib., 150(2), 191–201.
Ranjbaran, A. (2010). “Analysis of cracked members: The governing equations and exact solutions.” Iran. J. Sci. Technol. Trans. B, 34(4), 407–417.
Ranjbaran, A., Hashemi, S., and Ghaffarian, A. R. (2008). “A new approach for buckling and vibration analysis of cracked column.” Int. J. Eng. Trans. A, 21(3), 225–230.
Rouhan, A., and Wielgosz, C. (2002). “A beam finite element for through-cracked tubular node behavior modeling.” Commun. Numer. Methods Eng., 18(8), 555–564.
Schoefs, F., Le Van, A., and Rguig, M. (2008). “A cracked beam finite element for through-cracked tube.” Commun. Numer. Methods Eng., 24(9), 761–775.
Skrinar, M. (2012). “On the derivation of symbolic form of stiffness matrix and load vector of a beam with an arbitrary number of transverse cracks.” Comput. Mater. Sci., 52(1), 253–260.
Skrinar, M. (2013). “Computational analysis of multi-stepped beams and beams with linearly varying heights implementing closed-form finite element formulation for multi-cracked beam elements.” Int. J. Solids Struct., 50(14–15), 2527–2541.
Tharp, T. M. (1987). “A finite element for edge-cracked beam columns.” Int. J. Numer. Methods Eng., 24(10), 1941–1950.
Wang, C. Y., Wang, C. M., and Aung, T. M. (2004). “Buckling of a weakened column.” J. Eng. Mech., 1373–1376.
Wang, J., and Qiao, P. (2007). “Vibration of beams with arbitrary discontinuities and boundary conditions.” J. Sound Vib., 308(1–2), 12–27.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Mar 19, 2013
Accepted: Oct 18, 2013
Published online: Oct 21, 2013
Published in print: May 1, 2014
Discussion open until: Jun 13, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.