Peak Distributions and Peak Factors of Wind-Induced Pressure Processes on Tall Buildings
Publication: Journal of Engineering Mechanics
Volume 139, Issue 12
Abstract
The emergence of performance-based wind engineering calls for improved probabilistic modeling of wind effects on buildings. This paper focuses on the development of probabilistic models of the peak distribution and peak factor for non-Gaussian processes and explores the applications of this development in wind engineering. The closed-form expressions for the mean, SD, and fractile levels of extremes are derived for a random process whose peaks are modeled by the parametric Weibull distribution. A new translated-peak-process method is then developed for the estimation of the peak distribution, peak factor, and variability of extremes, based on the Weibull distribution and point-to-point mapping procedure. The proposed translated-peak-process method is validated by wind-tunnel pressure measurements on a standard tall building and is shown to be more robust and practical than many existing methods in analyzing non-Gaussian wind pressure data.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The work described in this paper was partially supported by the National Natural Science Foundation of China (Project No. 51008275, 90815023, and 51021140006); the Ministry of Transport of the People's Republic of China (Project No. 2011318223170); the Scientific Plan Project of Zhejiang Province of China (Project No. 2012C21059); and the Fundamental Research Funds for the Central Universities of China (Project No. 2012QNA4013).
References
Australian/New Zealand Standard (AS/NZS). (2002). “Structural design actions part 2: Wind actions.” AS/NZS 1170.2, Sydney, NSW, Australia.
Binh, L. V., Ishihara, T., Phuc, P. V., and Fujino, Y. (2008). “A peak factor for non-Gaussian response analysis of wind turbine tower.” J. Wind Eng. Ind. Aerodyn., 96, 2217–2227.
Carassale, L., and Brunenghi, M. M. (2011). “Statistical analysis of wind-induced pressure fields: A methodological perspective.” J. Wind Eng. Ind. Aerodyn., 99, 700–710.
Chen, X., and Huang, G. (2009). “Evaluation of peak resultant response for wind-excited tall buildings.” Eng. Struct., 31(4), 858–868.
Cheng, P. W., van Bussel, G. J. W., van Kuik, G. A. M., and Vugts, J. H. (2003). “Reliability-based design methods to determine the extreme response distribution of offshore wind turbines.” Wind Energy, 6(1), 1–22.
Choi, M., and Sweetman, B. (2010). “The Hermite moment model for highly skewed response with application to tension leg platforms.” J. Offshore Mech. Arct. Eng., 132(2), 021602.
Ciampoli, M., and Petrini, F. (2012). “Performance-based Aeolian risk assessment and reduction for tall buildings.” Probab. Eng. Mech., 28, 75–84.
Davenport, A. G. (1964). “Note on the distribution of the largest value of a random function with application to gust loading.” Proc.–Inst. Civ. Eng., 28(2), 187–196.
Gioffre, M., Gusella, V., and Grigoriu, M. (2001). “Non-Gaussian wind pressure on prismatic buildings. I: Stochastic field.” J. Struct. Eng., 127(9), 981–989.
Grigoriu, M. (1984). “Crossing of non-Gaussian translation process.” J. Eng. Mech., 110(4), 610–620.
Gumbel, E. J. (1958). Statistical of extremes, Columbia University Press, New York.
Gurley, K. R., Tognarelli, M. A., and Kareem, A. (1997). “Analysis and simulation tools for wind engineering.” Probab. Eng. Mech., 12(1), 9–31.
Hastie, T., Tibshirani, R., and Friedman, J. H. (2009). The elements of statistical learning, 2nd Ed., Springer, New York.
Huang, M. F., Chan, C. M., Lou, W. J., and Kwok, K. C. S. (2012a). “Statistical extremes and peak factors in wind-induced vibration of tall buildings.” J. Zhejiang Univ., Sci., A, 13(1), 18–32.
Huang, M. F., Lou, W. J., Chan, C. M., and Bao, S. (2012b). “Peak factors of non-Gaussian wind forces on a complex-shaped tall building.” J. Struct. Des. Tall Spec. Build., in press.
Ishikawa, T. (2004). “A study on wind load estimation method considering dynamic effect for overhead transmission lines.” Doctoral thesis, Waseda Univ., Tokyo (in Japanese).
Kareem, A., and Zhao, J. (1994). “Analysis of non-Gaussian surge response of tension leg platforms under wind loads.” J. Offshore Mech. Arct. Eng, 116(3), 137–144.
Kwon, D., and Kareem, A. (2011). “Peak factors for non-Gaussian load effects revisited.” J. Struct. Eng., 137(12), 1611–1619.
Lutes, L. D. (2008). “Joint distribution of peaks and valleys in a stochastic process.” Probab. Eng. Mech., 23, 254–266.
Melbourne, W. H. (1980). “Comparison of measurements on the CAARC standard tall building model in simulated model wind flows.” J. Wind Eng. Ind. Aerodyn., 6(1–2), 73–88.
Michaelov, G., Sarkani, S., and Lutes, L. D. (1996). “Fractile levels for non-stationary extreme response of linear structures.” J. Struct. Saf., 18(1), 11–31.
Middleton, D. (1960). An introduction to statistical communication theory, McGraw Hill, New York.
Newland, D. E. (1984). Random vibration and spectral analysis, Wiley, New York.
Ochi, M. K. (1998). “Probability distribution of peaks and troughs of non-Gaussian random process.” Probab. Eng. Mech., 13(4), 291–298.
Pillai, S. N., and Tamura, Y. (2009). “Generalized peak factor and its application to stationary random processes in wind engineering applications.” J. Wind Eng., 6(1), 1–10.
Rice, S. O. (1954). “Mathematical analysis of random noise.” Chapter 4, Select papers on noise and stochastic processes, N. Wax, ed., Dover, New York.
Sadek, F., and Simiu, E. (2002). “Peak non-Gaussian wind effects for database-assisted low-rise building design.” J. Eng. Mech., 128(5), 530–539.
Socquet-Juglard, H., Dysthe, K., Trulsen, K., Krogstad, H., and Liu, J. (2005). “Probability distributions of surface gravity waves during spectral changes.” J. Fluid Mech., 542, 195–216.
Tayfun, M. A. (1994). “Distributions of envelope and phase in weakly nonlinear random waves.” J. Eng. Mech., 120(5), 1009–1025.
Tieleman, H. W., Elsayed, M. A. K., Ge, Z., and Hajj, M. R. (2008). “Extreme value distributions for peak pressure and load coefficients.” J. Wind Eng. Ind. Aerodyn., 96(6–7), 1111–1123.
Tieleman, H. W., Ge, Z., and Hajj, M. R. (2007). “Theoretically estimated peak wind loads.” J. Wind Eng. Ind. Aerodyn., 95(2), 113–132.
Tognarelli, M. A., Zhao, J., and Kareem, A. (1997). “Equivalent statistical cubicization for system and forcing nonlinearities.” J. Eng. Mech., 123(8), 890–893.
Winterstein, S. R. (1988). “Nonlinear vibration models for extremes and fatigue.” J. Eng. Mech., 114(10), 1772–1790.
Winterstein, S. R., and Kashef, T. (2000). “Moment-based load and response models with wind engineering applications.” J. Sol. Energy Eng., 122(3), 122–128.
Winterstein, S. R., Ude, T. C., and Kleiven, G. (1994). “Springing and slow-drift responses: Predicted extremes and fatigue vs. simulation.” Proc., BOSS-94, Vol. 3, Massachusetts Institute of Technology, Cambridge, MA, 1–15.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Jun 19, 2012
Accepted: Feb 26, 2013
Published online: Feb 28, 2013
Published in print: Dec 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.