Analytical and Numerical Analyses of Partially Submerged Membranes
Publication: Journal of Engineering Mechanics
Volume 139, Issue 12
Abstract
The presented work investigates the deformed shape and tensile state of inflated membranes partially submerged in fluid. The understanding of membrane behavior is of primary concern in marine-related problems, as well as other fields. This analysis is motivated by the flexible seals of surface effect ships and inflatable pontoons. A new exact solution for the governing differential equations and a new finite-element approach are developed. The stiffness influence coefficient method is used to derive the stiffness of the curved elements in which the end nodal displacements define the degrees of freedom. The methods of analysis are shown to provide two-dimensional results that are in excellent agreement in terms of both deformed geometry and membrane tension.
Get full access to this article
View all available purchase options and get full access to this article.
References
Ahmad, S., Irons, B. M., and Zienkiewicz, O. C. (1970). “Analysis of thick and thin shell structures by curved finite elements.” Int. J. Numer. Methods Eng., 2(3), 419–451.
Bushnell, D. (1984). “Computerized analysis of shells-governing equations.” J. Comp. Struct., 18(3), 471–536.
Demiroz, A. (2005). “Prediction of large deformation behavior of fabric using Galerkin finite element method.” Text. Res. J., 75(9), 662–669.
Doctors, L. J. (1992). “On the use of pressure distributions to model the hydrodynamics of air-cushion vehicles and surface-effect ships.” High Performance Marine Vehicle Conf. and Exhibit, Wiley, Hoboken, NJ, 105(2), 69–89.
Doctors, L. J., and McKesson, C. B. (2006). “The resistance components of a surface-effect ship.” Proc., 26th Symp. on Naval Hydrodynamics, Strategic Analysis Inc., Arlington, VA, 1–15.
Gallagher, R. H. (1975). “Finite element analysis fundamental.” Chapter 5, Variational methods of element formulation, Prentice Hall, Upper Saddle River, NJ, 126–132.
Ghavanloo, E., and Daneshmand, F. (2009). “The equilibrium shapes of air-filled heavy membrane tubes resting on inclined planes.” Mech. Res. Commun., 36(3), 405–412.
Graham, T. A., Sullivan, P. A., and Hinchey, M. J. (1985). “Skirt material effects on air cushion dynamic stability.” J. Aircraft, 22(2), 101–108.
Gruttmann, F., and Taylor, R. L. (1992). “Theory and finite element formulation of rubberlike membrane shells using principal stresses.” Int. J. Numer. Methods Eng., 35(5), 1111–1126.
Hawthorne, W. R. (1961). “The early development of the Dracone flexible barge.” Proc. Inst. Mech. Eng., 175(1), 52–83.
Holzapfel, G. A., Eberlein, R., Wriggers, P., and Weizsacker, H. W. (1996). “Large strain analysis of soft biological membranes: Formulation and finite element analysis.” Comput. Methods Appl. Mech. Eng., 132(1–2), 45–61.
Hughes, T. J. R., and Carnoy, E. (1983). “Nonlinear finite element shell formulation accounting for large membrane strains.” Comput. Methods Appl. Mech. Eng., 39(1), 69–82.
Hughes, T. J. R., and Liu, W. K. (1981a). “Nonlinear finite element analysis of shells: Part I. Three-dimensional shells.” Comput. Methods Appl. Mech. Eng., 26(3), 331–362.
Hughes, T. J. R., and Liu, W. K. (1981b). “Nonlinear finite element analysis of shells: Part II. Two-dimensional shells.” Comput. Methods Appl. Mech. Eng., 27(2), 167–181.
Hughes, T. J. R., Liu, W. K., and Levit, I. (1981). “Nonlinear dynamic finite element analysis of shells.” Proc., U.S. Workshop on Nonlinear Finite Element Analysis in Structural Mechanics, W. Wunderlich, E. Stein and K. J. Bathe, eds., Springer, Berlin, 151–161.
Ibrahimbegovic, A., Taylor, R. L., and Wilson, E. L. (1990). “A robust quadrilateral membrane finite element with drilling degrees of freedom.” Int. J. Numer. Methods Eng., 30(3), 445–457.
Iura, M., and Atluri, S. N. (1992). “Formulation of a membrane finite element with drilling degrees of freedom.” Comput. Mech., 9(6), 417–428.
Oden, J. T., and Sato, T. (1967). “Finite strains and displacements of elastic membranes by the finite element method.” Int. J. Solids Struct., 3(4), 471–488.
Plaut, R. H., and Suherman, S. (1998). “Two-dimensional analysis of geosynthetic tubes.” Acta Mech., 129(3–4), 207–218.
Rivlin, R. S. (1960). “Some topics in finite elasticity.” Proc., 1st Symp. on Naval Structural Mechanics, Pergamon Press, London, 169–198.
Szyszkowski, W., and Glockner, P. C. (1987). “On the statics of large scale cylindrical floating membrane containers.” Int. J. Non-linear Mech., 22(4), 275–282.
Wilson, R. A., Wells, S. M., and Heber, C. E. (1979). “Powering predictions for surface effect ships based on model results.” J. Hydronautics, 13(4), 113–119.
Wu, C. H. (1971). “On the contact problems of inflated cylindrical membranes with a life raft as an example.” J. Appl. Mech., 38(3), 615–622.
Zhao, R. (1995). “A complete linear theory for a two dimensional floating and liquid-filled membrane structure in waves.” J. Fluids Struct., 9(8), 937–956.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Dec 27, 2011
Accepted: Feb 22, 2013
Published online: Feb 25, 2013
Published in print: Dec 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.