Lifetime Extension of a Realistic Model of an In-Service Bridge through a Response Modification Approach
Publication: Journal of Engineering Mechanics
Volume 139, Issue 12
Abstract
Many highway bridges in the United States are reaching their intended design lives and are in need of attention. To avoid replacing these bridges simultaneously, methodologies to safely extend their lives are important to help avoid high replacement costs and to allow for bridge replacement to occur over a longer time window. This paper expands an approach to extend the fatigue life of vulnerable steel bridges through a response modification (RM) apparatus, consisting of a mechanical amplifier and a RM device, which provide efficient supplemental stiffness and damping to the bridge. Because of the relatively small deflections encountered under typical service loads, the use of a mechanical amplifier allows for a more efficient and less intrusive apparatus to provide the required RM forces imparted to the bridge for increased bridge life. This paper presents a parameter study exploring the flexibility of the elements in the RM apparatus, the length of the apparatus, and the characteristics of the RM device. The analyses also add superstructure damping and other model improvements to a comprehensive numerical model of a realistic in-service bridge. The paper carries out dynamic analyses in the frequency domain to ensure the robustness of the RM apparatuses for various loading frequencies. The most important characteristic of the RM apparatus is found to be the cross-sectional area of the members. Additionally, the parameter study showed that a smaller apparatus is most cost effective. Finally, the dynamic analyses showed that the use of a semiactive device may be beneficial to the effectiveness of the RM approach.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors thank the Center for Transportation Studies at the University of Minnesota for financially supporting this work through the Response Modification for Enhanced Operation and Safety of Bridges Project and the Innovative Technologies for Lifetime Extension of an Aging Inventory of Vulnerable Bridges Project.
References
AASHTO. (2008). Manual for bridge evaluation, 1st Ed., Washington, DC.
AASHTO. (2010). LRFD bridge design specifications, 5th Ed., Washington, DC.
Akesson, B. (2008). Understanding bridge collapses, Taylor & Francis, London.
Federal Highway Administration (FHWA). (2010). “Deficient bridges by state and highway system.” 〈http://www.fhwa.dot.gov/bridge/nbi/defbr10.cfm#c〉 (Feb. 9, 2011).
Fisher, J. W., et al. (2001). “Hoan Bridge forensic investigation failure analysis final report.” Final Rep., Wisconsin Dept. of Transportation and Federal Highway Administration (FHWA), Washington, DC.
Gastineau, A. J., Wojtkiewicz, S. F., and Schultz, A. E. (2011). “Safe life extension of bridges using structural response modification techniques.” Proc., of the 8th Int. Conf. on Structural Dynamics, European Association of Structural Dynamics (EASD), Leuven, Belgium, 1201–1207.
Gastineau, A. J., Wojtkiewicz, S. F., and Schultz, A. E. (2012). “Response modification approach for safe extension of bridge life.” J. Bridge Eng., 17(4), 728–732.
Hao, S. (2010). “I-35W Bridge collapse.” J. Bridge Eng., 15(5), 608–614.
Harris, N. K., O’Brien, E. J., and González, A. (2007). “Reduction of bridge dynamic amplification through adjustment of vehicle suspension damping.” J. Sound Vib., 302(3), 471–485.
Hilber, H. M., Hughes, T. J. R., and Taylor, R. L. (1977). “Improved numerical dissipation for time integration algorithms in structural dynamics.” Earthquake Eng. Struct. Dyn., 5(3), 283–292.
Housner, G. W., et al. (1997). “Structural control: Past, present, and future.” J. Eng. Mech., 123(9), 897–971.
Liao, M., Okazaki, T., Ballarini, R., Schultz, A. E., and Galambos, T. V. (2011). “Nonlinear finite-element analysis of critical gusset plates in the I-35W bridge in Minnesota.” J. Struct. Eng., 137(1), 59–68.
Lichtenstein, A. (1993). “The Silver Bridge collapse recounted.” J. Perform. Constr. Facil., 7(4), 249–261.
Lindberg, A. Y., and Schultz, A. E. (2007). “Incorporation of fatigue detail classification of steel bridges into the Minnesota Department of Transportation database.” Final Rep. 2007-22, Minnesota Dept. of Transportation, St. Paul, MN.
MATLAB 2011a [Computer software]. Natick, MA, MathWorks.
Miller, R., Masri, S., Dehghanyar, T., and Caughey, T. (1988). “Active vibration control of large structures.” J. Eng. Mech., 114(9), 1542–1570.
Patten, W. N., Sun, J., Li, G., Kuehn, J., and Song, G. (1999). “Field test of an intelligent stiffener for bridges at the I-35 Walnut Creek Bridge.” Earthquake Eng. Struct. Dyn., 28(2), 109–126.
Richland Engineering Limited (REL). (1997). “Truss gusset plate failure, analysis, repair and retrofit: Interstate 90 bridge over Grand River.” Final Rep. 96073, REL, Mansfield, OH.
SAP2000 14.2.3 [Computer software]. Berkeley, CA, Computers and Structures.
Schultz, A. E., and Thompson, D. J. (2010). “Development of an advanced structural monitoring system.” Final Rep. 2010-39, Minnesota DOT, St. Paul, MN.
Soong, T. T., and Spencer, B. F., Jr. (2002). “Supplemental energy dissipation: State-of-the-art and state-of-the-practice.” Eng. Struct., 24(3), 243–259.
Spencer, B. F., and Nagarajaiah, S. (2003). “State of the art of structural control.” J. Struct. Eng., 129(7), 845–856.
Yao, J. T. P. (1972). “Concept of structural control.” J. Struct. Div., 98(7), 1567–1574.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Oct 28, 2011
Accepted: Feb 22, 2013
Published online: Feb 25, 2013
Published in print: Dec 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.