Amendment to the Galin Plane Elastoplastic Solution
Publication: Journal of Engineering Mechanics
Volume 139, Issue 11
Abstract
The literature provides an analytical solution to the state of stress in an infinite plate with a circular notch and biaxial tensile stress. This solution requires that a plastic region fully surrounds the notch. In an existing paper, a minor reshaping mistake at the very end of the derivation occurred that is corrected herein. The purpose of this work is mainly to document literature and to provide an amendment to the analytical solution. Numerical simulations using finite elements prove the validity of the corrected equation.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors express their gratitude to the reviewers for their clear and helpful comments. C. C. Celigoj thanks Prof. A. K. Belyaev (Institute of Problems of Mechanical Engineering, Russian Academy of Sciences, St. Petersburg, Russia) for making available the original paper of Galin.
References
Annin, B. D., and Cherepanov, G. P. (1988). 1983 Uprugo-plasticheskaja zadacha [Elastic plastic problems], Nauka,Novosibirsk, Russia (in Russian).
Bykovtsev, G. I., and Tsvetkov, Y. D. (1987). “The two-dimensional loading problem of an elasto-plastic plane weakened by a hole.” J. Appl. Math. Mech., 51(2), 244–250.
Chakrabarty, J. (2006). Theory of plasticity, 3rd Ed., Elsevier Butterworth-Heinemann, Amsterdam, Netherlands.
Cherepanov, G. P. (1963). “On a method of solving the elasto-plastic problem.” J. Appl. Math. Mech., 27(3), 644–655.
Detournay, E. (1986). “An approximate statical solution of the elastoplastic interface for the problem of Galin with a cohesive-frictional material.” Int. J. Solids Struct., 22(12), 1435–1454.
Detournay, E., and Fairhurst, C. (1987). “Two-dimensional elastoplastic analysis of a long, cylindrical cavity under non-hydrostatic loading.” Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 24(4), 197–211.
Francis, P. H., and Rim, K. (1967). “A method of solving certain plane problems of contained elasto-plasticity.” SIAM J. Appl. Math., 15(4), 842–855.
Galin, L. A. (1946). “The plane elastoplastic problem: Plastic regions near round holes in plates and beams.” J. Appl. Math. Mech., 10(3), 367–386.
Imamutdinov, D. I., and Chanyshev, A. I. (1988). “Elastoplastic problem of an extended cylindrical working.” J. Min. Sci., 24(3), 199–207.
Ivanov, G. M., and Semenikhina, A. N. (1973). “An elastic-plastic problem for an isotropic solid weakened by two circular excavations.” J. Appl. Math. Mech., 9(3), 131–133.
Ivlev, D. D. (1957). “On the determination of displacements in the problem of L. A. Galin.” J. Appl. Math. Mech., 21(5), 716–718.
Kachanov, L. M. (1971). Foundations of the theory of plasticity, 2nd Ed., North-Holland, Amsterdam, Netherlands.
Kerchman, V. I., and Erlikhman, F. M. (1988). “A variational method of solving an elastic-plastic problem for a body with a circular hole.” J. Appl. Math. Mech., 52(1), 126–132.
Kuznetsov, V. V. (1972). “Stress concentration near an elliptical hole in an elastic-plastic plate.” J. Appl. Math. Mech., 8(5), 85–91.
Lazarev, M. I., and Lazarev, P. I. (1976). “Solution of a plane elastoplastic problem for a plate with a hole.” J. Appl. Math. Mech., 12(9), 925–929.
Leitman, M. J., and Villaggio, P. (2009). “Plastic zone around circular holes.” J. Eng. Mech., 135(12), 1467–1471.
Leonov, M. I., and Nisnevich, E. B. (1983). “Inverse problem of plane plasticity theory.” J. Appl. Math. Mech., 47(1), 126–129.
Lozhkin, V. N. (2001). “A generalization of Galin’s problem in the theory of ideal plasticity.” J. Math. Sci., 103(3), 363–367.
MATLAB 7.10 [Computer software]. Natick, MA, MathWorks.
Mirsalimov, V. M. (1987). Neodnomernye uprugoplasticheskie zadachi [Non-one-dimensional elasto-plastic problems], Nauka, Moscow (in Russian).
Ostrosablin, N. I. (1984). Plane elastoplastic distribution of stresses near round holes, Nauka, Novosibirsk, Russia.
Parasyuk, O. S. (1948). “An elastic-plastic problem with a non-biharmonic plastic state.” J. Appl. Math. Mech., 13, 367–370.
Perlin, N. I. (1960). “Elastoplastic stress distribution round holes.” Tr. Mosk. Fiz.-Tekh. Inst., 5, 30–40.
Prager, W., and Hodge, P. G. (1951). Theory of perfectly plastic solids, Wiley, New York.
Savin, G. N. (1961). 1951 Kontsentratsiya napryazhenii okolo otverstii [Stress concentration around holes]. Gostektheoretizdat, Moscow, Leningrad (in Russian).
Sokolovskij, V. V. (1955). Theorie der Plastizität [1950 Teorija plasticnosti]. Government Publishing House for Technical-Theoretical Works, Moscow, Leningrad (in German).
Thacker, R. P. (1994). “Elastic-plastic analysis around a circular hole stress concentration.” MSC World Users’ Conf. Proc., MacNeal-Schwendler Corp., Los Angeles 〈http://www.mscsoftware.com/support/library/conf/wuc94〉 (Apr. 4, 2011).
Tokar, G. (1990). “Generalization of Galin’s problem to frictional materials and discontinuous stress fields.” Int. J. Solids Struct., 26(2), 129–147.
Yarushina, V. M., Dabrowski, M., and Podladchikov, Y. Y. (2010). “An analytical benchmark with combined pressure and shear loading for elastoplastic numerical models.” Geochem. Geophys. Geosyst., 11(8), Q08006.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Jul 11, 2011
Accepted: Feb 13, 2013
Published online: Feb 15, 2013
Published in print: Nov 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.