Role of Covariance in Continuum Damage Mechanics
Publication: Journal of Engineering Mechanics
Volume 139, Issue 11
Abstract
The subject of objective rates in continuum damage mechanics is under consideration. It is shown that by changing the definition of the objective rate in constitutive theory, one obtains different material behavior and different final fracture modes as causes of intrinsic microdamage evolution. Theoretical considerations and a numerical example include the comparison of two special cases of objective rates for which the symmetric part of the spatial velocity gradient defines a true rate of the assumed strain rates, namely Lie and Logarithmic. The problem is described in the framework of the recently proposed Perzyna-type viscoplasticity, including an anisotropic damage description; nevertheless, final conclusions are general.
Get full access to this article
View all available purchase options and get full access to this article.
References
ABAQUS. (2012). Abaqus Version 6.12 Theory Manual, SIMULIA Worldwide Headquarters, Providence, RI.
Bruhns, O., Xiao, H., and Meyers, A. (1999). “Self-consistent eulerian rate type elasto-plasticity models based upon the logarithmic stress rate.” Int. J. Plast., 15(5), 479–520.
Bruhns, O., Xiao, H., and Meyers, A. (2001). “Large simple shear and torsion problems in kinematic hardening elasto-plasticity with logarithmic rate.” Int. J. Solids Struct., 38(48–49), 8701–8722.
Dienes, J. (1979). “On the analysis of rotation and stress rate in deforming bodies.” Acta Mech., 32(4), 217–232.
Dornowski, W. (1999). “Influence of finite deformations on the growth mechanism of microvoids contained in structural metals.” Arch. Mech., 51(1), 71–86.
Duszek-Perzyna, M., and Perzyna, P. (1994). “Material instabilities: Theory and applications.”Analysis of the influence of different effects on criteria for adiabatic shear band localization in inelastic solids, Vol. 50, ASME, New York.
Glema, A., Łodygowski, T., and Sumelka, W. (2010). “Selected aspects of using different objective rates in continuum damage mechanics based on the theory of viscoplasticity for an anisotropic solids.” Proc., 37th Solid Mechanics Conf., Institute of Fundamental Technological Research, Polish Academy of Sciences, Warsaw, Poland, 134–135.
Glema, A., Łodygowski, T., Sumelka, W., and Perzyna, P. (2009). “The numerical analysis of the intrinsic anisotropic microdamage evolution in elasto-viscoplastic solids.” Int. J. Damage Mech., 18(3), 205–231.
Green, A., and Naghdi, P. (1965). “A general theory of an elastic–plastic continuum.” Arch. Ration. Mech. Anal., 18(4), 251–281.
Hill, R. (1978). “Aspects of invariance in solid mechanics.” Adv. Appl. Mech., 18, 1–75.
Holzapfel, G. (2000). Nonlinear solid mechanics: A continuum approach for engineering, Wiley, New York.
Kollmann, F., and Hackenberg, H.-P. (1993). “On the algebra of two-point tensors on manifolds with applications in nonlinear solid mechanics.” J. Appl. Math. Mech., 73(11), 307–314.
Lehmann, T. (1972). “Anisotrope plastische Formänderungen.” Romanian J. Tech. Sci. Appl. Mech, 17, 1077–1086.
Marsden, J., and Hughes, T. (1983). Mathematical foundations of elasticity, Prentice Hall, Englewood Cliffs, NJ.
Meyers, A., Xiao, H., and Bruhns, O. (2006). “Choice of objective rate in single parameter hypoelastic deformation cycles.” Comp. Struct., 84(17–18), 1134–1140.
Nagtegaal, J. C., and de Jong, J. E. (1982). “Some aspects of non-isotropic work-hardening in finite strain plasticity.” Proc., Workshop on Plasticity of Metals at Finite Strain: Theory, Experiment and Computation, E. H. Lee and R. L. Malett, eds., Stanford Univ., Stanford, CA, 65–102.
Nemat-Nasser, S., and Guo, W.-G. (2005). “Thermomechanical response of HSLA-65 steel plates: Experiments and modeling.” Mech. Mater., 37(2–3), 379–405.
Nemes, J., and Eftis, J. (1993). “Constitutive modelling of the dynamic fracture of smooth tensile bars.” Int. J. Plast., 9(2), 243–270.
Łodygowski, T. (1996). “Theoretical and numerical aspects of plastic strain localization.” D.Sc. thesis, Vol. 312, Publishing House of Poznan Univ. of Technology, Poznań, Poland.
Łodygowski, T., Glema, A., and Sumelka, W. (2008). “Anisotropy induced by evolution of microstructure in ductile material.” Proc., 8th World Congress on Computational Mechanics (WCCM8), 5th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008), Artes Gráficas Torres S.L., Barcelona, Spain.
Łodygowski, T., and Perzyna, P. (1997a). “Localized fracture of inelastic polycrystalline solids under dynamic loading process.” Int. J. Damage Mech., 6(4), 364–407.
Łodygowski, T., and Perzyna, P. (1997b). “Numerical modelling of localized fracture of inelastic solids in dynamic loading process.” Int. J. Numer. Methods Eng., 40(22), 4137–4158.
Oldroyd, J. (1950). “On the formulation of rheological equations of state.” Proc. R. Soc. A 200(1063), 523–541.
Perzyna, P. (1963). “The constitutive equations for rate sensitive plastic materials.” Q. Appl. Math., 20, 321–332.
Perzyna, P. (1966). “Fundamental problems in viscoplasticity.” Adv. Appl. Mech., 9, 243–377.
Perzyna, P. (1978). Termodynamika materiatów niesprężystych, PWN, Warsaw, Poland.
Perzyna, P. (1986a). “Constitutive modelling for brittle dynamic fracture in dissipative solids.” Arch. Mech., 38, 725–738.
Perzyna, P. (1986b). “Internal state variable description of dynamic fracture of ductile solids.” Int. J. Solids Struct., 22(7), 797–818.
Perzyna, P. (1994). “Instability phenomena and adiabatic shear band localization in thermoplastic flow process.” Acta Mech., 106(3–4), 173–205.
Perzyna, P. (1998). “Constitutive modelling of dissipative solids for localization and fracture.” Chap. 3, Localization and fracture phenomena in inelastic solids, P. Perzyna, ed., Springer, New York, 99–241.
Perzyna, P. (2005). “The thermodynamical theory of elasto-viscoplasticity.” Eng. Trans., 53(3), 235–316.
Perzyna, P. (2008). “The thermodynamical theory of elasto-viscoplasticity accounting for microshear banding and induced anisotropy effects.” Mechanics, 27(1), 25–42.
Raniecki, B., Nguyen, H., and Ziółkowski, A. (2008). “On the incremental plastic work and related aspects of invariance. II.” Acta Mech., 200(1–2), 79–109.
Rymarz, C. (1993). Mechanika ośrodków ciągtych, PWN, Warsaw, Poland (in Polish).
Shima, S., and Oyane, M. (1976). “Plasticity for porous solids.” Int. J. Mech. Sci., 18(6), 285–291.
Song, J.-H., Wang, H., and Belytschko, T. (2008). “A comparative study on finite element methods for dynamic fracture.” Comput. Mech., 42(2), 239–250.
Stumpf, H., and Hoppe, U. (1997). “The application of tensor algebra on manifolds to nonlinear continuum mechanics: Invited survey article.” J. Appl. Math. Mech., 77(5), 327–339.
Sumelka, W. (2009). The constitutive model of the anisotropy evolution for metals with microstructural defects, Publishing House of Poznan Univ. of Technology, Poznań, Poland.
Sumelka, W., and Łodygowski, T. (2010). “The influence of the initial microdamage anisotropy on macrodamage mode in dynamic tension of steel sheet.” Proc., 7th German–Greek–Polish Symp. on Recent Advances in Mechanics, PWG - Digital Printing House, Poznań, Poland, 111–112.
Sumelka, W., and Łodygowski, T. (2011). “The influence of the initial microdamage anisotropy on macrodamage mode during extremely fast thermomechanical processes.” Arch. Appl. Mech., 81(12), 1973–1992.
Xiao, H., Bruhns, O., and Meyers, A. (1997a). “Hypo-elasticity model based upon the logarithmic stress rate.” J. Elast., 47(1), 51–68.
Xiao, H., Bruhns, O., and Meyers, A. (1997b). “Logarithmic strain, logarithmic spin and logarithmic rare.” Acta Mech., 124(1–4), 89–105.
Xiao, H., Bruhns, O., and Meyers, A. (1998). “Strain rates and material spin.” J. Elast., 52(1), 1–41.
Xiao, H., Bruhns, O., and Meyers, A. (2006). “Elastoplasticity beyond small deformations.” Acta Mech., 182(1–2), 31–111.
Xiao, H., Bruhns, O., and Meyers, A. (2007). “Thermodynamic laws and consistent eulerian formulation of finite elastoplasticity with thermal effects.” J. Mech. Phys. Solids, 55(2), 338–365.
Zaremba, S. (1903). “Sur une forme perfectionée de la théorie de la relaxation.” Bull. Int. Acad. Sci. Cracovie, 594–614.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Nov 16, 2012
Accepted: Feb 4, 2013
Published online: Feb 6, 2013
Published in print: Nov 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.