Semianalytical Buckling Solution and Experimental Study of Variable–Cross Section Rods with Different Moduli
Publication: Journal of Engineering Mechanics
Volume 139, Issue 9
Abstract
Many civil-engineering materials and novel materials developed in recent years exhibit a property of different elastic moduli in tension and compression. One such material is graphene, a wonder material, which has the highest strength yet measured. However, the dominant failure of structures composed of this high-strength material is often attributed to buckling problems. Investigations on buckling problems for structures with different moduli are scarce. To address this new problem, the present paper develops a semianalytical method for the critical buckling loads of variable–cross section slender rods with different moduli. Based on the variational principle, a differential equation of the deflection of these structures is derived for the first time. By developing a nonlinear iterative program and using the variational iteration method, the critical buckling loads are obtained. Then, buckling tests and numerical simulation were conducted for slender rods made from graphite with different moduli. By comparing the semianalytical results with the laboratory tests and finite-element analysis results, the semianalytical model proposed in this paper was demonstrated to be accurate and reliable. The conclusion can be drawn that the characteristics of different moduli of materials have a significant influence on the buckling stability of structures. Therefore, it may lead to unsafe results if the classic theory is still adopted to determine the buckling loads of those rods composed of a material having different moduli. The proposed model could provide a novel approach for further investigation of nonlinear mechanical behavior for structures with different moduli.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
We acknowledge the support of the National Natural Science Foundation of China (11072143).
References
Ambartsumyan, S. A. (1986). Elasticity theory of different moduli. Trans. R. F. Wu and Y. Z. Zhang. China Railway, Beijing.
Bert, C. W. (1977). “Models for fibrous composites with different properties in tension and compression.” J. Eng. Mater. Technol., 99(4), 344–349.
Bert, C. W., and Ko, C. L. (1985). “Buckling of columns constructed of bimodular materials.” Int. J. Eng. Sci., 23(6), 641–657.
Bruno, D., Lato, S., and Sacco, E. (1994). “Nonlinear analysis of bimodular composite plates under compression.” Comput. Mech., 14(1), 28–37.
Considère, A. (1891). “Résistance des pieces comprimées.” Proc., Congrès Int. des Procédés de Construction, Libraire Polytechnique, Paris, 371–374.
Engesser, F. (1889). “Uber die knickfestigkeit gerader Stäbe.” Z. Archit. Ing., 35(4), 455–562 (in German).
Exadaktylos, G. E., Vardoulakis, I., and Kourkoulis, S. K. (2001). “Influence of nonlinearity and double elasticity on flexure of rock beams—II. Characterisation of Dionysos marble.” Int. J. Solids Struct., 38(22–23), 4119–4145.
Geim, A. K. (2009). “Graphene: Status and prospects.” Science, 324(5934), 1530–1534.
Gilbert, G. N. J. (1961). “Stress/strain properties of cast iron and Poisson’s ratio in tension and compression.” J. Brit. Cast Iron Res. Assoc., 9(10), 347–363.
Gong, X. N., Wang, Q. T., and Luo, X. (1994). “Round hole expansion problem of bimodulus materials.” Chin. J. Appl. Mech., 11(4), 127–132.
Haimson, B. C., and Tharp, T. M. (1974). “Stresses around borehole in bilinear elastic rock.” J. Soc. Petrol. Eng., 14(2), 145–151.
He, J. H. (2007). “Variational iteration method—Some recent results and new interpretations.” J. Comput. Appl. Math., 207(1), 3–17.
He, X. T., Zheng, Z. L., and Sun, J. Y. (2009). “Convergence analysis of a finite element method based on different moduli in tension and compression.” Int. J. Solids Struct., 46(20), 3734–3740.
Jones, R. M. (1977). “Stress-strain relations for materials with different moduli in tension and compression.” AIAA J., 15(1), 16–23.
Kratsh, K. M., Schutzler, J. C., and Eitman, D. S. (1972). “Carbon-carbon 3-D orthogonal material behaviour.” Proc., 13th Structures, Structural Dynamics, and Materials Conf., American Institute of Aeronautics and Astronautics, New York, 10–14.
Lan, T., Lin, P. D., and Chen, L. W. (1993). “Thermal buckling of bimodular sandwich beams.” Compos. Struct., 25(1-4), 345–352.
Leal, A. (2009). “Compressive strength analysis for high performance fibres with different modulus in tension and compression.” J. Compos. Mater., 43(6), 661–674.
Patel, B. P. (2004). “Thermo-flexural analysis of thick laminates of bimodulus composite materials.” Compos. Struct., 63(1), 11–20.
Rafiee, M. A., Rafiee, J., Yu, Z. Z., and Koratkar, N. (2009). “Buckling resistant graphene nanocomposites.” Appl. Phys. Lett., 95(22), 223103.
Shanley, F. R. (1946). “The column paradox.” J. Aeronaut. Sci., 13(12), 261.
Tseng, Y. P., and Jiang, Y. C. (1998). “Stress analysis of bimodular laminates using hybrid stress plate element.” Int. J. Solids Struct., 35(17), 2025–2028.
Tsoukleri, G., et al. (2009). “Subjecting a graphene monolayer to tension and compression.” Small, 5(21), 2397–2402.
Vijayakumar, K., and Ashoka, J. G. (1990). “A bilinear constitutive model for isotropic bimodulus materials.” J. Eng. Mater. Technol., 112(3), 372–379.
Yang, H. T. and Zhu, Y. L. (2006). “Solving elasticity problems with bi-modulus via a smoothing technique.” Chin. J. Comput. Mech., 23(1), 19–23.
Yao, W. J., and Ye, Z. (2004a). “Analytical solution of bending-compression column using different tension-compression modulus.” J. Appl. Math. Mech., 25(9), 901–909.
Yao, W. J., and Ye, Z. (2004b). “Analytical solution for bending beam subject to later force with different modulus.” J. Appl. Math. Mech., 25(10), 1014–1022.
Yao, W. J., and Ye, Z. (2006). “Internal forces for statically indeterminate structures having different moduli in tension and compression.” J. Eng. Mech., 132(7), 739–746.
Yao, W. J., Zhang, C. H., and Jiang, X. F. (2006). “Nonlinear mechanical behaviour of combined members with different moduli.” Int. J. Nonlinear Sci. Numer. Simul., 7(2), 233–238.
Zhou, J. K., Wu, S. X., Zhao, L. H., and Chen, H. Q. (2005). “Experimental study on fully-graded concrete in static and dynamic states based on the different modulus elasticity theory.” Chin. J. Hehai Univ., 33(1), 94–98.
Zinno, R., and Greco, F. (2001). “Damage evolution in bimodular laminated composites under cyclic loading.” Compos. Struct., 53(4), 381–402.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Aug 29, 2011
Accepted: May 13, 2012
Published online: May 16, 2012
Published in print: Sep 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.