Reliability-Based Design Optimization of Uncertain Stochastic Systems: Gradient-Based Scheme
Publication: Journal of Engineering Mechanics
Volume 138, Issue 1
Abstract
A method to carry out reliability-based optimization of uncertain structural systems under stochastic excitation is presented in this paper. The approach is based on a nonlinear interior point algorithm and a line search strategy. The associated reliability problems to be solved during the optimization process are high-dimensional (thousands or more random variables). An advanced Monte Carlo simulation is adopted for the purpose of estimating the corresponding failure probabilities. The gradients of the failure probability functions needed during the design process are estimated by an approach based on the local behavior of the normalized demand functions that define the failure domains. Numerical results show that only a small number of reliability estimates has to be performed during the entire design process. By construction, the design scheme is monotonically convergent; that is, it generates a sequence of steadily improved feasible designs. Example problems that consider a resistant element of a shear building model under ground motion and a nonlinear 11-story building model under earthquake excitation are presented to illustrate the effectiveness and feasibility of the approach reported in this paper.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was partially supported by CONICYT under Grant No. UNSPECIFIED1110061 and the Austrian Research Council (FWF) under Project No. UNSPECIFIEDP20251-N13. This support is gratefully acknowledged by the writers.
References
Alexandrov, N., Dennis, J., Jr., Lewis, R., and Torczon, V. (1998). “A trust-region framework for managing the use of approximation models in optimization.” Struct. Multidiscip. Optim., 15(1), 16–23.
Au, S., and Beck, J. (2001). “Estimation of small failure probabilities in high dimensions by subset simulation.” Prob. Eng. Mech., 16(4), 263–277.
Bathe, K. (1996). Finite element procedures, Prentice Hall, Upper Saddle River, NJ.
Beck, J. and Au, S., and (2005). “Reliability of dynamic systems using stochastic simulation.” Structural Dynamics EURODYN 2005—Proc., 6th Int. Conf. on Structural Dynamics, Vol. 1, C. Soize and G. Schuëller, eds., Millpress, Rotterdam, Netherlands, 23–30.
Beck, J., Chan, E., Irfanoglu, A., and Papadimitriou, C. (1999). “Multi-criteria optimal structural design under uncertainty.” Earthquake Eng. Struct. Dyn., 28(7), 741–761.
Bonnans, J. F., Gilbert, J., Lemaréchal, C., and Sagastizábal, C. (2003). Numerical optimization, Springer-Verlag, Berlin.
Ching, J., and Hsieh, Y. (2007). “Local estimation of failure probability function and its confidence interval with maximum entropy principle.” Prob. Eng. Mech., 22(1), 39–49.
Clough, R., and Penzien, J. (1975). Dynamics of structures, McGraw-Hill, New York.
Gasser, M., and Schuëller, G. (1997). “Reliability-based optimization of structural systems.” Math. Meth. Oper. Res., 46(3), 287–307.
Haftka, R., and Gürdal, Z. (1992). Elements of structural optimization, 3rd Ed., Kluwer, Dordrecht, Netherlands.
Herskovits, J., and Santos, G. (1997). “On the computer implementation of feasible direction interior point algorithms for nonlinear optimization.” Struct. Optim., 14(2–3), 165–172.
Jensen, H., and Catalan, M. (2007). “On the effects of non-linear elements in the reliability-based optimal design of stochastic dynamical systems.” Int. J. Non-linear Mech., 42(5), 802–816.
Jensen, H., Valdebenito, M., and Schuëller, G. (2008). “An efficient reliability-based optimization scheme for uncertain linear systems subject to general Gaussian excitation.” Comput. Methods Appl. Mech. Eng., 198(1), 72–87.
Jensen, H., Valdebenito, M., Schuëller, G., and Kusanovic, D. (2009). “Reliability-based optimization of stochastic systems using line search.” Comput. Methods Appl. Mech. Eng., 198(49–52), 3915–3924.
Kanda, J., and Ellingwood, B. (1991). “Formulation of load factors based on optimum reliability.” Struct. Saf., 9(3), 197–210.
Katafygiotis, L., and Cheung, S. (2007). “Application of spherical subset simulation method and auxiliary domain method on a benchmark reliability study.” Struct. Saf., 29(3), 194–207.
Katafygiotis, L., and Wang, J. (2009). “Reliability analysis of wind-excited structures using domain decomposition method and line sampling.” Struct. Eng. Mech., 32(1), 37–51.
Koutsourelakis, P., Pradlwarter, H., and Schuëller, G. (2004). “Reliability of structures in high dimensions, part I: Algorithms and applications.” Prob. Eng. Mech., 19(4), 409–417.
Kushner, H., and Yin, G. (2003). Stochastic approximation and recursive algorithms and applications, Springer, New York.
Lind, N. (1976). “Approximate analysis and economics of structures.” J. Struct. Div., Am. Soc. Civ. Eng., 102(6), 1177–1196.
Murthy, P., and Subramanian, G. (1968). “Minimum weight analysis based on structural reliability.” AIAA J., 6(10), 2037–2039.
Nocedal, J., and Wright, S. (1999). Numerical optimization, Springer-Verlag, New York.
Papadrakakis, M., and Lagaros, N. (2002). “Reliability-based structural optimization using neural networks and Monte Carlo simulation.” Comput. Methods Appl. Mech. Eng., 191(32), 3491–3507.
Pellissetti, M. F., Schuëller, G. I., Pradlwarter, H. J., Calvi, A., Fransen, S., and Klein, M. (2006). “Reliability analysis of spacecraft structures under static and dynamic loading.” Comput. Struct., 84(21), 1313–1325.
Pradlwarter, H. J., and Schuëller, G. I. (1993). “Equivalent linearization—A suitable tool for analyzing MDOF-systems.” Probab. Eng. Mech., 8(2), 115–126.
Schuëller, G., Pradlwarter, H., and Koutsourelakis, P. (2004). “A critical appraisal of reliability estimation procedures for high dimensions.” Probab. Eng. Mech., 19(4), 463–474.
Taflanidis, A. and Beck, J. (2008). “Stochastic subset optimization for optimal reliability problems.” Probab. Eng. Mech., 23(2–3), 324–338.
Valdebenito, M. and Schuëller, G. (2009). “Efficient strategies for reliability-based optimization involving non linear, dynamical structures.” Technical Report IfM-Int. Work. Rep. No. 3-61, Institute of Engineering Mechanics, Univ. of Innsbruck, Austria.
Valdebenito, M. A., and Schuëller, G. I., (2010). “Reliability-based optimization considering design variables of discrete size.” Eng. Struct., 32(9), 2919–2930.
van Keulen, F., and Vervenne, K. (2004). “Gradient-enhanced response surface building.” Struct. Muldiscip. Optim, 27(5), 337–351.
Zienkiewicz, O., and Taylor, R. (2000). The finite element method, Vols I, II, and III, 5th Ed., Butterworth-Heinemann, Woburn, MA.
Information & Authors
Information
Published In
Journal of Engineering Mechanics
Volume 138 • Issue 1 • January 2012
Pages: 60 - 70
Copyright
© 2012 American Society of Civil Engineers.
History
Received: May 17, 2010
Accepted: Jul 25, 2011
Published online: Jul 27, 2011
Published in print: Jan 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.