Chemo-Mechanical Modeling Requirements for the Assessment of Concrete Structure Service Life
Publication: Journal of Engineering Mechanics
Volume 137, Issue 9
Abstract
This paper deals with the formulation requirements for the finite-element modeling of the life cycle of concrete structures subjected to chemical evolution combined with mechanical loading. In particular, it considers the coupling of chemical evolution with nonlinear mechanical behavior combining creep and damage. Not only do the parameters of the mechanical model have to be adapted to the effect of chemical evolution, but also the chemical effects on the internal mechanical state variables of the chemical evolution have to be carefully considered. These two couplings are discussed and clarified in a general formulation useful for a finite-element implementation of a mechanical behavior law intended for chemo-mechanical applications. The approach is illustrated through a model developed to assess the mechanical behavior of concrete structures subjected to hydration and then to leaching during their service life. Hydration and leaching need to be considered together in the same model to study how damage of the concrete at its early age can affect its response in the long term. The model is implemented in a finite-element code and applied, first to the simulation of an early age creep test and then to the prediction of the very-long-term mechanical behavior of a nuclear waste storage facility.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was partially supported by the French Group VINCI Construction Grands Projets and by the French agency for nuclear waste management ANDRA. Experimental results on concrete exposed to leaching were supplied by CEBTP (Lofti Hasni). We are also grateful to CEA for providing the finite-element code Castem.
References
Acker, P., and Ulm, F.-J. (2001). “Creep and shrinkage of concrete: Physical origins and practical measurements.” Nucl. Eng. Des., 203(2–3), 143–158.
Adenot, F. (1992). “Durabilité du béton: Caractérisation et modélisation des processus physiques et chimiques de dégradation du ciment.” Ph.D. thesis, Univ. of Orléans, Orléans, France (in French).
Alexander, M., and Bertron, A. (2009). “Concrete in aggressive aqueous environments.” RILEM TC 211-PAE Final Conf., RILEM, Bagneux, France.
Arrhenius, S. (1915) Quantitative laws in biological chemistry, G. Bell and Sons, London.
Bažant, Z. P., and Prasannan, S. (1989). “Solidification theory for concrete creep I. Formulation.” J. Eng. Mech., 115(8), 1691–1703.
Benboudjema, F., and Torrenti, J. M. (2008). “Early-age behaviour of concrete nuclear containments.” Nucl. Eng. Des., 238(10), 2495–2506.
Bernard, O., Ulm, F.-J., and Germaine, J. T. (2003a). “Volume and deviator creep of calcium-leached cement-based materials.” Cem. Concr. Res., 33(8), 1127–1136.
Bernard, O., Ulm, F.-J., and Lemarchand, E. (2003b). “A multiscale micromechanics-hydration model for the early age elastic properties of cement-based materials.” Cem. Concr. Res., 33(9), 1293–1309.
Brooks, J. J. (2005). “30-year creep and shrinkage of concrete.” Mag. Concr. Res., 57(9), 545–556.
Buffo-Lacarrière, L. (2007). “Prévision et évaluation de la fissuration précoce des ouvrages en béton.” Ph.D. thesis, Université de Toulouse, Toulouse, France (in French).
Buffo-Lacarrière, L., and Sellier, A. (2010a). “Application of an anisotropic damage model to the prediction of early age cracking.” FraMCoS-7, Aedificatio, Freiburg, Germany.
Buffo-Lacarrière, L., and Sellier, A. (2010b). “Numerical study of a massive reinforced concrete structure at early age: Prediction of the cracking risk of a massive wall.” Euro-C 2010—Computational modeling of concrete structures, Taylor and Francis Group, London.
Buffo-Lacarrière, L., Sellier, A., Escadeillas, G., and Turatsinze, A. (2007). “Multiphasic finite element modeling of concrete hydration.” Cem. Concr. Res., 37(2), 131–138.
Buil, M., Revertegat, E., and Oliver, J. (1992). “A model of the attack of pure water or undersaturated lime solutions on cement.” Stabilization and solidification of hazardous, radioactive, and mixed wastes, vol. 2, ASTM, Philadelphia, 227–241.
Carde, C., and François, R. (1996). “Leaching of both calcium hydroxide and CSH from cement paste: Modeling the mechanical behaviour.” Cem. Concr. Res., 26(8), 1257–1268.
Cervera, M., Oliver, J., and Prato, T. (1999). “Thermo-chemo-mechanical model for concrete. II: Damage and creep.” J. Eng. Mech., 125(9), 1028–1039.
Danese, S. (1997). Etude du couplage fissuration dégradation chimique des bétons : Fissure modèle sur pâte de ciment. Final Semester Project, Ecole nationale supérieure des arts et industries, Strasbourg, France (in French).
De Schutter, G. (1999). “Degree of hydration based Kelvin model for the basic creep of early age concrete.” Mater. Struct., 32(4), 260–265.
De Schutter, G. (2002). “Finite element simulation of thermal cracking in massive hardening concrete elements using degree of hydration based material laws.” Comput. Struct., 80(27–30), 2035–2042.
Gawin, D., Pesavento, F., and Schrefler, B. A. (2009). “Modeling deterioration of cementitious materials exposed to calcium leaching in non-isothermal conditions.” Comput. Methods Appl. Mech. Eng., 198(37–40), 3051–3083.
Gérard, B., Pijaudier-Cabot, G., and Laborderie, C. (1998). “Coupled diffusion-damage modelling and the implications on failure due to strain location.” Int. J. Solids Struct., 35(31–32), 4107–4120.
Grimal, E., Sellier, A., Le Pape, Y., and Bourdarot, E. (2008). “Creep, shrinkage and anisotropic damage in alkali-aggregate reaction swelling mechanism—Part I: A constitutive model.” ACI Mater. J., 105(3), 227–235.
Hasni, L. (2004). “Couplage mécanique chimie.” Status Rep. No. 3 of November 2004 for CEBTP contract, ANDRA No. 024624, GINGER-CEBTP Service Recherche Matériaux, Elancourt, France.
Heukamp, F. H., Ulm, F.-J., and Germaine, J. T. (2001). “Mechanical properties of calcium leached cement pastes: Triaxial stress states and the influence of the pore pressure.” Cem. Concr. Res., 31(5), 767–774.
Jia, Y., Song, X. C., Duveau, G., Su, K., and Shao, J. F. (2007). “Elastoplastic damage modelling of argillite in partially saturated condition and application.” Phys. Chem. Earth, 32(8–14), 656–666.
Kachanov, L. M. (1986). Introduction to continuum damage mechanics, M. Nijhoff, ed., Martinus Nijhoff Publishers, Dordrecht, Netherlands, 135.
Lacarrière, L., Sellier, A., and Bourbon, X. (2006). “Concrete mechanical behaviour and calcium leaching weak coupling.” Revue Européenne de Génie Civil, 10(9), 1147–1175.
Le Bellego, C., Gérard, B., and Pijaudier-Cabot, G. (2000). “Chemo-mechanical effects in mortar beams subjected to water hydrolysis.” J. Eng. Mech., 126(3), 266–272.
Nguyen, V. H., Colina, H., Torrenti, J. M., Boulay, C., and Nedjar, B. (2007). “Chemo-mechanical coupling behaviour of leached concrete. Part I: Experimental results.” Nucl. Eng. Des., 237(20–21), 2083–2078.
Pichler, C., Lackner, R., and Mang, H. A. (2007). “A multiscale micromechanics model for the autogenous-shrinkage deformation of early-age cement-based materials.” Eng. Fract. Mech., 74(1–2), 34–58.
Sanahuja, J., Dormieux, L., and Chanvillard, G. (2007). “Modelling elasticity of a hydrating cement paste.” Cem. Concr. Res., 37(10), 1427–1439.
Sellier, A. (2008). “Evaluation du comportement couple chimie-mécanique de matériaux cimentaires dans le contexte du stockage de déchets radioactifs en formation géologique profonde.” ANDRA Rep. C.RP.0.LMD.07.0001, HAVL-argile arborescence 5.1, LMDC, Toulouse, France, 162 (in French).
Sellier, A., and Bary, B. (2002). “Coupled damage tensors and weakest link theory for the description of crack induced anisotropy in concrete.” Eng. Fract. Mech., 69(17), 1925–1939.
Sellier, A., and Buffo-Lacarrière, L. (2009). “Towards a simple and unified modelling of basic creep, shrinkage and drying creep of concrete.” Eur. J. Environ. Civ. Eng., 13(10), 1161–1182.
Sellier, A., Buffo-Lacarrière, L., El Gonouni, M., and Bourbon, X. (2011). “Behavior of HPC nuclear waste disposal structures in leaching environment.” Nucl. Eng. Des., 241(1), 402–414.
Scheiner, S., and Hellmich, C. (2009). “Continuum microviscoelasticity model for aging basic creep of early-age concrete.” J. Eng. Mech., 135(4), 307–323.
Stefan, L., Benboudjema, F., Torrenti, J.-M., and Bissonette, B. (2010). “Prediction of elastic properties of cement pastes at early ages.” Comput. Mater. Sci., 47(3), 775–784.
Torrenti, J. M., Nguyen, V. H., Colina, H., Le Maou, F., Benboudjema, F., and Deleruyelle, F. (2008). “Coupling between leaching and creep of concrete.” Cem. Concr. Res., 38(6), 816–821.
Information & Authors
Information
Published In
Copyright
© 2011 American Society of Civil Engineers.
History
Received: Apr 15, 2010
Accepted: Mar 9, 2011
Published online: Mar 10, 2011
Published in print: Sep 1, 2011
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.