Interfacial Fracture Mechanics Approach to Delamination Resistance between Cement-Based Materials
Publication: Journal of Engineering Mechanics
Volume 135, Issue 10
Abstract
In this paper, a new method capable of predicting the critical deformation of composite materials with interfacial cracks is presented under mixed mode conditions using stress intensity factors and and the fracture criteria of the interface between concrete and cement-based wet finishing are evaluated. Two types of stress intensity factors are considered on the basis of the interfacial fracture mechanics. The stress distribution and singularity of the interface between dissimilar materials are obtained by two-dimensional elastostatic boundary element analyses under a plane strain state. Two types of stress intensity factors determine the mixed mode fracture criteria of the interfaces. Prediction of the first delamination and its development by these factors are compared with the empirical results of compressive tests on composite model specimens containing several types of finishing. It was confirmed that critical deformation could generally be predicted by the present method.
Get full access to this article
View all available purchase options and get full access to this article.
References
American Concrete Institute (ACI). (1991). ”Fracture mechanics of concrete: Concepts, models, and determination of material properties (Reapproved 1999).” Technical Rep. No. 446.1R–91, ACI, Detroit.
Bogy, D. B. (1971). “Two edge bonded elastic wedges of different materials and wedge angles under surface tractions.” J. Appl. Mech., 38, 377–386.
Cervenca, J., Chandra Kishen, J. M., and Saouma, V. E. (1998). “Mixed mode fracture of cementitious bimaterial interfaces—Part 2: Numerical simulation.” Eng. Fract. Mech., 60(1), 95–107.
Chandra Kishen, J. M., and Darunkumar Singh, K. (2001). “Stress intensity factors based fracture criteria for kinking and branching of interface crack: Applications to dams.” Eng. Fract. Mech., 68(2), 201–219.
England, A. H. (1965). “A crack between dissimilar media.” J. Appl. Mech., 32, 400–402.
Erdogan, F. (1963). “Stress distribution in a nonhomogeneous elastic plane with cracks.” J. Appl. Mech., 30, 232–238.
Erdogan, F. (1965). “Stress distribution in bonded dissimilar materials with cracks.” J. Appl. Mech., 32, 403–411.
Hutchinson, J. W., and Suo, Z. (1991). “Mixed mode cracking in layered materials.” Adv. Appl. Mech., 29, 63–192.
Ikeda, T., and Sun, C. T. (2001). “Stress intensity factor analysis for an interface crack between dissimilar isotropic materials under thermal stress.” Int. J. Fract., 111, 229–249.
Ikeda, Y., Miyazaki, N., Soda, T., and Munakata, T. (1992). “Mixed mode fracture criteria of interface crack between dissimilar materials.” JSME, 58(555), 2080–2087.
Rice, J. R. (1988). “Elastic fracture mechanics concepts for interfacial cracks.” J. Appl. Mech., 55, 98–103.
Rice, J. R., and Sih, G. C. (1965). “Plane problems of cracks in dissimilar media.” J. Appl. Mech., 32, 418–423.
Sih, G. C., and Rice, J. R. (1964). “The bending of plates of dissimilar materials with cracks.” J. Appl. Mech., 31, 477–483.
Williams, M. L. (1959). “The stresses around a fault or crack in dissimilar media.” Bull. Seismol. Soc. Am., 49(2), 199–204.
Yuuki, R., and Cho, S. B. (1989). “Efficient boundary element analysis of stress intensity factors for interface cracks in dissimilar materials.” Eng. Fract. Mech., 34(1), 179–188.
Yuuki, R., Liu, J. Q., Xu, J. Q., Ohira, T., and Ono, T. (1994). “Mixed mode fracture criteria for an interface crack.” Eng. Fract. Mech., 47(3), 367–377.
Yuuki, R., and Xu, J. Q. (1992). “Stress based criterion for an interface crack kinking out of the interface in dissimilar materials.” Eng. Fract. Mech., 41(5), 635–644.
Information & Authors
Information
Published In
Copyright
© 2009 ASCE.
History
Received: May 15, 2008
Accepted: Mar 3, 2009
Published online: Mar 5, 2009
Published in print: Oct 2009
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.