Modeling Triaxial Test on Intact Rock Using Discrete Element Method with Membrane Boundary
Publication: Journal of Engineering Mechanics
Volume 135, Issue 9
Abstract
A new membrane boundary that applies realistic fluid confining pressure has been developed for modeling triaxial tests on intact rock by using the discrete element method. To realistically simulate the confining pressure, the new approach applies updated boundary force rather than a “wall” boundary. The applied forces only act on the boundary particles, which are identified and updated periodically. Comparisons between rigid-wall boundary and membrane boundary show that rigid-wall boundary can significantly alter the material response especially the material strength. The effect of confining pressures on the simulated results of triaxial tests is also investigated.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers are grateful to Rio Tinto for sponsoring this research work under the project “Three-dimensional rock-fall analysis with impact fragmentation and fly-rock modeling.”
References
Arfken, G. (1985). Mathematical methods for physicists, 3rd Ed., Academic, Orlando, Fla.
Cho, N., Martin, C. D., and Sego, D. C. (2007). “A clumped particle model for rock.” Int. J. Rock Mech. Min. Sci., 44(7), 997–1010.
Cook, B. K., Lee, M. Y., DiGiovanni, A. A., Bronowski, D. R., Perkins, E. D., and Williams, J. R. (2004). “Discrete element modeling applied to laboratory simulation of near-wellbore mechanics.” Int. J. Geomech., 4(1), 19–27.
Cundall, P. (1971). “A computer model for simulating progressive large scale movements in blocky rock systems.” Proc., Symp. Int. Society of Rock Mechanics, Vol. 2, ISRM, Nancy, France, 129–136.
Cundall, P., and Hart, R. (1992). “Numerical modeling of discontinua.” Eng. Comput., 9(2), 101–113.
Cundall, P. A., and Strack, O. D. L. (1979). “A discrete element model for granular assemblies.” Geotechnique, 29(1), 47–65.
D'Addetta, G. A., Kun, F., Ramm, E., and Herrmann, H. J. (2001). “From solids to granulates—Discrete element simulations of fracture and fragmentation processes in geomaterials.” Lect. Notes Phys., 568, 231.
Donze, F. V., Bouchez, J., and Magnier, S. A. (1997). “Modeling fractures in rock blasting.” Int. J. Rock Mech. Min. Sci., 34(8), 1153–1163.
Hajiabdolmajid, V., Kaiser, P. K., and Martin, C. D. (2002). “Modeling brittle failure of rock.” Int. J. Rock Mech. Min. Sci., 39(6), 731–741.
Hentz, S. D., Daudeville, L., Donze, F. V. (2004). “Identification and validation of a discrete element model for concrete.” J. Eng. Mech., 130(6), 709–719.
Itasca. (1999). PFC3D manual, 1st Ed.
Jensen, R. P., Bosscher, P. J., Plesha, M. E., and Edil, T. B. (1999). “DEM simulation of granular media—Structure interface: Effects of surface roughness and particle shape.” Int. J. Numer. Analyt. Meth. Geomech., 23(6), 531–547.
Kuhn, M. R. (1995). “A flexible boundary for three-dimensional DEM particle assemblies.” Eng. Comput., 12(2), 175–183.
Martin, C. (1993). “The strength of massive Lac Du Bonnet granite around underground openings.” Ph.D. thesis, Univ. of Manitoba, Winnipeg, Canada.
Ng, T. -T. (2006). “Input parameters of discrete element methods.” J. Eng. Mech., 132(7), 723–729.
Onate, E., and Rojek, J. (2004). “Combination of discrete element and finite element methods for dynamic analysis of geomechanics problems.” Comput. Methods Appl. Mech. Eng., 193(27–29), 3087–3128.
Potyondy, D. O., and Cundall, P. A. (2004). “A bonded-particle model for rock.” Int. J. Rock Mech. Min. Sci., 41(8), 1329–1364.
Wang, Y., and Tonon, F. (2008). “Calibration of a discrete element model for intact rock.” Int. J. Numer. Analyt. Meth. Geomech., in press.
Zhang, R., and Sture, S. (1996). “Flexible boundary for discrete element simulation of granular assemblies.” Proc., 11th ASCE Engineering Mechanics Conf., Ft. Lauderdale, Fla., ASCE, New York.
Information & Authors
Information
Published In
Copyright
© 2009 ASCE.
History
Received: Jun 24, 2008
Accepted: Dec 22, 2008
Published online: Mar 6, 2009
Published in print: Sep 2009
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.