Observations of Stresses and Strains in a Granular Material
Publication: Journal of Engineering Mechanics
Volume 135, Issue 9
Abstract
The use of glass ballotini as a granular material provides the opportunity to simultaneously study internal stress fields and internal fields of deformation as a sample is submitted to boundary perturbations. Digital image correlation makes use of the visible fabric of the material to deduce a field of displacements from one digital photographic image to the next. If the glass granules are immersed in a fluid having the same refractive index, then observation with polarized light exploits the photoelastic properties of the glass to reveal information about the stresses. Again, comparison of digital photographs enables changes in stress conditions from one image to the next to be discovered. Tests performed in a simple loading device which forces rotation of principal axes in parts of the granular mass are presented to demonstrate the unique potential of this dual experimental configuration.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This collaboration was made possible by a British Council Research Partnership award which supported exchange visits between the two writers. The experiments conducted in Gdansk could not have been performed without the valuable assistance of Krzysztof Gaca and Dr. Marek Skodowski (IFTR PAS in Warsaw). The cheerful advice and guidance from David White in connection with the use of the program GeoPIV is gratefully acknowledged.
References
Adrian, R. J. (1991). “Particle imaging techniques for experimental fluid mechanics.” Annu. Rev. Fluid Mech., 23, 261–304.
Allersma, H. G. B. (1987). “Optical analysis of stress and strain in photoelastic particle assemblies.” Ph.D. thesis, Delft Technical Univ., Delft, The Netherlands.
Butterfield, R., Harkness, R. M., and Andrawes, K. Z. (1970). “A stereo-photogrammetric method for measuring displacement fields.” Geotechnique, 20(3), 308–314.
Dantu, P. (1957). “Contribution a l’etiude mecanique et geometrique des milieux pulverulents.” Proc., 4th Int. Conf. Soil Mechanics and Foundation Engineering, Vol. 1, Butterworths Scientific Publications, London, 144–148.
Desrues, J., Chambon, R., Mokni, M., and Mazerolle, F. (1996). “Void ratio evolution inside shear bands in triaxial sand specimens studied by computed tomography.” Geotechnique, 46(3), 529–546.
Desrues, J., and Viggiani, G. (2004). “Strain localization in sand: An overview of the experimental results obtained in Grenoble using stereophotogrammetry.” Int. J. Numer. Analyt. Meth. Geomech., 28, 279–321.
Desrues, J., Viggiani, G., and Besuelle, P. (2006). Advances in x-ray tomography for geomaterials, ISTE, London.
Drescher, A. (1976). “An experimental investigation of flow rules for granular materials using optically sensitive glass particles.” Geotechnique, 26(4), 591–601.
Drescher, A., and De Josselin de Jong, G. (1972). “Photoelastic verification of a mechanical model for the flow of a granular material.” J. Mech. Phys. Solids, 20, 337–351.
Dyer, M. R. (1985). “Observation of the stress distribution in crushed glass with applications to soil reinforcement.” Ph.D. thesis, Univ. of Oxford, Oxford, U.K.
Geng, J., Howell, D., Longhi, E., and Behringer, R. P. (2001). “Footprints in sand: The response of a granular material to local perturbations.” Phys. Rev. Lett., 87(3), 035506-1–035506-4.
Lesniewska, D., and Mroz, Z. (2000). “Limit equilibrium approach to study the evolution of shear band systems in soils.” Geotechnique, 50(5), 521–536.
Majmudar, T. S., and Behringer, R. P. (2005). “Contact force measurements and stress-induced anisotropy in granular materials.” Nature (London), 435, 1079–1082.
Muir Wood, D. (2002). “Some observations of volumetric instabilities in soils.” Int. J. Solids Struct., 39, 13–14, 3429–3449.
Rechenmacher, A. L., and Medina-Cetina, Z. (2007). “Calibration of soil constitutive models with spatially varying parameters.” J. Geotech. Geoenviron. Eng., 133(12), 1567–1576.
Roscoe, K. H. (1970). “The influence of strains in soil mechanics (10th Rankine Lecture).” Geotechnique, 20(2), 129–170.
Wakabayashi, T. (1957). “Photoelastic method for determination of stress in powdered mass.” Proc., 7th National Congress Applied Mechanics, Japan National Committee for Theoretical and Applied Mechanics, Science Council of Japan, Tokyo, Japan, 153–158.
White, D. J., Randolph, M., and Thompson, B. (2005). “An image-based deformation measurement system for the geotechnical centrifuge.” Int. J. Phys. Modell. Geotech., 3, 1–12.
White, D. J., and Take, W. A. (2002). “GeoPIV: Particle Image Velocimetry (PIV) software for use in geotechnical testing.” Rep. No. D-SOILS-TR322, Cambridge Univ.
White, D. J., Take, W. A., and Bolton, M. D. (2003). “Soil deformation measurement using particle image velocimetry (PIV) and photogrammetry.” Geotechnique, 53(7), 619–631.
Zuriguel, I., Mullin, T., and Rotter, J. M. (2007). “Effect of particle shape on the stress dip under a sandpile.” Phys. Rev. Lett., 98, 028001.
Information & Authors
Information
Published In
Copyright
© 2009 ASCE.
History
Received: Apr 19, 2008
Accepted: Dec 10, 2008
Published online: Mar 6, 2009
Published in print: Sep 2009
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.