Table Optimization of Operating Conditions for a Superwetting Ultrafiltration Ceramic Membrane
Publication: Journal of Environmental Engineering
Volume 146, Issue 4
Abstract
This paper represents an experimental and modeling study on the performance of a novel superwetting zirconium dioxide ultrafiltration membrane. The effects of different operating conditions were tested using an oily emulsion representing water produced from the Bakken oil reservoir (Canada). The Taguchi experimental methodology was used to predict the optimal operating conditions, and the results were validated experimentally. At optimal conditions, the ceramic membrane showed excellent performance for oil, total organic carbon (TOC), and turbidity rejections of 98%, 99%, and 99%, respectively. The highest flux achieved was at a transmembrane pressure (TMP) of 0.12 MPa (1.2 bar). pH was found to have the greatest contribution to oil rejection. After chemical cleaning, a high flux recovery of more than 97% was obtained. Hermia’s cake formation model had the closest correlation to the experimental data. Finally, an artificial neural network (ANN) model was used to fit the experimental data. The best fit was reached using the Bayesian regularization training algorithm.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
References
Abadi, S. R. H., M. R. Sebzari, M. Hemati, F. Rekabdar, and T. Mohammadi. 2011. “Ceramic membrane performance in microfiltration of oily wastewater.” Desalination 265 (1): 222–228. https://doi.org/10.1016/j.desal.2010.07.055.
Abbasi, M., M. Mirfendereski, M. Nikbakht, M. Golshenas, and T. Mohammadi. 2010. “Performance study of mullite and mullite–alumina ceramic MF membranes for oily wastewaters treatment.” Desalination 259 (1): 169–178. https://doi.org/10.1016/j.desal.2010.04.013.
Agarwal, H., A. S. Rathore, S. R. Hadpe, and S. J. Alva. 2016. “Artificial neural network (ANN)-based prediction of depth filter loading capacity for filter sizing.” Biotechnol. Progr. 32 (6): 1436–1443. https://doi.org/10.1002/btpr.2329.
Allende, D., D. Pando, M. Matos, C. E. Carleos, C. Pazos, and J. M. Benito. 2016. “Optimization of a membrane hybrid process for oil-in-water emulsions treatment using Taguchi experimental design.” Desalin. Water Treat. 57 (11): 4832–4841. https://doi.org/10.1080/19443994.2014.1002433.
Badrnezhad, R., and B. Mirza. 2014. “Modeling and optimization of cross-flow ultrafiltration using hybrid neural network-genetic algorithm approach.” J. Ind. Eng. Chem. 20 (2): 528–543. https://doi.org/10.1016/j.jiec.2013.05.012.
Corbatón-Báguena, M. J., M. C. Vincent-Vela, J. M. Gozálvez-Zafrilla, S. Álvarez-Blanco, J. Lora-García, and D. Catalán-Martínez. 2016. “Comparison between artificial neural networks and Hermia’s models to assess ultrafiltration performance.” Sep. Purif. Technol. 170 (Oct): 434–444. https://doi.org/10.1016/j.seppur.2016.07.007.
Defrance, L., and M. Y. Jaffrin. 1999. “Comparison between filtrations at fixed transmembrane pressure and fixed permeate flux: Application to a membrane bioreactor used for wastewater treatment.” J. Membr. Sci. 152 (2): 203–210. https://doi.org/10.1016/S0376-7388(98)00220-8.
Fakhru’l-Razi, A., A. Pendashteh, L. C. Abdullah, D. R. A. Biak, S. S. Madaeni, and Z. Z. Abidin. 2009. “Review of technologies for oil and gas produced water treatment.” J. Hazard. Mater. 170 (2): 530–551. https://doi.org/10.1016/j.jhazmat.2009.05.044.
Falahati, H., and A. Y. Tremblay. 2011. “Flux dependent oil permeation in the ultrafiltration of highly concentrated and unstable oil-in-water emulsions.” J. Membr. Sci. 371 (1): 239–247. https://doi.org/10.1016/j.memsci.2011.01.047.
Hermia, J. 1982. “Constant pressure blocking filtration laws—Application to power-law non-Newtonian fluids.” Trans. Inst. Chem. Eng. 60 (3): 183–187.
Hesampour, M., A. Krzyzaniak, and M. Nyström. 2008a. “The influence of different factors on the stability and ultrafiltration of emulsified oil in water.” J. Membr. Sci. 325 (1): 199–208. https://doi.org/10.1016/j.memsci.2008.07.048.
Hesampour, M., A. Krzyzaniak, and M. Nyström. 2008b. “Treatment of waste water from metal working by ultrafiltration, considering the effects of operating conditions.” Desalination 222 (1): 212–221. https://doi.org/10.1016/j.desal.2007.01.155.
Krajewski, S. R., W. Kujawski, F. Dijoux, C. Picard, and A. Larbot. 2004. “Grafting of powder and membrane by fluoroalkylsilanes.” Colloids Surf., A 243 (1): 43–47. https://doi.org/10.1016/j.colsurfa.2004.05.001.
Ng, L. Y. 2013. “Polymeric membranes incorporated with metal/metal oxide nanoparticles: A comprehensive review.” Desalin. 308 (Jan): 15–33. https://doi.org/10.1016/j.desal.2010.11.033.
Nonato, T. C., A. Alcione, M. L. Sens, and R. L. Dalsasso. 2018. “Produced water from oil-A review of the main treatment technologies.” J. Environ. Chem. Toxicol. 2 (1): 23–27.
Pan, Y., T. Wang, H. Sun, and W. Wang. 2012. “Preparation and application of titanium dioxide dynamic membranes in microfiltration of oil-in-water emulsions.” Sep. Purif. Technol. 89 (Mar): 78–83. https://doi.org/10.1016/j.seppur.2012.01.010.
Reyhani, A., K. Sepehrinia, S. M. Shahabadi, F. Rekabdar, and A. Gheshlaghi. 2015. “Optimization of operating conditions in ultrafiltration process for produced water treatment via Taguchi methodology.” Desalin. Water Treat. 54 (10): 2669–2680. https://doi.org/10.1080/19443994.2014.904821.
Salahi, A., M. Abbasi, and T. Mohammadi. 2010. “Permeate flux decline during UF of oily wastewater, experimental and modeling.” Desalin. Water Treat. 251 (1–3): 153–160. https://doi.org/10.1016/j.desal.2009.08.006.
Salama, A., and P. J. Van Geel. 2008a. “Flow and solute transport in saturated porous media. 1: The continuum hypothesis.” J. Porous Media 11 (4): 403–413. https://doi.org/10.1615/JPorMedia.v11.i4.60.
Salama, A., and P. J. Van Geel. 2008b. “Flow and solute transport in saturated porous media. 2: Violating the continuum hypothesis” J. Porous Media 11 (5): 421–441. https://doi.org/10.1615/JPorMedia.v11.i5.10.
Silalahi, H. D., and T. Leiknes. 2009. “Cleaning strategies in ceramic microfiltration membranes fouled by oil and particulate matter in produced water.” Desalination 236 (1–3): 160–169. https://doi.org/10.1016/j.desal.2007.10.063.
Trentin, A., C. Güell, T. Gelaw, S. De Lamo, and M. Ferrando. 2012. “Cleaning protocols for organic microfiltration membranes used in premix membrane emulsification.” Sep. Purif. Technol. 88 (Mar): 70–78. https://doi.org/10.1016/j.seppur.2011.12.003.
Wang, P., N. Xu, and J. Shi. 2000. “A pilot study of the treatment of waste rolling emulsion using zirconia microfiltration membranes.” J. Membr. Sci. 173 (2): 159–166. https://doi.org/10.1016/S0376-7388(00)00372-0.
Weschenfelder, S. E., A. M. Louvisse, C. P. Borges, E. Meabe, J. Izquierdo, and J. C. Campos. 2015. “Evaluation of ceramic membranes for oilfield produced water treatment aiming reinjection in offshore units.” J. Pet. Sci. Eng. 131 (Jul): 51–57. https://doi.org/10.1016/j.petrol.2015.04.019.
Wu, C., A. Li, L. Li, L. Zhang, H. Wang, X. Qi, and Q. Zhang. 2008. “Treatment of oily water by a poly (vinyl alcohol) ultrafiltration membrane.” Desalination 225 (1): 312–321. https://doi.org/10.1016/j.desal.2007.07.012.
Yang, C., G. Zhang, N. Xu, and J. Shi. 1998. “Preparation and application in oil–water separation of MF membrane.” J. Membr. Sci. 142 (2): 235–243. https://doi.org/10.1016/S0376-7388(97)00336-0.
Yang, Y., R. Chen, and W. Xing. 2011. “Integration of ceramic membrane microfiltration with powdered activated carbon for advanced treatment of oil-in-water emulsion.” Sep. Purif. Technol. 76 (3): 373–377. https://doi.org/10.1016/j.seppur.2010.11.008.
Zhou, J. E., Q. Chang, Y. Wang, J. Wang, and G. Meng. 2010. “Separation of stable oil–water emulsion by the hydrophilic nano-sized modified microfiltration membrane.” Sep. Purif. Technol. 75 (3): 243–248. https://doi.org/10.1016/j.seppur.2010.08.008.
Zhu, Y., D. Wang, L. Jiang, and J. Jin. 2014. “Recent progress in developing advanced membranes for emulsified oil/water separation.” NPG Asia Mater. 6 (5): e101–e111. https://doi.org/10.1038/am.2014.23.
Zirehpour, A., A. Rahimpour, M. Jahanshahi, and M. Peyravi. 2014. “Mixed matrix membrane application for olive oil wastewater treatment: Process optimization based on Taguchi design method.” J. Environ. Manage. 132 (Jan): 113–120. https://doi.org/10.1016/j.jenvman.2013.10.028.
Zsirai, T., A. K. Al-Jaml, H. Qiblawey, M. Al-Marri, A. Ahmed, S. Bach, S. Watson, and S. Judd. 2016. “Ceramic membrane filtration of produced water: Impact of membrane module.” Sep. Purif. Technol. 165: 214–221. https://doi.org/10.1016/j.seppur.2016.04.001.
Information & Authors
Information
Published In
Copyright
©2020 American Society of Civil Engineers.
History
Received: Nov 20, 2018
Accepted: Aug 29, 2019
Published online: Feb 14, 2020
Published in print: Apr 1, 2020
Discussion open until: Jul 14, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.