Seawater-Washed Activated Bauxite Residue for Fluoride Removal: Waste Utilization Technique
Publication: Journal of Environmental Engineering
Volume 144, Issue 5
Abstract
Adsorption of fluoride on seawater-washed activated bauxite residue (SWABR) was studied by using fluoride ion analyzer (ion-selective electrode meter). Bauxite residue from the Bayer process is a waste of aluminium refinery, which is highly alkaline and generated in large quantities, which make its disposal a growing problem. The characterization of SWABR was done by using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy with X-ray microanalysis (SEM/EDS), transmission electron microscope (TEM), and selected-area electron diffraction (SAED) techniques. The adsorption studies indicate the highest fluoride removal efficiency of 95.83% for a SWABR dosage of at pH 5. The effect of pH, SWABR dosage, contact time, and initial fluoride concentration on the fluoride removal efficiency was studied and discussed. Adsorption isotherm experiments showed that fluoride adsorption on SWABR fits Freundlich adsorption isotherm () better than Langmuir adsorption isotherm (). The field application of SWABR as an adsorbent for defluoridation of groundwater from Gadag District of Karnataka State, India, was also investigated.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to thank Hindalco Industries, Belagavi, Karnataka, India, for supplying the bauxite residue. They would also like to thank SAIF facilities at Indian Institute of Technology, Mumbai, and STIC India, Cochin, for the XRD, FTIR, SEM-FEG, and TEM analyses.
References
Agarwal, M., Rai, K., Shrivastav, R., and Dass, S. (2003). “Defluoridation of water using amended clay.” J. Cleaner Prod., 11(4), 439–444.
Al-Degs, Y. S., El-Barghouthi, M. I., El-Sheikh, A. H., and Walker, G. M. (2008). “Effect of solution pH, ionic strength and temperature on adsorption behavior of reactive dyes on activated carbon.” Dyes Pigm., 77(1), 16–23.
Amor, Z., Bariou, B., Mameri, N., Toky, M., Nocolas, S., and Elmidaoui, S. (2001). “Fluoride removal from brackish water by electrodialysis.” Desalination, 133(3), 215–223.
Brindha, K., Rajesh, R., Murugan, R., and Elango, L. (2011). “Fluoride contamination in groundwater in parts of Nalgonda District, Andhra Pradesh, India.” Environ. Monit. Assess., 172(1–4), 481–492.
Castaldi, P., Silvetti, M., Enzo, S., and Melis, P. (2010a). “Influence of the pH on the accumulation of phosphate by red mud (a bauxite ore processing waste).” J. Hazard. Mater., 182(1–3), 266–272.
Castaldi, P., Silvetti, M., Enzo, S., and Melis, P. (2010b). “Study of sorption processes and FT-IR analysis of arsenate sorbed onto red muds (a bauxite ore processing waste).” J. Hazard. Mater., 175(1–3), 172–178.
Cengeloglu, Y., Kir, E., and Ersoz, M. (2002). “Removal of fluoride from aqueous solution by using red mud.” Sep. Purif. Technol., 28(1), 81–86.
Cengeloglu, Y., Tor, A., Arslan, G., Ersoz, M., and Gezgin, S. (2007). “Removal of boron from aqueous solution by using neutralized red mud.” J. Hazard. Mater., 142(1–2), 412–417.
Cengeloglu, Y., Tor, A., Ersoz, M., and Arslan, G. (2006). “Removal of nitrate from aqueous solution by using red mud.” Sep. Purif. Technol., 51(3), 374–378.
Chae, G., Yun, S., and Mayer, B. (2007). “Fluorine geochemistry in bedrock groundwater of South Korea.” Sci. Total Environ., 385(1–3), 272–283.
Chang-Jun, L., Zhong, L., Zhao-Kun, L., Zhao-Yang, C., Zhong-Guo, Z., and Zhi-Ping, J. (2007). “Adsorption removal of phosphate from aqueous solution by active red mud.” J. Environ. Sci., 19(10), 1166–1170.
Chauhan, S., and Silori, C. (2010). “Rehabilitation of red mud bauxite wasteland in India (Belgaum, Karnataka).” Ecol. Restor., 28(1), 12–14.
Chen, H., Wang, G., Xu, Y., Chenac, Z., and Yin, F. (2016). “Application of red mud as both neutralizer and catalyst in supercritical water oxidation (SCWO) disposal of sewage sludge.” RSC Adv., 6(59), 54202–54214.
Deng, H., and Yu, X. (2015). “Fluoride removal from drinking water by zirconium-impregnated fibrous protein.” Desalin. Water Treat., 54(6), 1594–1603.
Dou, X., Zhang, Y., Wang, H., Wang, T., and Wang, Y. (2011). “Performance of granular zirconium–iron oxide in the removal of fluoride from drinking water.” Water Res., 45(12), 3571–3578.
Du, J., Sabatini, D. A., and Butler, E. C. (2017). “Evaluation of aluminum hydroxide-amended zeolites in fluoride removal: Column filtration and regeneration.” J. Environ. Eng., 04016092.
Eaton, A. D., and Franson, M. A. H. (2005). Standard methods for examination of water and wastewater, 21st Ed., American Public Health Association, Washington, DC.
Fan, X., Parker, D. J., and Smith, M. D. (2003). “Adsorption kinetics of fluoride on low cost materials.” Water Res., 37(20), 4929–4937.
Gago, C., Romar, A., Fernandez-Marcos, M. L., and Alvarez, E. (2014). “Fluoride sorption and desorption on soils located in the surroundings of an aluminium smelter in Galicia (NW Spain).” Environ. Earth Sci., 72(10), 4105–4114.
Guo, L., Hunt, B. J., and Santsci, P. H. (2001). “Ultrafiltration behavior of major ions (, , , , , and ) in natural waters.” Water Res., 35(6), 1500–1508.
Gupta, V. K., Gupta, M., and Sharma, S. (2001). “Process development for the removal of lead and chromium from aqueous solutions using red mud—An aluminium industry waste.” Water Res., 35(5), 1125–1134.
Hairi, S. N. M., Jameson, G. N. L., Rogers, J. J., and MacKenzie, K. J. D. (2015). “Synthesis and properties of inorganic polymers (geo-polymers) derived from Bayer process residue (red mud) and bauxite.” J. Mater. Sci., 50(23), 7713–7724.
Hua, Y., Heal, K. V., and Friesl-Hanl, W. (2017). “The use of red mud as an immobiliser for metal/metalloid-contaminated soil: A review.” J. Hazard. Mater., 325, 17–30.
Huang, Y., Chai, W., Han, G., Wang, W., Yang, S., and Liu, J. (2016). “A perspective of stepwise utilisation of Bayer red mud: Step two—Extracting and recovering Ti from Ti-enriched tailing with acid leaching and precipitate flotation.” J. Hazard. Mater., 307, 318–327.
Huang, Y. H., Shih, Y. J., and Chang, C. C. (2011). “Adsorption of fluoride by waste iron oxide: The effects of solution pH, major coexisting anions and adsorbent calcination temperature.” J. Hazard. Mater., 186(2–3), 1355–1359.
Jagtap, S., Thakre, D., Wanjari, S., Kamble, S., Labhsetwar, N., and Rayalu, S. (2009). “New modified chitosan-based adsorbent for defluoridation of water.” J. Colloid Interface Sci., 332(2), 280–290.
Kim, K., and Jeong, G. Y. (2005). “Factors influencing natural occurrence of fluoride-rich groundwaters: A case study in the southeastern part of the Korean Peninsula.” Chemosphere, 58(10), 1399–1408.
Koujalagi, P. S., Divekar, S. V., Kulkarni, R. M., Rajaram, K., and Nagarale, R. (2013). “Kinetics, thermodynamic, and adsorption studies on removal of chromium(VI) using Tulsion A-27(MP) resin.” Desalin. Water Treat., 51(16–18), 3273–3283.
Liang, W., Couperthwaite, S. J., Kaur, G., Yan, C., Johnstone, D. W., and Millar, G. J. (2014). “Effect of strong acids on red mud structural and fluoride adsorption properties.” J. Colloid Interface Sci., 423, 158–165.
Lockwood, C. L., et al. (2014). “Mobilisation of arsenic from bauxite residue (red mud) affected soils: Effect of pH and redox conditions.” Appl. Geochem., 51, 268–277.
Loganathan, P., Vigneswaran, S., Kandasamy, J., and Naidu, R. (2013). “Defluoridation of drinking water using adsorption processes.” J. Hazard. Mater., 248, 1–19.
Lopes, G., Guilherme, L. R. G., Costa, E. T. S., Curi, N., and Penha, H. G. V. (2013). “Increasing arsenic sorption on red mud by phosphor-gypsum addition.” J. Hazard. Mater., 262, 1196–1203.
Mohapatra, M., Anand, S., Mishra, B. K., Giles, D. E., and Singh, P. (2009). “Review of fluoride removal from drinking water.” J. Environ. Manage., 91(1), 67–77.
Ndiaye, P. I., Moulin, P., Dominguez, L., Millet, J. C., and Charbit, F. (2005). “Removal of fluoride from electronic industrial effluent by RO membrane separation.” Desalination, 173(1), 25–32.
Palmer, S. J., Reddy, B. J., and Frost, R. L. (2009). “Characterisation of red mud by UV-vis-NIR spectroscopy.” Spectrochim. Acta Part A, 71(5), 1814–1818.
PCPDFWIN version 2.1 [Computer software]. ICDD, Newton Square, PA.
Poulin, E., Blais, J., and Mercier, G. (2008). “Transformation of red mud from aluminium industry into a coagulant for wastewater treatment.” Hydrometallurgy, 92(1–2), 16–25.
Raichur, A. M., and Basu, M. J. (2001). “Adsorption of fluoride onto mixed rare earth oxides.” Sep. Purif. Technol., 24(1–2), 121–127.
Saxena, V. K., and Ahmed, S. (2003). “Inferring the chemical parameters for the dissolution of fluoride in groundwater.” Environ. Geol., 43, 731–736.
Shaban, M., Abukhadra, M. R., Shahien, M. G., and Khan, A. A. P. (2017). “Upgraded modified forms of bituminous coal for the removal of safranin-T dye from aqueous solution.” Environ. Sci. Pollut. Res., 24(22), 18135–18151.
Sharififard, H., and Soleimani, M. (2015). “Performance comparison of activated carbon and ferric oxide-hydroxide-activated carbon nanocomposite as vanadium(V) ion adsorbents.” RSC Adv., 5(98), 80650–80660.
Singh, K., Lataye, D. H., and Wasewar, K. L. (2016). “Removal of fluoride from aqueous solution by using low-cost sugarcane Bagasse: Kinetic study and equilibrium isotherm analyses.” J. Hazard. Toxic Radioact. Waste, 04015024.
Singh, K., Lataye, D. H., Wasewara, K. L., and Yoo, C. K. (2013). “Removal of fluoride from aqueous solution: Status and techniques.” Desalin. Water Treat., 51(16–18), 3233–3247.
Sutar, H., Mishra, S., Sahoo, S., Chakraverty, A. P., and Maharana, H. S. (2014). “Progress of red mud utilization: An overview.” Am. Chem. Sci. J., 4(3), 255–279.
Tor, A. (2006). “Removal of fluoride from an aqueous solution by using montmorillonite.” Desalination, 201(1–3), 267–276.
Tor, A. (2007). “Removal of fluoride from water using anion-exchange membrane under Donnan dialysis condition.” J. Hazard. Mater., 141(3), 814–818.
Tor, A., Danaoglu, N., Arslan, G., and Cengeloglu, Y. (2009). “Removal of fluoride from water by using granular red mud: Batch and column studies.” J. Hazard. Mater., 164(1), 271–278.
Tripathy, S. S., Bersillon, J., and Gopal, K. (2006). “Removal of fluoride from drinking water by adsorption onto alum-impregnated activated alumina.” Sep. Purif. Technol., 50(3), 310–317.
Wang, S., Boyjoo, Y., Choueib, A., and Zhu, Z. H. (2005). “Removal of dyes from aqueous solution using fly ash and red mud.” Water Res., 39(1), 129–138.
WHO (World Health Organization). (2011). Guidelines for drinking water quality, Geneva.
Wu, H. X., Wang, T. J., Chen, L., and Yong, J. (2009). “The roles of the surface charge and hydroxyl group on a Fe-Al-Ce adsorbent in fluoride adsorption.” Ind. Eng. Chem. Res., 48(9), 4530–4534.
Yue, Q., et al. (2010). “Research on the characteristics of red mud granular adsorbents (RMGA) for phosphate removal.” J. Hazard. Mater., 176(1–3), 741–748.
Zhang, H., et al. (2014). “Mechanism of red mud combined with Fenton’s reagent in sewage sludge conditioning.” Water Res., 59, 239–247.
Zhang, S., Liu, C., Luan, Z., Peng, X., Ren, H., and Wang, J. (2008). “Arsenate removal from aqueous solutions using modified red mud.” J. Hazard. Mater., 152(2), 486–492.
Zhao, Y., Wang, J., Luan, Z., Peng, X., Liang, Z., and Shi, L. (2009). “Removal of phosphate from aqueous solution by red mud using a factorial design.” J. Hazard. Mater., 165(1–3), 1193–1199.
Zhu, C., Luan, Z., Wang, Y., and Shan, X. (2007). “Removal of cadmium from aqueous solutions by adsorption on granular red mud (GRM).” Sep. Purif. Technol., 57(1), 161–169.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: Jun 10, 2017
Accepted: Nov 1, 2017
Published online: Mar 15, 2018
Published in print: May 1, 2018
Discussion open until: Aug 15, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.