Estimating Nutrient and Organic Carbon Loads to Water-Supply Reservoir Using Semiparametric Models
Publication: Journal of Environmental Engineering
Volume 142, Issue 8
Abstract
This study investigated the impact of model form and flexibility on estimates of constituent loads to a water-supply reservoir. A series of load-estimation regression models were calibrated and used to predict nutrient (nitrate-nitrogen and total phosphorus) and organic carbon loads from three major tributaries of a water-supply reservoir. These models included traditional linear models (LMs) as well as semiparametric generalized additive models (GAMs). The relative performance of each model was determined using cross-validation. GAMs, which employ more flexible model structures, outperformed LMs in most cases, explaining an additional 2% of load variance and 5% of concentration variance in validation data on average. Resulting point load estimates from the 1.5-year study period were similar between the two modeling approaches, yielding overlapping 95% confidence intervals in all nine cases modeled. A novel graphical method was developed to present relative agreement between the two model types as a function of the time interval over which the load is estimated. This revealed relative differences between the two modeling approaches in excess of 100% depending on the time interval of the load estimate. The time-dependent disagreement between similarly well-performing models highlights an aspect of model uncertainty not visible in more structurally restrictive modeling approaches.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was funded by the Massachusetts Department of Conservation and Recreation (MassDCR). The authors would like to thank Ms. Patricia Austin, Mr. Lawrence Pistrang, and Mr. Steve Sulprizio at MassDCR for providing the data and their review for this paper.
References
Aulenbach, B., and Hooper, R. (2006). “The composite method: An improved method for stream-water solute load estimation.” Hydrol. Process., 20(14), 3029–3047.
Brett, M., Mueller, S., and Arhonditsis, G. (2005). “A daily time series analysis of streamwater phosphorus concentrations along an urban to forest gradient.” Environ. Manage., 35(1), 56–71.
Clesceri, L. S., Greenberg, A. E., and Eaton, A. D. (1998). “Standard methods for the examination of water and wastewater.” American Public Health Association (APHA), Washington, DC.
Cohn, T., Delong, L., and Gilroy, E. (1989). “Estimating constituent loads.” Water Resour. Res., 25(5), 937–942.
Cohn, T. A., Caulder, D. L., Gilroy, E. J., Zynjuk, L. D., and Summers, R. M. (1992). “The validity of a simple statistical model for estimating fluvial constituent loads: An empirical study involving nutrient loads entering Chesapeake Bay.” Water Resour. Res., 28(9), 2353–2363.
Cox, N. J., Warburton, J., Armstrong, A., and Holliday, V. J. (2008). “Fitting concentration and load rating curves with generalized linear models.” Earth Surf. Proc. Land., 33(1), 25–39.
Drewry, J., Newham, L., and Croke, B. (2009). “Suspended sediment, nitrogen and phosphorus concentrations and exports during storm-events to the Tuross estuary, Australia.” J. Environ. Manage., 90(2), 879–887.
Duan, N. (1983). “Smearing estimate: A nonparametric retransformation method.” J. Am. Sta. Assoc., 78(383), 605–610.
Ferguson, R. I. (1986). “River loads underestimated by rating curves.” Water Resour. Res., 22(1), 74–76.
Fiedler, E. (2009). “Modeling the Wachusett Reservoir, central Massachusetts, tributaries for improved watershed management.” Master thesis, Univ. of Massachusetts, Amherst, MA.
Gilroy, E., Hirsch, R., and Cohn, T. (1990). “Mean square error of regression-based constituent transport estimates.” Water Resour. Res., 26(9), 2069–2077.
Guo, Y., Markus, M., and Demissie, M. (2002). “Uncertainty of nitrate-N load computations for agricultural watersheds.” Water Resour. Res., 38(10), 3-1–3-12.
Helsel, D. R., and Hirsch, R. M. (2002). “Statistical methods in water resources.” Techniques of water-resources investigations of the United States Geological Survey book 4: Hydrologic analysis and interpretation, Vol. 323, U.S. Geological Survey, Reston, VA.
Huntington, T., and Aiken, G. (2013). “Export of dissolved organic carbon from the Penobscot River basin in north-central Maine.” J. Hydrol., 476, 244–256.
Kumar, S., Godrej, A. N., and Grizzard, T. J. (2013). “Watershed size effects on applicability of regression-based methods for fluvial loads estimation.” Water Resour. Res., 49(11), 7698–7710.
Leisenring, M., and Moradkhani, H. (2012). “Analyzing the uncertainty of suspended sediment load prediction using sequential data assimilation.” J. Hydrol., 468, 268–282.
Littlewood, I. G., Watts, C. D., and Custance, J. M. (1998). “Systematic application of United Kingdom river flow and quality databases for estimating annual river mass loads (1974–1994).” Sci. Total Environ., 210/211, 21–40.
MassDCR (Massachusetts Department of Conservation and Recreation). (2013). “Water quality report: 2012 Wachusett Reservoir and Sudbury Reservoir watersheds.” 〈http://www.mass.gov/eea/docs/dcr/watersupply/watershed/2012wachusettwqreport.pdf〉 (Dec. 1, 2014).
R Development Core Team. (2008). R: A language and environment for statistical computing, R Foundation for Statistical Computing, Vienna, Austria.
Runkel, R. L., Crawford, C. G., and Cohn, T. A. (2004). Load estimator (LOADEST): A FORTRAN program for estimating constituent loads in streams and rivers, U.S. Geological Survey, Reston, VA, 69.
Stenback, G. A., Crumpton, W. G., Schilling, K. E., and Helmers, M. J. (2011). “Rating curve estimation of nutrient loads in Iowa rivers.” J. Hydrol., 396(1–2), 158–169.
Swistock, B. R., Edwards, P. J., Wood, F., and Dewalle, D. R. (1997). “Comparison of methods for calculating annual solute exports from six forested Appalachian watersheds.” Hydrol. Process., 11(7), 655–669.
Ullrich, A., and Volk, M. (2010). “Influence of different nitrate-N monitoring strategies on load estimation as a base for model calibration and evaluation.” Environ. Monit. Assess., 171(1–4), 513–527.
U.S. EPA (U. S. Environmental Protection Agency). (1999). “Methods and guidance for the analysis of water.” National Technical Information Service (NTIS), Alexandria, VA.
Verma, S., Markus, M., and Cooke, R. A. (2012). “Development of error correction techniques for nitrate-N load estimation methods.” J. Hydrol., 432, 12–25.
Vogel, R. M., Rudolph, B. E., and Hooper, R. P. (2005). “Probabilistic behavior of water-quality loads.” J. Environ. Eng., 1081–1089.
Wang, Y.-G., Kuhnert, P., and Henderson, B. (2011). “Load estimation with uncertainties from opportunistic sampling data: A semiparametric approach.” J. Hydrol., 396(1–2), 148–157.
Wang, Y.-G., and Tian, T. (2013). “Sediment concentration prediction and statistical evaluation for annual load estimation.” J. Hydrol., 482, 69–78.
Wood, S. N. (2011). “Fast stable restricted maximum likelihood and marginal likelihood estimation of semiparametric generalized linear models.” J. R. Stat. Soc. (B), 73(1), 3–36.
Yoon, B., and Raymond, P. A. (2012). “Dissolved organic matter export from a forested watershed during Hurricane Irene.” Geophys. Res. Lett., 39(18), L14802.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Feb 19, 2015
Accepted: Oct 23, 2015
Published online: Mar 2, 2016
Published in print: Aug 1, 2016
Discussion open until: Aug 2, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.