Mathematical Modeling of Heavy Metal Biosorption in Multispecies Biofilms
Publication: Journal of Environmental Engineering
Volume 142, Issue 9
Abstract
The biofilm matrix is a complex of secreted polymers, absorbed nutrients and metabolites, cell lysis products, and even particulate material. Being polyanionic in nature, this matrix plays a crucial role in the biosorption of metal cations. In this work, the adsorption process of heavy metals in biofilms is modeled in one space dimension. The mathematical model is a free-boundary value problem for nonlinear hyperbolic and parabolic partial differential equations. Biomass and extracellular polymeric substances (EPS) growth is governed by hyperbolic equations, and substrate evolution by parabolic equations. All equations are mutually connected. The model is general and can work for any number of microbial species, EPS, and substrates. In numerical analysis, heterotrophic–autotrophic competition for space with oxygen as common substrate is considered. The model can describe biofilm growth dynamics including spatial distribution of microbial species, substrate concentrations, EPS formation, and, in particular, is able to simulate heavy metal diffusion and adsorption into biofilm. Numerical simulations for representative examples are obtained by the method of characteristics. Results indicate that model is able to capture the main features of heavy metal adsorption process on EPS.
Get full access to this article
View all available purchase options and get full access to this article.
References
Alpkvist, E., and Klapper, I. (2007). “A multidimensional multispecies continuum model for heterogeneous biofilm development.” Bull. Math. Biol., 69(2), 765–789.
Bartlett, P., and Gardner, J. (1996). “Diffusion and binding of molecules to sites within homogeneous thin films.” Philos. Trans. R. Soc. London, Ser. A, 354(1704), 35–57.
Clarelli, F., Di Russo, C., Natalini, R., and Ribot, M. (2013). “A fluid dynamics model of the growth of phototrophic biofilms.” J. Math. Biol., 66(7), 1387–1408.
Clarelli, F., Di Russo, C., Natalini, R., and Ribot, M. (2015). “A fluid dynamics multi-dimensional model of biofilm growth: Stability, influence of environment and sensitivity.” Math. Med. Biol., 1–25.
D’Acunto, B., Esposito, G., Frunzo, L., Mattei, M. R., and Pirozzi, F. (2013). “Analysis and simulations of the initial phase in multispecies biofilm formation.” Commun. Appl. Ind. Math., 4, 1–23.
D’Acunto, B., Esposito, G., Frunzo, L., and Pirozzi, F. (2011). “Dynamic modeling of sulfate reducing biofilms.” Comput. Math. Appl., 62(6), 2601–2608.
D’Acunto, B., and Frunzo, L. (2011). “Qualitative analysis and simulations of a free boundary problem for mulispecies biofilm models.” Math. Comput. Model, 53(9–10), 1596–1606.
D’Acunto, B., and Frunzo, L. (2012). “Free boundary problem for an initial cell layer in multispecies biofilm formation.” Appl. Math. Lett., 25(1), 20–26.
D’Acunto, B., Frunzo, L., Klapper, I., and Mattei, M. (2014). “Modelling multispecies biofilms including new bacterial species invasion.” Math. Biosci., 259, 20–26.
Dockery, J., and Klapper, I. (2002). “Finger formation in biofilm layers.” SIAM J. Appl. Math., 62(3), 853–869.
Eberl, H. J., Parker, D. F., and Van Loosdrecht, M. (2001). “A new deterministic spatio temporal continuum model for biofilm development.” Comput. Math. Methods Med., 3(3), 161–175.
Flemming, H.-C., Neu, T. R., and Wozniak, D. J. (2007). “The eps matrix: The house of biofilm cells.” J. Bacteriol., 189(22), 7945–7947.
Frunzo, L., Esposito, G., Pirozzi, F., and Lens, P. (2012). “Dynamic mathematical modeling of sulfate reducing gas-lift reactors.” Process Biochem., 47(12), 2172–2181.
Gadd, G. M. (2009). “Biosorption: Critical review of scientific rationale, environmental importance and significance for pollution treatment.” J. Chem. Technol. Biotechnol., 84(1), 13–28.
Kreft, J.-U., Picioreanu, C., Wimpenny, J. W., and van Loosdrecht, M. C. (2001). “Individual-based modelling of biofilms.” Microbiology, 147(11), 2897–2912.
Laspidou, C. S., and Rittmann, B. E. (2002). “Non-steady state modeling of extracellular polymeric substances, soluble microbial products, and active and inert biomass.” Water Res., 36(8), 1983–1992.
Laspidou, C. S. and Rittmann, B. E. (2004). “Modeling the development of biofilm density including active bacteria, inert biomass, and extracellular polymeric substances.” Water Res., 38(14), 3349–3361.
Li, W.-W., and Yu, H.-Q. (2014). “Insight into the roles of microbial extracellular polymer substances in metal biosorption.” Bioresour. Technol., 160, 15–23.
Mattei, M. R., D’Acunto, B., Esposito, G., Frunzo, L., and Pirozzi, F. (2015). “Mathematical modeling of competition and coexistence of sulfate-reducing bacteria, acetogens, and methanogens in multispecies biofilms.” Desalin. Water Treat., 55(3), 740–748.
Merkey, B. V., Rittmann, B. E., and Chopp, D. L. (2009). “Modeling how soluble microbial products (smp) support heterotrophic bacteria in autotroph-based biofilms.” J. Theor. Biol., 259(4), 670–683.
Pal, A., and Paul, A. (2008). “Microbial extracellular polymeric substances: Central elements in heavy metal bioremediation.” Indian J. Microbiol., 48(1), 49–64.
Paul, D., Pandey, G., Pandey, J., and Jain, R. K. (2005). “Accessing microbial diversity for bioremediation and environmental restoration.” TRENDS Biotechnol., 23(3), 135–142.
Phoenix, V., and Holmes, W. (2008). “Magnetic resonance imaging of structure, diffusivity, and copper immobilization in a phototrophic biofilm.” Appl. Environ. Microbiol., 74(15), 4934–4943.
Picioreanu, C., Van Loosdrecht, M. C., and Heijnen, J. J. (1998). “Mathematical modeling of biofilm structure with a hybrid differential-discrete cellular automaton approach.” Biotechnol. Bioeng., 58(1), 101–116.
Singh, R., Paul, D., and Jain, R. K. (2006). “Biofilms: Implications in bioremediation.” TRENDS Microbiol., 14(9), 389–397.
Teitzel, G. M., and Parsek, M. R. (2003). “Heavy metal resistance of biofilm and planktonic pseudomonas aeruginosa.” Appl. Environ. Microbiol., 69(4), 2313–2320.
Toner, B., Manceau, A., Marcus, M. A., Millet, D. B., and Sposito, G. (2005). “Zinc sorption by a bacterial biofilm.” Environ. Sci. Technol., 39(21), 8288–8294.
van Hullebusch, E. D., Zandvoort, M. H., and Lens, P. N. (2003). “Metal immobilisation by biofilms: mechanisms and analytical tools.” Rev. Environ. Sci. Biotechnol., 2(1), 9–33.
Wanner, O., and Gujer, W. (1986). “A multispecies biofilm model.” Biotechnol. Bioeng., 28(3), 314–328.
Zhang, X., and Bishop, P. L. (2001). “Spatial distribution of extracellular polymeric substances in biofilms.” J. Environ. Eng., 850–856.
Information & Authors
Information
Published In
Journal of Environmental Engineering
Volume 142 • Issue 9 • September 2016
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Dec 12, 2014
Accepted: Sep 11, 2015
Published online: Dec 18, 2015
Discussion open until: May 18, 2016
Published in print: Sep 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.