Image Analysis of Floc Blanket Dynamics: Investigation of Floc Blanket Thickening, Growth, and Steady State
Publication: Journal of Environmental Engineering
Volume 140, Issue 4
Abstract
Floc blankets are fluidized, concentrated beds of particles utilized in some upflow sedimentation tank reactor configurations in water treatment. The presence of a floc blanket can significantly enhance removal of turbidity when coupled with lamellar sedimentation. Blanket dynamics have not been extensively studied, but are important for understanding blanket formation and operational control in full-scale water treatment plants. This research employed image analysis to reveal the temporal dynamics of floc blanket suspended solids concentration and floc-water interface height. Turbidity measurements were used to corroborate image analysis as a valid method for measuring solids concentration in the floc blanket and in the floc blanket supernatant. Observations from image analysis reveal relatively distinct stages in the creation of a floc blanket: thickening (increasing suspended solids concentration) in the absence of a floc-water interface, thickening with an interface, and steady state. Preliminary performance results suggest that turbidity removal is more significantly impacted by blanket concentration than blanket height. Two important factors were found to impact blanket dynamics during the interval when the height of the floc-water interface was increasing: (1) thickening, and (2) mass transfer between the supernatant above the floc-water interface and the floc blanket. Floc blanket thickening during formation has been confirmed to occur at both variable and constant interface upflow velocity. This observation suggests that floc properties (size and density) change during floc blanket formation.
Get full access to this article
View all available purchase options and get full access to this article.
References
AWWA/ASCE. (1990). Water treatment plant design, McGraw-Hill, New York.
Baldyga, J., Bourne, J. R., and Gholap, R. V. (1995). “The influence of viscosity on mixing in jet reactors.” Chem. Eng. Sci., 50(12), 1877–1880.
Chen, L., Lee, D.-J., and Chou, S.-S. (2006). “Charge reversal effect on blanket in full-scale floc blanket clarifier.” J. Environ. Eng., 1523–1526.
Chen, L., Sung, S., Lin, W., Lee, D.-J., Huang, C., and Juang, R. (2002). “Observations of blanket characteristics in full-scale floc blanket clarifiers.” Water Sci. Technol., 47(1), 197–204.
City of Ithaca. (2011). “Drinking water quality report.” Ithaca, NY.
Gould, B. (1969). “Sediment distribution in upflow.” Aust. J. Civ. Eng., 10(9), 27–29.
Gregory, R. (1979). “Floc blanket clarification.” Water Research Centre TR 111, Swindon, U.K.
Head, R., Hart, J., and Graham, N. (1997). “ Simulating the effect of blanket characteristics on the floc blanket clarification process.” Water Sci. Technol., 36(4), 77–82.
Hurst, M., Weber-Shirk, M., Charles, P., and Lion, L. (2014). “Apparatus for observation and analysis of floc blanket formation and performance.” J. Environ. Eng., 11–20.
Hurst, M. W., Weber-Shirk, M. L., and Lion, L. W. (2010). “Parameters affecting steady-state floc blanket performance.” J. Water Supply Res. Technol. Aqua., 59(5), 312–323.
Kelly, M. L., ed. (1998). Optimizing water treatment plant performance using the composite correction program handbook, USEPA, Cincinnati, OH.
LabVIEW version 13.1. [Computer software], National Instruments Corporation.
Lin, W., et al. (2004). “Treating high-turbidity water using full-scale floc blanket clarifiers.” J. Environ. Eng., 1481–1487.
Miller, D. G., and West, J. T. (1968). “Pilot plant studies of floc blanket clarification.” J. Am. Water Works Assoc., 60(2), 154–164.
Mohammadi, M. S. (2002). “A generalized refractive index equation for estimating the average particle size in colloidal suspensions.” J. Dispersion Sci. Technol., 23(5), 689–697.
Reynolds, T. D., and Richards, P. A. (1996). Unit operations and processes in environmental engineering, PWS Publishing, Boston.
Schulz, C. R., and Okun, D. A. (1984). Surface water treatment for communities in developing countries, Wiley, New York.
Su, S., Wu, R., and Lee, D. (2004). “Blanket dynamics in upflow suspended bed.” Water Res., 38(1), 89–96.
Sung, S., Lee, J., and Wu, R. (2005). “Steady-state solid flux plot of blanket in upflow suspended bed.” J. Chin. Inst. Chem. Eng., 36(4), 385–391.
Sung, S., Lin, W., Chen, L., and Lee, J. (2003). “Spatially stability of floc blanket in full-scale blanket clarifiers.” J. Chin. Inst. Chem. Eng., 34(6), 447–456.
Tchobanoglous, G., Burton, F. L., and Stensel, D. H. (2003). Wastewater engineering treatment and reuse, McGraw-Hill, New York.
Tse, I. C., Swetland, K., Weber-Shirk, M. L., and Lion, L. W. (2011). “Fluid shear influences on the performance of hydraulic flocculation systems.” Water Res., 45(17), 5412–5418.
Weber-Shirk, M. L. (2008). “An automated method for testing process parameters.” 〈http://confluence.cornell.edu/display/AGUACLARA/Process+Controller+Background〉 (Apr. 5, 2009).
Weber-Shirk, M. L., and Lion, L. W. (2010). “Flocculation model and collision potential for reactors with flows characterized by high Peclet numbers.” Water Res., 44(18), 5180–5187.
Information & Authors
Information
Published In
Journal of Environmental Engineering
Volume 140 • Issue 4 • April 2014
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Mar 4, 2013
Accepted: Dec 6, 2013
Published online: Feb 3, 2014
Published in print: Apr 1, 2014
Discussion open until: Jul 3, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.