Feasibility Study of As-Received and Modified (Dried/Baked) Water Treatment Plant Residuals for Use in Storm-Water Control Measures
Publication: Journal of Environmental Engineering
Volume 139, Issue 10
Abstract
Use of water treatment plant residuals (WTRs) in storm-water control measures (SCMs) is a sustainable alternative to landfill disposal of WTRs. However, research is needed to determine how effective WTR-amended SCMs would be in field-scale applications and what modifications can be implemented to improve performance. The modifications examined in this study were oven-drying (105°C) and baking (1,000°C) of the WTRs. Results showed that both modifications increase the hydraulic conductivity by two orders of magnitude. Dried WTRs showed no loss of phosphate removal potential compared to the as-received WTRs. Baking the WTRs lowered the phosphate removal potential but prevented manganese resuspension. The as-received WTRs, as well as both modifications, removed copper, lead, and zinc from storm-water runoff to below detection. Taken together, these results suggest that amending SCMs with modified WTRs has the potential to enhance the water quality improvement processes of SCMs while maintaining the infiltration capacity required for water quantity control.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Aqua Pennsylvania, Inc. provided part of the funding for this research and performed the ICP-MS metals analysis. The authors would also like to thank the Villanova Urban Stormwater Partnership (VUSP) partners for their support and Laura Nikkel-Dumyahn, Erica Forgione, Carli Joseph, and Isabel Sarriera for their assistance on this project.
References
Agyin-Birikorang, S., and O’Connor, G. A. (2007). “Lability of drinking water treatment residuals (WTR) immobilized phosphorus: Aging and pH effects.” J. Environ. Qual., 36(4), 1076–1085.
Asleson, B. C., Nestingen, R. S., Gulliver, J. S., Hozalski, R. M., and Nieber, J. L. (2009). “Performance assessment of rain gardens.” J. Am. Water Resour. Assoc., 45(4), 1019–1031.
ASTM. (2007a). “Standard test methods for particle size analysis of soils.”, West Conshohocken, PA.
ASTM. (2007b). “Standard test method for measurement of hydraulic conductivity of porous material using a rigid-wall, compaction-mold permeameter.”, West Conshohocken, PA.
ASTM. (2010a). “Standard test methods for specific gravity of soils solids by water pychnometer.”, West Conshohocken, PA.
ASTM. (2010b). “Standard test methods for liquid limit, plastic limit, and plasticity index of soils.”, West Conshohocken, PA.
ASTM. (2011). “Standard practice for classification of soils for engineering purposes (unified soil classification system).”, West Conshohocken, PA.
ASTM. (2012). “Standard test method for laboratory compaction characteristics of soil using standard effort.”, West Conshohocken, PA.
Babatunde, A. O., and Zhao, Y. Q. (2010). “Leachability and leaching patterns from aluminum-based water treatment residual used as media in laboratory-scale engineered wetlands.” Environ. Sci. Pollut. Resour., 17(7), 1314–1322.
Babatunde, A. O., Zhao, Y. Q., Burke, A. M., Morris, M. A., and Hanrahan, J. P. (2009). “Characterization of aluminum-based water treatment residual for potential phosphorus removal in engineered wetlands.” Environ. Pollut., 157(10), 2830–2836.
Batroney, T., Wadzuk, B. M., and Traver, R. G. (2010). “Parking deck’s first flush.” J. Hydrol. Eng., 15(2), 123–128.
Bayley, R. M., Ippolito, J. A., Stromberger, M. E., Barbarick, K. A., and Paschke, M. W. (2008). “Water treatment residuals and biosolids coapplications affect semiarid rangeland phosphorus cycling.” Soil Sci. Soc. Am. J., 72(3), 711–719.
Black and Veatch Corporation. (2011). White’s handbook of chlorination and alternative disinfectants, John Wiley and Sons, Hoboken, NJ.
Brown, S., et al. (2005). “An inter-laboratory study to test the availability of amendments to reduce the availability of Cd, Pb, and Zn in situ.” Environ. Pollut., 138(1), 34–45.
Cornwell, D. A., Vandermeyden, C., and Dillow, G. (1992). Landfilling of water treatment plant coagulant sludges, American Water Works Association Research Foundation, Denver.
Crittenden, J. C., et al. (2012). MWH’s water treatment principles and design, 3rd Ed., John Wiley & Sons, Hoboken, NJ.
Daniel, D. E., and Benson, C. H. (1990). “Water content-density criteria for compacted soil liners.” J. Geotech. Eng., 116(12), 1811–1830.
Davis, A. P., Hunt, W. F., Traver, R. G., and Clar, M. (2009). “Bioretention technology: Overview of current practice and future needs.” J. Environ. Eng., 135(3), 109–117.
Davis, M. L. (2011). Water and wastewater engineering: Design principles and practice, McGraw-Hill, New York.
DeWolfe, J. (2006). Water residuals to reduce soil phosphorus, American Water Works Association Research Foundation, Denver.
Dietz, M. E., and Clausen, J. C. (2006). “Saturation to improve pollutant retention in a rain garden.” Environ. Sci. Technol., 40(4), 1335–1340.
Elliott, H. A., O’Connor, G. A., Lu, P., and Brinton, S. (2002). “Influence of water treatment residuals on phosphorus solubility and leaching.” J. Environ. Qual., 31(4), 1362–1369.
Emerson, C. H., and Traver, R. G. (2008). “Multiyear and seasonal variation of infiltration from storm-water best management practices.” J. Irrig. Drain. Eng., 134(5), 598–605.
Freeze, R. A., and Cherry, J. A. (1979). Groundwater, Prentice-Hall, Edgewood Cliffs, NJ.
Graetz, D. A., and Nair, V. D. (2009). “Phosphorus sorption isotherm determination.” Southern cooperative series Bulletin No. 408, methods of phosphorus analysis for soils, sediments, residuals, and waters, 2nd Ed., J. L. Kovar and G. M. Pierzynski, eds., Virginia Tech Univ., Blacksburg, VA.
Grim, R. (1962). Applied clay mineralogy, McGraw-Hill, New York.
Haynes, W. M., ed. (2012). CRC handbook of chemistry and physics, 93rd Ed., CRC Press, Boca Raton, FL.
Hovsepyan, A., and Bonzongo, J. C. (2009). “Aluminum drinking water treatment residuals (Al-WTRs) as sorbent for mercury: Implications for soil remediation.” J. Hazard. Mater., 164(1), 73–80.
Hsieh, H., and Raghu, D. (1997). Criteria development for water treatment plant residual monofills, American Water Works Association Reasearch Foundation, Denver.
Hsieh, H., Raghu, D., and Tian, P. (2006). “Leaching studies on a model monofill of water treatment plant residuals.” Environ. Eng. Sci., 23(1), 230–238.
Hunt, W. F., Davis, A. P., and Traver, R. G. (2012). “Meeting hydrologic and water quality goals through targeted bioretention design.” J. Environ. Eng., 138(6), 698–707.
Hunt, W. F., Smith, J. T., Jadlocki, S. J., Hathaway, J. M., and Eubanks, P. R. (2008). “Pollutant removal and peak flow mitigation by a bioretention cell in urban Charlotte, N.C.” J. Environ. Eng., 134(5), 403–408.
Johnson, D. B. (1998). “Microorganisms and the biogeochemical cycling of metals in aquatic environments.” Metal metabolism in aquatic environments, W. J. Langston and M. J. Bebianno, eds., Chapman and Hall, London.
Komlos, J., and Traver, R. (2012). “Long term orthophosphate removal in a field-scale stormwater bioinfiltration rain garden” J. Environ. Eng., 138(10), 991–998.
Li, H., and Davis, A. P. (2008). “Heavy metal capture and accumulation in bioretention media.” Environ. Sci. Technol., 42(14), 5247–5253.
Lombi, E., Stevens, D. P., and Mclaughlin, M. J. (2010). “Effect of water treatment residuals on soil phosphorus, copper, and aluminum availability and toxicity.” Environ. Pollut., 158(6), 2110–2116.
Makris, K. C., Sarkar, D., and Datta, R. (2006). “Aluminum-based drinking-water treatment residuals: a novel sorbent for perchlorate removal.” Environ. Pollut., 140(1), 9–12.
Mishra, D., Anand, S., Panda, R. K., and Das, R. P. (2000). “Hydrothermal preparation and characterization of boehmites.” Mater. Lett., 42(1–2), 38–45.
Mortula, M., Bard, S. M., Walsh, M. E., and Gagnon, G. A. (2009). “Aluminum toxicity and ecological risk assessment of dried alum residual into surface water disposal.” Can. J. Civ. Eng., 36(1), 127–136.
Okada, K., Nagashima, T., Kameshima, Y., Yasumori, A., and Tsukada, T. (2002). “Relationship between formation conditions, properties and crystallite size of boehmite.” J.Colloid Interface Sci., 253(2), 308–314.
O’Neill, S. W., and Davis, A. P. (2012). “Water treatment residual as a bioretention amendment for phosphorus. 1. Evaluation studies.” J. Environ. Eng., 138(3), 318–327.
Roy, M., and Couillard, D. (1998). “Metal leaching following sludge application to a deciduous forest soil.” Water Res., 32(5), 1642–1652.
Sanin, F. D., Clarkson, W. W., and Vesilind, P. A. (2011). Sludge engineering: The treatment and disposal of wastewater sludges, DEStech Publications, Lancaster, PA.
Sarkar, D., Quazi, S., Makris, K. C., Datta, R., and Khairom, A. (2007). “Arsenic bioaccessibility in a soil amended with drinking-water treatment residuals in the presence of phosphorus fertilizer.” Arch. Environ. Contam. Toxicol., 53(3), 329–336.
Stobbe, E. R., de Boer, B. A., and Geus, J. W. (1999). “The reduction and oxidation behavior of manganese oxides.” Catal. Today, 47(1–4), 161–167.
Sujana, M. G., Thakur, R. S., and Rao, S. B. (1998). “Removal of fluoride from aqueous solution by using alum sludge.” J. Colloid Interface Sci., 206(1), 94–101.
Tchobanoglous, G., Burton, F. L., and Stensel, H. D., eds., (2003). Wastewater engineering treatment and reuse, 4th Ed., McGraw-Hill, New York.
Tettenhorst, R. D., and Hofmann, D. A. (1980). “Crystal chemistry of boehmite.” Clays Clay Miner., 28(5), 373–380.
Tsukada, T., Segawa, H., Yasumori, A., and Okada, K. (1999). “Crystallinity of boehmite and its effect on the phase transition temperature of alumina.” J. Mater. Chem., 9(2), 549–553.
U.S. EPA. (1994). “Determination of trace elements in waters and wastes by inductively coupled plasma - mass spectrometry, revision 5.4.” 200.8, Cincinnati, OH.
Weiss, J., Hondzo, M., Biesboer, D., and Semmens, M. (2006). “Laboratory of heavy metal phytoremediation by three wetland macrophytes.” Int. J. Phytorem., 8(3), 245–259.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Jan 24, 2013
Accepted: May 15, 2013
Published online: May 17, 2013
Published in print: Oct 1, 2013
Discussion open until: Oct 17, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.