Adaptive Time Stepping–Operator Splitting Strategy to Couple Implicit Numerical Hydrodynamic and Water Quality Codes
This article has a reply.
VIEW THE REPLYThis article has a reply.
VIEW THE REPLYPublication: Journal of Environmental Engineering
Volume 138, Issue 9
Abstract
Hydrodynamic and water quality codes have been frequently linked. These have typically been linked with both the hydrodynamic and water quality models using similar explicit time steps, but for long-term simulations implicit models are required. The water quality codes linked to these hydrodynamic codes are forced to perform their computations using the hydrodynamic time step even though utilizing the same might result in drifting of the water quality solution. This technical note presents the development and testing of an operator splitting–derived method for linking hydrodynamic and water quality codes with adaptive time stepping. The resulting method provides high-fidelity solutions that compare well with analytic solutions and lends itself for extension to various other transported quantities.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The experiments described and the results presented were obtained from research sponsored by the System Wide Water Resources Program (SWWRP) of the U.S. Army Engineer Research and Development Center, Coastal and Hydraulics Laboratory. Permission was granted by the Chief of Engineers to publish this information.
References
Atkinson, J. F., Gupta, S. K., DePinto, J. V., and Rumer, R. R. (1998). “Linking hydrodynamic and water quality models with different scales.” J. Environ. Eng., 124(5), 399–408.
Berger, R. C., and Howington, S. E. (2002). “Discrete fluxes and mass balance in finite elements.” J. Hydraul. Eng., 128(1), 87–92.
Berger, R. C., and Stockstill, R. L. (1995). “Finite-element model for high-velocity channels.” J. Hydraul. Eng., 121(10), 710–716.
Bui, T. (1979). “Some A-stable and L-stable methods for the numerical integration of stiff ordinary differential equations.” J. Assoc. Comput. Mach., 26(3), 483–493.
Cash, J. R., and Karp, A. H. (1990). “A variable order Runge-Kutta method for initial value problems with rapidly varying right-hand sides.” Trans. Math. Software, 16(3), 201–222.
Cerco, C. F., and Cole, T. (1993). “Three-dimensional eutrophication model of Chesapeake Bay.” J. Environ. Eng., 119(6), 1006–1025.
Fehlberg, E. (1969). “Low-order classical Runge-Kutta formulas with step size control and their application to some heat transfer problems.”, National Aeronautics and Space Administration, Washington, DC.
Johnson, B. E., Gerald, T. K., and Zhang, Z. (2008). ”System wide water resources program nutrient sub-model (SWWRP-NSM) version 1.1.”, U.S. Army Corps of Engineers, Engineer Research and Development Center, Vicksburg, Mississippi.
Luang, W. S., and Hwang, C. C. (1989). “Integrating hydrodynamics and water quality models for patuxent estuary.” Estuarine and Coastal Modeling, ASCE, Reston, VA, 420–429.
Martin, S., Savant, G., and McVan, Darla. (2010). “Lake borgne surge barrier study.”, U.S. Army Corps of Engineers Engineer Research and Development Center, Vicksburg, Mississippi.
Press, W. H., Teukolsky, S. L., Vetterling, W. T., and Flannery, B. C. (1992). Numerical recipes in C: The art of scientific computing, 2nd Ed., Cambridge Univ. Press, Cambridge, U.K.
Prokopakis, G. J., and Selder, W. D. (1981). “Adaptive semi-implicit Runge-Kutta method for solution of stiff ordinary differential equations.” Ind. Eng. Chem. Fundam., 20(3), 255–266.
Rinaldi, S., and Soncini-Sessa, R. (1977). “Sessitivity analysis of Streeter-Phelps models.” International Institute for Applied Systems Analysis, Laxenburg, Austria.
Savant, G., Berger, C., McAlpin, T., and Tate, J. (2011). “Efficient implicit finite-element hydrodynamic model for dam and levee breach.” J. Hydraul. Eng., 137(9), 1005–1018.
Xia, M.,et al. (2010). “Influence of physical forcing on bottom-water dissolved oxygen within Caloosahatchee River Estuary, Florida.” J. Environ. Eng., 136(10), 1032–1044.
Zhu, Z., Shi, R., Cheng, C., and Kuh, E. (2006). “An unconditional stable general operator-splitting method for transistor level transient analysis.” Proc., 2006 Asia and South Pacific Design Automation Conference, 428–433.
Zou, R., Carter, S., Shoemaker, L., Parker, A., and Henry, T. (2006). “Integrated hydrodynamic and water quality modeling system to support nutrient total maximum daily load development for Wissahickon Creek, Pensylvania.” J. Environ. Eng., 132(4), 555–566.
Information & Authors
Information
Published In
Copyright
© 2012 American Society of Civil Engineers.
History
Received: Jul 15, 2011
Accepted: Feb 2, 2012
Published online: Feb 6, 2012
Published in print: Sep 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.