UV Dose-Response Behavior of Air-Exposed Microorganisms
Publication: Journal of Environmental Engineering
Volume 138, Issue 7
Abstract
Laboratory experiments were performed to demonstrate an experimental method for measuring the UV dose-response behavior among air-exposed microorganisms, and to quantify the effect of relative humidity on this behavior. These experiments included two nonpathogenic microorganisms as surrogates for airborne microbial pathogens: Bacillus subtilis spores and coliphage MS2. UV dose-response behavior of these microorganisms was measured as a function of relative humidity (RH). Microorganisms were transferred to membrane filters at less than monolayer coverage and were subjected to exposure to UV radiation delivered from a collimated beam to a planar surface in a humidity-controlled environment at two germicidally active wavelengths: 254 nm and 282 nm. Dose-response data for Bacillus subtilis spores and coliphage MS2 exposed to UV radiation were fit to the Phenotypic Persistence and External Shielding (PPES) model. B. subtilis spores showed a modest effect of RH on the UV dose-response behavior, whereas essentially no effect of RH was evident for air-exposed MS2 for their UV dose-response behavior at 254 nm or 282 nm.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was funded by the NASA Specialized Center for Research and Training (NSCORT).
References
Anderson, J. D., and Dark, F. A. (1967). “Studies on the effects of aerosolization on the rates of efflux of ions from populations of Escherichia coli strain B.” J. Gen. Microbiol., 46, 95–105.
ASTM. (2007). “Standard practice for maintaining constant relative humidity by means of aqueous solutions.” E104, West Conshohocken, PA.
American Type Culture Collection (ATCC). (2005). Product information sheet for coliphage MS2, Manassas, VA.
Blatchley, E. R. III (1997). “Numerical modelling of UV intensity: Application to collimated-beam reactors and continuous-flow systems.” Water Res.WATRAG, 31(9), 2205–2218.
et al. and Blatchley, E., R. III (2006). “Dyed microspheres for quantification of UV dose distributions: Photochemical reactor characterization by Lagrangian actinometry.” J. Environ. Eng.JOEEDU, 132(11), 1390–1403.
et al. and Blatchley, E. R. III (2008). “Validation of large-scale, monochromatic UV disinfection systems for drinking water using dyed microspheres.” Water Res.WATRAG, 42(3), 677–688.
Bolton, J. R., and Linden, K. G. (2003) “Standardization of methods for fluence (UV dose) determination in bench-scale UV experiments.” J. Environ. Eng.JOEEDU, 129(3), 209–215.
Chiu, K., Lyn, D. A., Savoye, P., and Blatchley, E. R. III (1999a). “Integrated UV disinfection model based on particle tracking.” J. Environ. Eng.JOEEDU, 125(1), 7–16.
Chiu, K., Lyn, D. A., Savoye, P., and Blatchley, E. R. III (1999b). “Effect of UV system modifications on disinfection performance.” J. Environ. Eng.JOEEDU, 125(5), 459–469.
Cox, C. S. (1993). “Roles of water molecules in bacteria and viruses.” Orig. Life and Evol. Biosph., 23(1), 29–36.
Downes, A., and Blunt, T. (1877). “Research on the effect of light upon bacteria and other organisms.” Proc. R. Soc. London, 26(179–184), 488–500.
Ehrlich, R., Miller, S., and Idoine, L. S. (1964). “Effects of environmental factors on the survival of airborne coliphage.” Appl. Microbiol.APMBAY, 12(6), 479–482.
Janex, M. L., Savoye, P., Do-Quang, Z., Blatchley, E., and Laine, J. M. (1998). “Impact of water quality and reactor hydrodynamics on wastewater disinfection by UV, use of CFD modeling for performance optimization.” Water Sci. Technol.WSTED4, 38(6), 71–77.
Ke, Q. S., Craik, S. A., El-Din, M. G., and Bolton, J. R. (2009). “Development of a protocol for the determination of the ultraviolet sensitivity of microorganisms suspended in air.” Aerosol Sci. Technol.ASTYDQ, 43(4), 284–289.
Lim, S., and Blatchley, E. R. III (2009). “UV disinfection system for cabin air.” Adv. Space Res.ASRSDW, 44(8), 942–948.
Lin, C. Y., and Li, C. S. (2002). “Control effectiveness of ultraviolet germicidal irradiation on bioaerosols.” Aerosol Sci. Technol.ASTYDQ, 36(4), 474–478.
Liu, D., Wu, C., Linden, K., and Ducoste, J. (2007). “Numerical simulation of UV disinfection reactors: Evaluation of alternative turbulence models.” Appl. Math. Modell.AMMODL, 31(9), 1753–1769.
Lyn, D. A., and Blatchley, E. R. III (2005). “Numerical computational fluid dynamics-based models of ultraviolet disinfection channels.” J. Environ. Eng.JOEEDU, 131(6), 838–849.
Lyn, D. A., Chiu, K., and Blatchley, E. R. III (1999). “Numerical modeling of flow and disinfection in UV disinfection channels.” J. Environ. Eng.JOEEDU, 125(1), 17–26.
Mamane-Gravetz, H., Linden, K. G., Cabaj, A., and Sommer, R. (2005). “Spectral sensitivity of Bacillus subtilis spores and MS2 coliphage for validation testing of ultraviolet reactors for water disinfection.” Environ. Sci. Technol.ESTHAG, 39(20), 7845–7852.
Maillard, J. Y., Beggs, T. S., Day, M. J., Hudson, R. A., and Russell, A. D. (1994). “Effects of biocides on MS2 and K coliphages.” Appl. Environ. Microbiol.AEMIDF, 60(6), 2205–2206.
Naunovic, Z., Lim, S., and Blatchley, E. R. III (2008). “Investigation of microbial inactivation efficiency of a UV disinfection system employing an excimer lamp.” Water Res.WATRAG, 42(19), 4838–4846.
Nicholson, W. L., Munakata, N., Horneck, G., Melosh, H. J., and Setlow, P. (2000). “Resistance of Bacillus endospores to extreme terrestrial and extraterrestrial environments.” Microbiol. Mol. Biol. Rev.MMBRF7, 64(3), 548–572.
Noakes, C. J., Beggs, C. B., and Sleigh, P. A. (2004a). “Modelling the performance of upper room ultraviolet germicidal irradiation devices in ventilated rooms: Comparison of analytical and CFD methods.” Indoor Built Environ.IBENFP, 13(6), 477–488.
Noakes, C. J., Fletcher, L. A., Beggs, C. B., Sleigh, P. A., and Kerr, K. G. (2004b). “Development of a numerical model to simulate the biological inactivation of airborne microorganisms in the presence of ultraviolet light.” J. Aerosol Sci.JALSB7, 35(4), 489–507.
Noakes, C. J., Sleigh, P. A., Fletcher, L. A., and Beggs, C. B. (2006). “Use of CFD modelling to optimise the design of upper-room UVGI disinfection systems for ventilated rooms.” Indoor Built Environ.IBENFP, 15(4), 347–356.
Peccia, J., Werth, H. M., Miller, S., and Hernandez, M. (2001). “Effects of relative humidity on the ultraviolet induced inactivation of airborne bacteria.” Aerosol Sci. Technol.ASTYDQ, 35(3), 728–740.
Pennell, K. G., Aronson, A. I., and Blatchley, E. R. III (2008). “Phenotypic persistence and external shielding (PPES) ultraviolet radiation inactivation kinetic model.” J. Appl. Microbiol.JAMIFK, 104(4), 1192–1202.
Riley, R. L., and Kaufman, J. E. (1972). “Effect of relative humidity on the inactivation of airborne Serratia marcescens by ultraviolet radiation.” Appl. Microbiol.APMBAY, 23(6), 1113–1120.
Roux, E. (1887). “De l’action de-la lumiere et de l’air sur les spores de la bactkridie du charbon.” Ann. inst. Pasteur, 1, 445–452.
Ryan, K., McCabe, K., Clements, N., Hernandez, M., and Miller, S. L. (2010). “Inactivation of airborne microorganisms using novel ultraviolet radiation sources in reflective flow-through control devices.” Aerosol Sci. Technol., 44(7), 541–550.ASTYDQ
Schaeffer, A. B., and Fulton, M. A. (1933). “A simplified method of staining endospores.” ScienceSCIEAS, 77, 194.
Setlow, P. (2006). “Spores of Bacillus subtilis: their resistance to and killing radiation, heat and chemicals.” J. Appl. Microbiol.JAMIFK, 101(3), 514–525.
Severin, B. F., Suidan, M. T., and Engelbrecht, R. S. (1983). “Kinetic modeling of U.V. disinfection of water.” Water Res.WATRAG, 17(11), 1669–1678.
Shen, C., et al. (2009). “Validation of medium-pressure UV disinfection reactors by Lagrangian actinometry using dyed microspheres.” Water Res.WATRAG, 43(5), 1370–1380.
Sozzi, D. A., and Taghipour, F. (2006). “UV reactor performance modeling by Eulerian and Lagrangian methods.” Environ. Sci. Technol.ESTHAG, 40(5), 1609–1615.
Tseng, C. C., and Li, C. S. (2005). “Inactivation of virus-containing aerosols by ultraviolet germicidal irradiation.” Aerosol Sci. Technol.ASTYDQ, 39(12), 1136–1142.
Walker, C. M., and Ko, G. (2007). “Effect of ultraviolet germicidal irradiation on viral aerosols.” Environ. Sci. Technol.ESTHAG, 41(15), 5460–5465.
Wols, B. A., Uijttewaal, W. S. J., Hofman, J. A. M. H., Rietveld, L. C., and van Dijk, J. C. (2010). “The weaknesses of a k-epsilon model compared to a large-eddy simulation for the prediction of UV dose distributions and disinfection.” Chem. Eng. J.CMEJAJ, 162(2), 528–536.
Zajic, J. E., Inculet, I. I., and Martin, P. (1982). “Basic concepts in microbial aerosols.” In Space and terrestrial biotechnology, Fisher, A., ed., Springer, Berlin, 51–91.
Information & Authors
Information
Published In
Journal of Environmental Engineering
Volume 138 • Issue 7 • July 2012
Pages: 780 - 785
Copyright
© 2012. American Society of Civil Engineers.
History
Received: Jan 13, 2011
Accepted: Jan 10, 2012
Published online: Jan 12, 2012
Published in print: Jul 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.