Enhanced Filter Performance by Fluidized-Bed Pretreatment with : Observations and Model Simulation
Publication: Journal of Environmental Engineering
Volume 138, Issue 4
Abstract
Fluidized-bed pretreatment of a rapid sand filter with alum [] has been shown to significantly improve performance during the initial portion of filter operation. Two alternative mechanisms are hypothesized by which alum pretreatment acts to improve particle removal: (1) coats the sand filter medium, and alters its porosity. (2) Precipitated embedded within the media pores acts as an additional filter medium that increases the particle capture efficiency. Conceptual models for these two mechanisms are developed and compared with experimental data for particle removal and head loss. Model predictions indicate that particle removal by filtration through flocs is the mechanism that significantly enhances the filter performance.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The research described in this paper was supported by the U.S. National Science Foundation under Grant CBET-0604566 and by the Sanjuan Foundation.
References
American Water Works Association. (1999). Water Quality and Treatment: A handbook of community water supplies, 5th Ed., Letterman, R. D., ed., McGraw-Hill, New York.
Carman, P. C. (1937). “Fluid flow through granular beds.” Chemical Engineering Research and Design, 15, 150–166CERDEE.
Cranston, K. O., and Amirtharajah, A. (1987). “Improving the initial effluent quality of a dual-media filter by coagulants in backwash.” J. Am. Water Works Assn.JAWWA5, 79(12), 50–63.
Duan, J., and Gregory, J. (2003). “Coagulation by hydrolysing metal salts.” Adv. Colloid Interface Sci., 100–102, 475–502.ACISB9
Elimelech, M., and O’Melia, C. R. (1990). “Kinetics of deposition of colloidal particles in porous media.” Environ. Sci. Technol., 24(10), 1528–1536.ESTHAG
François, R. J., and Van Haute, A. A. (1985). “Backwashing and conditioning of a deep bed filter.” Water Res., 19(11), 1357–1362.WATRAG
Lin, P.-H., Lion, L. W., and Weber-Shirk, M. L. (2011). “Comparison of the ability of three coagulants to enhance filter performance.” J. Environ. Eng., 137(5), 371–376.JOEEDU
Lin, P.-H., Lion, L. W., and Weber-Shirk, M. L. (2012). “Enhanced particle capture through aluminum hydroxide addition to pores in sand media.” J. Environ. Eng., 138(1), 8–16.JOEEDU
O’Melia, C. R. (1980). “ES&T features: Aquasols: The behavior of small particles in aquatic systems.” Environ. Sci. Technol., 14(9), 1052–1060.ESTHAG
Pernitsky, D. J., and Edzwald, J. K. (2006). “Selection of alum and polyaluminum coagulants: Principles and applications.” J. Water Supply: Res. Technol. AQUAJWSAFA, 55(2), 121–142.
Scholtz, E. C., Feldkamp, J. R., White, J. L., and Hem, S. L. (1985). “Point of zero charge of amorphous aluminum hydroxide as a function of adsorbed carbonate.” J. Pharm. Sci., 74(4), 478–481.JPMSAE
Tufenkji, N., and Elimelech, M. (2004). “Correlation equation for predicting single-collector efficiency in physicochemical filtration in saturated porous media.” Environ. Sci. Technol., 38(2), 529–536.ESTHAG
Yao, K.-M., Habibian, M. T., and O'Melia, C. R. (1971). “Water and waste water filtration. Concepts and applications.” Environ. Sci. Technol., 5(11), 1105–1112.ESTHAG
Yapijakis, C. (1982). “Direct filtration: Polymer in backwash serves dual purpose.” J. Am. Water Works Assn.,JAWWA5 74(8), 426–428.
Information & Authors
Information
Published In
Copyright
© 2012. American Society of Civil Engineers.
History
Received: Jan 25, 2011
Accepted: Sep 16, 2011
Published online: Sep 19, 2011
Published in print: Apr 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.