Thermochemical and Cyclability Analyses of the Absorption Process on a Ca/Al Layered Double Hydroxide
Publication: Journal of Environmental Engineering
Volume 137, Issue 11
Abstract
Hydrocalumite () was synthesized by precipitation and thermally activated at 300 and 550°C. Its chemisorption capacity was evaluated and compared with that of calcium oxide (CaO). Initial thermal analyses showed that CaAl-550 sample has better properties as sorbent than CaO, evaluated under similar conditions. It was determined that both materials (CaAl-550 and CaO) have similar kinetic behavior, and the presence of on the CaAl-550 sample did not reduce or interfere with the capture. Moreover, when the absorption-desorption cyclability was analyzed, the CaAl-550 sample apparently possessed better capture efficiency and thermal stability than CaO. In fact, different characterization analyses (nuclear magnetic resonance and scanning electron microscopy ) suggest that capture efficiency and thermal stability observed on the CaAl-550 sample can be attributed to the aluminum presence, as .
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Authors thank the technical assistance of A. Tejeda, G. Zedillo, and O. Novelo. This work was performed into the PUNTA-IMPULSA framework and financially supported by UNSPECIFIEDICyT-DF-179/2009 and UNSPECIFIEDCONACyT-60980 projects.
References
Alcérreca-Corte, I., Fregoso-Israel, E., and Pfeiffer, H. (2008). “ absorption on : A kinetic analysis of the chemisorption and diffusion processes.” J. Phys. Chem. C, 112(16), 6520–6525.
Ávalos-Rendón, T., Casa-Madrid, J., and Pfeiffer, H. (2009). “Thermochemical capture of carbon dioxide on lithium aluminates ( and ): A new option for the absorption.” J. Phys. Chem. A, 113(25), 6919–6923.
Bhatia, S. K., and Perlmutter, D. D. (1983). “Effect of the product layer on the kinetics of the -lime reaction.” AlChE J., 29, 79–86.
Chen, J., Loo, L. S., and Wang, K. (2008). “High-pressure adsorption on a polymer-derived carbon molecular sieve.” J. Chem. Eng. Data, 53(1), 2–4.
Chen, Y. T., Karthik, M., and Bai, H. (2009). “Modification of CaO by organic alumina precursor for enhancing cyclic capture of greenhouse gas.” J. Environ. Eng., 135(6), 459–464.
Choi, S., Drese, J. H., and Jones, C. W. (2009). “Adsorbent materials for carbon dioxide capture from large anthropogenic point sources.” ChemSusChem, 2, 796–854.
Cisneros, R., Pfeiffer, H., and Wang, C. (2010). “Oxygen absorption in free-standing porous silicon: A structural, optical and kinetic analysis.” Nano. Res. Lett., 5(4), 686–691.
Díaz, E., Muñoz, E., Vega, A., and Ordónez, S. (2008). “Enhancement of the retention capacity of X zeolites by Na- and Cs-treatments.” Chemosphere, 70(8), 1375–1382.
Florin, N. H., and Harris, A. T. (2009). “Reactivity of CaO derived from nano-sized particles through multiple capture-and-release cycles.” Chem. Eng. Sci., 64(2), 187–191.
Friedmann, S. J. (2007). “Geological carbon dioxide sequestration.” Elements, 3, 179–184.
Fyfe, C. A., et al. (1985). “Detailed interpretation of the and high-field MAS NMR spectra of zeolites offretite and omega.” Zeolites, 5(3), 179–186.
Kirkpatrick, R. J., Yu, P., Hou, H., and Kim, Y. (1999). “Interlayer structure, anion dynamics, and phase transitions in mixed-metal layered hydroxides: Variable temperature NMR spectroscopy of hydrotalcite and Ca-aluminate hydrate (hydrocalumite).” Am. Mineral., 84, 1186–1190.
Li, Z. S., Fang, F., and Cai, N. S. (2009). “ capture from flue gases using three Ca-based sorbents in a fluidized bed reactor.” J. Environ. Eng., 135(6), 418–425.
Lima, E., Laspéras, M., de Ménorval, L. C., Tichit, D., and Fajula, F. (2004). “Characterization of basic catalysts by the use of nitromethane as NMR probe molecule and reactant.” J. Catal., 223(1), 28–35.
Lippmaa, E., Samoson, A., and Magi, M. (1986). “High-resolution aluminum-27 NMR of aluminosilicates.” J. Am. Chem. Soc., 108(8), 1730–1735.
Liu, W., Low, N. W. L., Feng, B., Wang, G., and Da Costa, J. D. (2010). “Calcium precursors for the production of CaO sorbents for multicycle capture.” Environ. Sci. Technol., 44(2), 841–847.
Lisbona, P., Martínez, A., Lara, Y., and Romeo, L. M. (2010). “Integration of carbonate capture cycle and coal-fired power plants. A comparative study of different sorbents.” Energy Fuels, 24(1), 728–736.
Lu, H., Reddy, E. P., and Smirniotis, G. (2006). “Calcium oxide based sorbents for capture of carbon dioxide at high temperatures.” Ind. Eng. Chem. Res., 45(11), 3944–3949.
Lu, D. Y., Hughes, R. W., Anthony, E. J., and Manovic, V. (2009). “Sintering and reactivity of -based sorbents for in situ capture in fluidized beds under realistic calcination conditions.” J. Environ. Eng., 135(6), 404–410.
Lwin, Y., and Abdullah, F. (2009). “High temperature adsorption of carbon dioxide on Cu–Al hydrotalcite-derived mixed oxides: Kinetics and equilibria by thermogravimetry.” J. Therm. Anal. Calorim., 97(3), 885–889.
Macario, A., Katovic, A., Giordano, G., Iucolano, F., and Caputo, D. (2005). “Synthesis of mesoporous materials for carbon dioxide sequestration.” Microporous Mesoporous Mater., 81(1-3), 139–147.
Maceiras, R., Alves, S. S., Cancela, M. A., and Alvarez, E. (2008). “Effect of bubble contamination on gas-liquid mass transfer coefficient on absorption in amine solutions.” Chem. Eng. J., 137(2), 422–427.
Manovic, V., and Anthony, E. J. (2009). “CaO-based pellets supported by calcium aluminate cements for high-temperature capture.” Environ. Sci. Technol., 43(18), 7117–7122.
Manovic, V., and Anthony, E. J. (2010). “ carrying behavior of calcium aluminate pellets under high-temperature/high- concentration calcination conditions.” Ind. Eng. Chem. Res., 49, 6919–6922.
Martavaltzi, C. S., and Lemonidou, A. A. (2008a). “Development of new CaO based sorbent materials for removal at high temperature.” Microporous Mesoporous Mater., 110(1), 119–127.
Martavaltzi, C. S., and Lemonidou, A. A. (2008b). “Parametric study of the synthesis with respect to high sorption capacity and stability on multicycle operation.” Ind. Eng. Chem. Res., 47(23), 9537–9543.
Mosqueda, H. A., Vazquez, C., Bosch, P., and Pfeiffer, H. (2006). “Chemical sorption of carbon dioxide () on lithium oxide ().” Chem. Mater., 18(9), 2307–2310.
Nair, B. N., Yamaguchi, T., and Kawamura, H. (2004). “Processing of lithium zirconate for applications in carbon dioxide separation: Structure and properties of the powders.” J. Am. Ceram. Soc., 87(1), 68–74.
Nair, B. N., Burwood, R. P., Goh, V. J., Nakagawa, K., and Yamaguchi, T. (2009). “Lithium based ceramic materials and membranes for high temperature separation.” Prog. Mater. Sci., 54(5), 511–541.
Nomura, K., Tokumistu, K., Hayakawa, T., and Homonnay, Z. (2000). “The influence of mechanical treatment on the absorption of by perovskite oxides.” J. Radiol. Nucl. Chem., 246(1), 69–77.
Ochoa-Fernández, E., Zhao, T., Rønning, M., and Chen, D. (2009). “Effects of steam addition on the properties of high temperature ceramic acceptors.” J. Environ. Eng., 135(6), 397–403.
Palacios-Romero, L. M., Lima, E., and Pfeiffer, H. (2009). “Structural analysis and chemisorption study on non-stoichiometric lithium cuprates ().” J. Phys. Chem. A, 113(1), 193–198.
Park, S. W., Cho, H. B., and Sohn, I. (2002). “ absorption into w/o emulsion with aqueous amine liquid droplets.” J. Sep. Sci., 37, 639–661.
Pawlesa, J., Zukal, A., and Cejka, J. (2007). “Synthesis and adsorption investigations of zeolites MCM-22 and MCM-49 modified by alkali metal cations.” Adsorp. J. Int. Adsorp. Soc., 13, 257–265.
Preda, G., Pacchioni, G., Chiesa, M., and Giamello, E. (2009). “The reactivity of with K atoms adsorbed on MgO.” Phys. Chem. Chem. Phys., 11(37), 8156–8164.
Rodriguez, N., Alonso, M., Grasa, M., and Abanades, J. C. (2008). “Heat requirements in a calciner of integrated in a capture system using CaO.” Chem. Eng. J., 138(1-3), 148–154.
Romeo, L. M., Bolea, I., and Escosa, J. M. (2008). “Integration of power plant and amine scrubbing to reduce capture costs.” Appl. Therm. Eng., 28(8-9), 1039–1046.
Rouquerol, F., Rouquerol, J., and Sing, K. (1999). Adsorption by powders and porous solids: Principles, methodology and applications, Academic Press, 97.
Segni, R., Allali, N., Vieille, L., Taviot-Guého, C., and Leroux, F. (2006). “Hydrocalumite-type materials: 2. Local order into in temperature studied by X-ray absorption and Mössbauer spectroscopies.” J. Phys. Chem. Solids, 67(5-6), 1043–1047.
Seo, Y., Jo, S. H., Ryu, C. K., and Yi, C. K. (2009). “Effect of reaction temperature on capture using potassium-based solid sorbent in bubbling fluidized-bed reactor.” J. Environ. Eng., 135(6), 473–477.
Wu, S. F., Li, Q. H., Kim, J. N., and Yi, K. B. (2008). “Properties of a nano sorbent.” Ind. Eng. Chem. Res., 47(1), 180–184.
Yang, Z. H., Zhao, M., Florin, N. H., and Harris, A. T. (2009). “Synthesis and characterization of CaO nanopods for high temperature capture.” Ind. Eng. Chem. Res., 48(24), 10765–10770.
Yavuz, C. T., et al. (2009). “Markedly improved capture efficiency and stability of gallium substituted hydrotalcites at elevated temperatures.” Chem. Mater., 21(15), 3473–3475.
Information & Authors
Information
Published In
Copyright
© 2011 American Society of Civil Engineers.
History
Received: Jun 1, 2010
Accepted: May 17, 2011
Published online: May 18, 2011
Published in print: Nov 1, 2011
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.