Modeling the Relationship between Capillary Suction Time and Specific Resistance to Filtration
Publication: Journal of Environmental Engineering
Volume 136, Issue 9
Abstract
The capillary suction time (CST) and the specific resistance to filtration (SRF) tests are both commonly used to estimate sludge dewaterability. Both tests are known to be empirically related but the SRF is much more expensive and time consuming compared with the CST test. The aim of this study was therefore to develop a prediction methodology to obtain SRF test results from the data generated by CST tests under different experimental conditions. This study is based on empirical data sets linking CST with SRF. The prediction equations were developed by first estimating filterability from CST values and then relating it with SRF values using regression analyses. The relationships between the results of the CST and SRF tests were best described using an empirical model, which incorporated logarithmic and squared terms to account for the nonlinear relationship between filterability, total suspended solids, and temperature. The findings were statistically significant and the model satisfied all the statistical assumptions. Therefore, the model can be used to predict SRF from CST values.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers wish to acknowledge the financial support received from Triton Electronics and The University of Edinburgh.
References
Anderson, T. W., and Darling, D. A. (1952). “Asymptotic theory of certain ‘goodness-of-fit’ criteria based on stochastic processes.” Ann. Math. Stat., 23(2), 193–212.
Ayol, A., and Dentel, S. K. (2005). “Enzymatic treatment effects on dewaterability of anaerobically digested biosolids: Laboratory characterizations of drainability and filterability.” Process Biochem. (Oxford, U.K.), 40(7), 2435–2442.
Cetin, F. D., and Sürücü, G. (1989). “Effects of temperature and pH on the physical properties of activated sludge flocs.” Int. J. Environ. Stud., 34(3), 189–199.
Chatterjee, S., Hadi, A., and Price, B. (2000). Regression analysis by example, 3rd Ed., Wiley, New York.
Christensen, G. L., and Dick, R. I. (1985). “Specific resistance measurements: Nonparabolic data.” J. Environ. Eng., 111(3), 243–257.
Christensen, J. R., Sorensen, P. B., Christensen, G. L., and Hansen, J. A. (1993). “Mechanisms for overdosing in sludge conditioning.” J. Environ. Eng., 119(1), 159–171.
Dursun, D., Ayol, A., and Dentel, S. K. (2004). “Physical characteristic of a waste activated sludge: Conditioning responses and correlations with a synthetic surrogate.” Water Sci. Technol., 50(9), 129–136.
El Shafei, M. M., Ibrahim, M. S., and Abadir, M. F. (2005). “Effect of temperature on flow properties of digested waste water sludge.” Proc., 9th Int. Water Technol. Conf., Egyptian Water Technology Association, Alexandria, Egypt, 1207–1214.
Guan, J., Amal, R., and Waite, T. D. (2003). “Effect of floc size and structure on biosolid capillary suction time.” Water Sci. Technol., 47(12), 255–260.
Hwa, T. J., and Jayeaseelan, S. (1997). “Conditioning of oily sludges with municipal solid wastes incinerator fly ash.” Water Sci. Technol., 35(8), 231–238.
Ives, J. K. (1978). “The scientific basis of flocculation.” Experimental methods 1, Kluwer Academic, Alphen aan den Rijn, The Netherlands, 131–163.
Lee, D. J., and Hsu, Y. H. (1993). “Cake formation in capillary suction apparatus.” Ind. Eng. Chem. Res., 32(6), 1180–1185.
Lee, D. J., and Hsu, Y. H. (1994). “Use of capillary suction apparatus for estimating the averaged specific resistance of filtration cake.” J. Chem. Technol. Biotechnol., 59(1), 45–51.
Ma, W., Zhao, Y. Q., and Kearney, P. (2007). “A study of dual polymer conditioning of aluminum-based drinking water treatment residual.” J. Environ. Sci. Health, Part A: Toxic/Hazard. Subst. Environ. Eng., 42, 961–968.
Meeten, G. H., and Lebreton, C. (1992). “A filtration model of the capillary suction time method.” Pet. Sci. Technol., 9(2), 155–162.
Meeten, G. H., and Smeulders, J. B. A. F. (1995). “Interpretation of filterability measured by the capillary suction time method.” Chem. Eng. Sci., 50(8), 1273–1279.
Pan, J. R., Huang, C., Cherng, M., Li, K. -C., and Lin, C. -F. (2003). “Correlation between dewatering index and dewatering performance of three mechanical dewatering devices.” Adv. Environ. Res., 7(3), 599–602.
Sawalha, O., and Scholz, M. (2007). “Assessment of capillary suction time (CST) test methodologies.” Environ. Technol., 28(12), 1377–1386.
Sawalha, O., and Scholz, M. (2009). “Innovative enhancement of the design and precision of the capillary suction time testing device.” Water Environ. Res., 81(11), 2344–2352.
Scholz, M. (2005). “Review of recent trends in capillary suction time (CST) dewaterability testing research.” Ind. Eng. Chem. Res., 44(22), 8157–8163.
Scholz, M. (2006). “Revised capillary suction (CST) test to reduce consumable costs and improve dewaterability interpretation.” J. Chem. Technol. Biotechnol., 81(3), 336–344.
Tabachnick, B. G., and Fidell, L. S. (1996). Using multivariate statistics, 3rd Ed., HarperCollins, New York.
Teoh, S. -K., Tan, R. B. H., and Tien, C. (2006). “A new procedure for determining specific filter cake resistance from filtration data.” Chem. Eng. Sci., 61(15), 4957–4965.
Yukseler, H., Tosun, I., and Yetis, U. (2007). “A new approach in assessing slurry filterability.” J. Membr. Sci., 303(1–2), 72–79.
Information & Authors
Information
Published In
Copyright
© 2010 ASCE.
History
Received: May 21, 2009
Accepted: Jan 8, 2010
Published online: Jan 15, 2010
Published in print: Sep 2010
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.