Optimal Hydraulic Section of Ice-Covered Open Trapezoidal Channel
Publication: Journal of Cold Regions Engineering
Volume 31, Issue 3
Abstract
Previous studies have focused on the optimal hydraulic section for ice-free channels only. This paper presents the optimal trapezoidal section and its characteristics under ice-covered conditions. Using the Lagrange multiplier optimization method, formulas for the dimensions of the optimal hydraulic trapezoidal section are derived. The results show that the optimal hydraulic section under ice-covered conditions is different from that under ice-free conditions. The optimal width-to-depth ratio depends not only on the side slope, but also on the roughness coefficients of the ice cover and channel bed (bottom and sides). The ratio of bed roughness (or ice-cover roughness) to composite roughness is another key parameter in determining the shape of the optimal section. The comparison with the ice-free section shows that the optimal hydraulic section under ice-covered conditions is relatively narrow and deep, which helps reduce the heat loss at the water surface. Practical aspects of the optimal hydraulic section under ice-covered conditions are addressed.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research project is supported by the Key Research and Development Program of Shandong Province, China (2016GSF117038), National Science and Technology Support Program of China (2015BAB07B02), the Development of Science and Technology Plan of Jinan City, China (201302052), and the Teaching & Research Projects of the University of Jinan (J1641).
References
Chow, V. T. (1959). Open channel hydraulics, McGraw-Hill, New York.
Das, A. (2007). “Optimal design of channel having horizontal bottom and parabolic sides.” J. Irrig. Drain. Eng., 192–197.
Easa, S. M. (2009). “Improved channel cross section with two-segment parabolic sides and horizontal bottom.” J. Irrig. Drain. Eng., 357–365.
Ettema, R., Braileanu, F., and Muste, M. (2000). “Method for estimating sediment transport in ice-covered channels.” J. Cold Reg. Eng., 130–144.
Flynn, L. E., and Marino, M. A. (1987). “Canal design: Optimal cross sections.” J. Irrig. Drain. Eng., 335–355.
Han, Y-C. (2015). “Horizontal bottomed semi-cubic parabolic channel and best hydraulic section.” Flow. Meas. Instrum., 45(2015), 56–61.
Han, Y-C., and Easa, S. M. (2016). “Superior cubic channel section and analytical solution of best hydraulic properties.” Flow. Meas. Instrum., 50(2016), 169–177.
Jain, A., Bhattacharya, R. K., and Sanaga, S. (2004). “Optimal design of composite channels using genetic algorithm.” J. Irrig. Drain. Eng., 286–295.
Lyon, J. G., Williams, D. C., and Flannigan, K. G. (1994). “Effects of commercial vessel passage in narrow channels with and without ice cover.” J. Cold Reg. Eng., 47–64.
Ma, X., Bai, S., and Yuan, X. (2007). The ice conditions of rivers in China, Yellow River Publishing Company, ZhengZhou, China.
Nezhikhovskiy, R. A. (1964). “Coefficients of roughness of bottom surface of slush-ice cover.” Sov. Hydrol. Sel. Pap., 2, 127–150.
Pasquarell, G. C., and Shen, H. T. (1987). “Hydraulic analysis for ice-covered channel networks.” J. Cold Reg. Eng., 122–132.
Tan, C-A., Sinha, S. K., and Ettema, R. (1999). “Ice-cover influence on near-field mixing in dune-bed channel: Numerical simulation.” J. Cold Reg. Eng., 1–20.
Uzuner, M. S. (1975). “The composite roughness of ice covered streams.” J. Hydraul. Res., 13(1), 79–102.
Wei, L.-Y., and Huang, J.-Z. (2002). “Composite manning roughness coefficient of ice covered flow.” J. Wuhan Univ., 35(4), 1–8 (in Chinese).
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Nov 18, 2014
Accepted: Nov 22, 2016
Published ahead of print: Jan 30, 2017
Published online: Jan 31, 2017
Discussion open until: Jun 30, 2017
Published in print: Sep 1, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.