Below-Ground Performance of Rigid Polystyrene Foam Insulation: Review of Effective Thermal Resistivity Values Used in ASCE Standard 32-01—Design and Construction of Frost-Protected Shallow Foundations
Publication: Journal of Cold Regions Engineering
Volume 24, Issue 2
Abstract
Effective (design) thermal resistivity values for use of rigid, cellular polystyrene foam insulation in below-ground frost-protection applications play an important role in the success of the ASCE 32-01 standard. The ASCE 32-01 standard is currently recognized in U.S. model building codes as a cost-effective means of protecting building foundations against frost heave in regions with seasonal ground freezing and no permafrost. The long-term thermal performance of foundation insulation used for this purpose is, therefore, a critical building performance concern. This same concern also has relevance to sustained performance of below-ground insulation used for energy conservation purposes. This paper provides a critical review and analysis of data reported in the literature on below-ground thermal performance of rigid, cellular polystyrene foam insulations. These products can be molded expanded polystyrene or extruded polystyrene as defined by ASTM C578 in ASTM 2008 Standard. The findings serve to document and confirm effective thermal resistivity values originally incorporated into the ASCE 32-01 standard for frost protection of building foundations.
Get full access to this article
View all available purchase options and get full access to this article.
References
AFM Corporation. (1996). Thermal transmission and moisture content analyses conducted on buried EPS perform guard insulation, Maxim Technologies/Twin City Testing, Excelsior, Minn.
ASCE. (2001). “Design and construction of frost-protected shallow foundations.” SEI/ASCE 32-01, Reston, Va.
ASTM. (1994). “Moisture control in buildings.” Manual 18, ASTM, Philadelphia, Pa.
ASTM. (2007). “Standard test method for characterizing the effect of exposure to environmental cycling on thermal performance of insulation products.” C1512-07, West Conshohocken, Pa.
ASTM. (2008). “Standard specification for rigid, cellular polystyrene thermal insulation.” C578-08, West Conshohocken, Pa.
Clark, E. S., Krzewinski, T. G., and Metz, M. C. (1981). “The trans-Alaska pipeline system synthetically insulated workpad—An evaluation of present conditions.” Proc., ASME Energy—Sources Technology Conf. and Exhibition, ASME, New York.
Crandell, J. H. (2004). “Frost-protected shallow foundations.” Structure Magazine, December 2003/January 2004.
DOE/Oakridge National Laboratory (ORNL). (1988). Building foundation design handbook, Underground Space Center, University of Minnesota for Oakridge National Laboratory (ORNL), and DOE, Washington, D.C.
Eiesland, G. (1974). Cold Regions Research and Engineering Laboratory (CRREL) (1977): Draft translation 648 of slab on ground, U.S. Army Corps of Engineers, Hanover, N.H.
EPS Molders Association (EPSMA). (2009). “15-year in-situ research shows EPS outperforms XPS in r-value retention.” Technical Bulletin No. 103, Crofton, MD, ⟨www.epsmolders.org⟩ (Feb. 2, 2009).
Esch, D. C. (1986). “Insulation performance beneath roads and airfields in Alaska.” Proc., 4th Int. Cold Regions Specialty Conf., ASCE, Reston, Va.
Esch, D. C. (1990). “20 year performance history of first insulated roadway on permafrost in Alaska.” Proc., 5th Canadian Permafrost Conf., Secretariat NRC, Canada.
Farouki, O. (1992). “European foundation designs for seasonally frozen ground.” Monograph 92-1, U.S. Army Corps of Engineers, Cold Regions Research and Engineering Laboratory, Hanover, N.H.
Greeley, T. R. (1997). “A review of expanded polystyrene (EPS) properties, performance, and new applications, insulation materials: Testing and applications.” ASTM STP 1320, Vol. 3, West Conshohocken, Pa.
Jones, C. W., Miedema, D. G., and Watkins, J. S. (1982). Frost action in soil foundations and control of surface structure heaving, U.S. Department of the Interior, Bureau of Reclamation, Engineering Research Center, Denver.
Linell, K. A., and Lobacz, F. E. (1980). “Design and construction of foundations in areas of deep seasonal frost and permafrost.” Special Rep. No. 80-34, U.S. Army Corp of Engineers, Cold Regions Research and Engineering Laboratory, Hanover, N.H.
McFadden, T. T., and Bennett, F. L. (1991). Construction in cold regions: A guide for planners, engineers, contractors, and managers, Wiley, New York.
National Research Council (NRC). (1999). “Performance of thermal insulation on the exterior of basement walls.” Construction technology update no. 36, National Research Council (NRC), Institute for Research in Construction, Canada.
Ojanen, T., and Kokko, E. (1997). “Moisture performance analysis of EPS frost insulation, insulation materials: Testing and applications.” ASTM STP 1320, Vol. 3, West Conshohocken, Pa.
Ovstaas, G., Smith, S., Strzepek, W., and Titley, G. (1983). “Thermal performance of various insulations in below-earth-grade perimeter application.” ASTM STP 789: Thermal insulation, materials and systems for energy conservation in the ‘80s, F. A. Govan, D. M. Greason, and J. D. McAllister, eds., ASTM, West Conshohocken, Pa., 435–454.
Sandberg, P. I. (1986). “Moisture content and thermal conductivity in soil insulation.” J. Thermal Insulation, 10.
Society of the Plastics Industry (SPI). (1994). Expanded polystyrene thermal insulation performance in a below-grade application, Twin City Testing Corporation, Washington, D.C.
Sterling, R. L. (1986). Moisture absorption and its effect on the thermal properties of EPS insulation for foundation applications: A review and analysis of published laboratory and field tests, Underground Space Center, University of Minnesota for Society of Plastics Industry, Inc. (SPI), Expanded Polystyrene Division, Washington, D.C.
Steurer, P. M. (1989). Methods used to create an estimate of he 100-year return period of the air-freezing index, U.S. Department of Commerce, National Oceanic and Atmospheric Administration, National Climatic Data Center, Asheville, N.C.
Information & Authors
Information
Published In
Copyright
© 2010 ASCE.
History
Received: Mar 5, 2009
Accepted: Sep 24, 2009
Published online: Sep 29, 2009
Published in print: Jun 2010
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.