Data-Driven Simulation-Based Analytics for Heavy Equipment Life-Cycle Cost
Publication: Journal of Construction Engineering and Management
Volume 146, Issue 5
Abstract
Heavy civil and mining construction industries rely greatly on the usage of heavy equipment. Managing a heavy-equipment fleet in a cost-efficient manner is key for long-term profitability. To ensure the cost-efficiency of equipment management, practitioners are required to accurately quantify the equipment life-cycle cost, instead of merely depending on the empirical method. This study proposes a data-driven, simulation-based analytics to quantify the life-cycle cost of heavy equipment, incorporating both maintenance and ownership costs. In the proposed methodology, the -means clustering and expectation-maximization (EM) algorithms are applied for input modeling to distinguish the maintenance stages, and to further generate corresponding distributions of these points. These distributions then are used to quantify the uncertainties embedded in the equipment costs through simulations. A historical data set of ownership and maintenance costs for a mining truck model was used to demonstrate the feasibility and validity of the proposed approach. This approach was proven to be effective in predicting the cumulative total cost of equipment, which provides analytical decision support for equipment-management practitioners.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code used during the study were provided by a third party (i.e., in the case study). Direct requests for these materials may be made to the provider as indicated in the Acknowledgements.
Acknowledgments
This work was generously supported by Graham Industrial Services and was funded by a Collaborative Research and Development Grant (CRDPJ 492657) sponsored by the Natural Science and Engineering Research Council of Canada (NSERC).
References
AbouRizk, S. 2010. “Role of simulation in construction engineering and management.” J. Constr. Eng. Manage. 136 (10): 1140–1153. https://doi.org/10.1061/(ASCE)CO.1943-7862.0000220.
Amini, A. A., M. Mashayekhi, H. Ziari, and S. Nobakht. 2012. “Life cycle cost comparison of highways with perpetual and conventional pavements.” Int. J. Pavement Eng. 13 (6): 553–568. https://doi.org/10.1080/10298436.2011.628020.
Bayzid, S. M. 2014. “Modeling maintenance cost for road construction equipment.” M.Sc. thesis, Dept. of Civil and Environmental Engineering, Univ. of Alberta.
Bayzid, S. M., Y. Mohamed, and M. Al-Hussein. 2016. “Prediction of maintenance cost for road construction equipment: A case study.” Can. J. Civ. Eng. 43 (5): 480–492. https://doi.org/10.1139/cjce-2014-0500.
Biller, B., and C. Gunes. 2010. “Introduction to simulation input modeling.” In Proc., 2010 Winter Simulation Conf. Piscataway, NJ: IEEE.
Chan, A., G. Keoleian, and E. Gabler. 2008. “Evaluation of life-cycle cost analysis practices used by the Michigan Department of Transportation.” J. Transp. Eng. 134 (6): 236–245. https://doi.org/10.1061/(ASCE)0733-947X(2008)134:6(236).
Dempster, A. P., N. M. Laird, and D. B. Rubin. 1977. “Maximum likelihood from incomplete data via the EM algorithm.” J. R. Stat. Soc.: Ser. B (Methodol.) 39 (1): 1–22.
Drinkwater, R. W., and N. A. Hastings. 1967. “An economic replacement model.” J. Oper. Res. Soc. 18 (2): 121–138. https://doi.org/10.1057/jors.1967.24.
Er, K. C., S. Fernando, S. AbouRizk, and J. Ruwanpura. 2000. “Selecting the best tunnel construction for the 1st stage of the SESS tunnel using simulation.” In Proc., 7th Annual Construction Research Forum. Edmonton, Canada: Hole School of Construction, Univ. of Alberta.
Fan, H., S. AbouRizk, H. Kim, and O. Zaïane. 2008. “Assessing residual value of heavy construction equipment using predictive data mining model.” J. Comput. Civ. Eng. 22 (3): 181–191. https://doi.org/10.1061/(ASCE)0887-3801(2008)22:3(181).
Forgy, E. W. 1965. “Cluster analysis of multivariate data: Efficiency versus interpretability of classifications” Biometrics 21 (1): 768–769.
Ghadam, P., M. Ravanshadnia, and S. Ramezani. 2012. “Determining economic life of earth moving equipment by using life cycle cost analysis: Case study.” In Proc., Int. Conf. on Construction and Real Estate Management, 1–6. Beijing: China Architecture and Building Press.
Gransberg, D. D., and E. P. O’Connor. 2015. Major equipment life-cycle cost analysis. St. Paul, MN: Minnesota Dept. of Transportation.
Hajjar, D., and S. AbouRizk. 1997. “AP2-Earth: A simulation based system for the estimating and planning of earth moving operations.” In Proc., 1997 Winter Simulation Conf. Piscataway, NJ: IEEE.
Halpin, D. W. 2010. Construction management. Hoboken, NJ: Wiley.
Han, J., J. Pei, and M. Kamber. 2011. Data mining: Concepts and techniques. Waltham, MA: Elsevier.
Hastings, W. K. 1970. “Monte Carlo sampling methods using Markov chains and their applications.” Biometrika 57 (1): 97–109. https://doi.org/10.1093/biomet/57.1.97.
Ji, W., S. M. AbouRizk, O. R. Zaïane, and Y. Li. 2018. “Complexity analysis approach for prefabricated construction products using uncertain data clustering.” J. Constr. Eng. Manage. 144 (8): 04018063. https://doi.org/10.1061/(ASCE)CO.1943-7862.0001520.
Kuhl, M. E., N. M. Steiger, E. K. Lada, M. A. Wagner, and J. R. Wilson. 2009. “Introduction to modeling and generating probabilistic input processes for simulation.” In Proc., 2009 Winter Simulation Conf. Piscataway, NJ: IEEE.
Law, A. M. 2007. Simulation modeling and analysis. New York: McGraw-Hill Education.
Leemis, L. M. 2004. “Building credible input models.” In Proc., 2004 Winter Simulation Conf. Piscataway, NJ: IEEE.
Lucko, G. 2003. “A statistical analysis and model of the residual value of different types of heavy construction equipment.” Ph.D. dissertation, Charles E. Via, Jr. Dept. of Civil and Environmental Engineering, Virginia Tech.
Lucko, G. 2011. “Modeling the residual market value of construction equipment under changed economic conditions.” J. Constr. Eng. Manage. 137 (10): 806–816. https://doi.org/10.1061/(ASCE)CO.1943-7862.0000279.
Lucko, G., C. M. Anderson-Cook, and M. C. Vorster. 2006. “Statistical considerations for predicting residual value of heavy equipment.” J. Constr. Eng. Manage. 132 (7): 723–732. https://doi.org/10.1061/(ASCE)0733-9364(2006)132:7(723).
Mandapaka, V., I. Basheer, K. Sahasi, P. Ullidtz, J. T. Harvey, and N. Sivaneswaran. 2012. “Mechanistic-empirical and life-cycle cost analysis for optimizing flexible pavement maintenance and rehabilitation.” J. Transp. Eng. 138 (5): 625–633. https://doi.org/10.1061/(ASCE)TE.1943-5436.0000367.
Mitchell, Z., J. Hildreth, and M. Vorster. 2011. “Using the cumulative cost model to forecast equipment repair costs: Two different methodologies.” J. Constr. Eng. Manage. 137 (10): 817–822. https://doi.org/10.1061/(ASCE)CO.1943-7862.0000302.
Mitchell, Z. W., Jr. 1998. “A statistical analysis of construction equipment repair costs using field data & the cumulative cost model.” Ph.D. dissertation, Charles E. Via, Jr. Dept. of Civil and Environmental Engineering, Virginia Tech.
Mithraratne, N., and B. Vale. 2004. “Life cycle analysis model for New Zealand houses.” Build. Environ. 39 (4): 483–492. https://doi.org/10.1016/j.buildenv.2003.09.008.
Peña-Mora, F., S. Han, S. Lee, and M. Park. 2008. “Strategic-operational construction management: Hybrid system dynamics and discrete event approach.” J. Constr. Eng. Manage. 134 (9): 701–710. https://doi.org/10.1061/(ASCE)0733-9364(2008)134:9(701).
Peurifoy, R., W. Ledbetter, and C. J. Schexnayder. 2002. Construction, planning, equipment, and methods. New York: McGraw-Hill Education.
Puri, V., and J. C. Martinez. 2013. “Modeling of simultaneously continuous and stochastic construction activities for simulation.” J. Constr. Eng. Manage. 139 (8): 1037–1045. https://doi.org/10.1061/(ASCE)CO.1943-7862.0000661.
Santos, J., and A. Ferreira. 2013. “Life-cycle cost analysis system for pavement management at project level.” Int. J. Pavement Eng. 14 (1): 71–84. https://doi.org/10.1080/10298436.2011.618535.
Vorster, M. C. 1980. “A systems approach to the management of civil engineering construction equipment.” Ph.D. dissertation, Dept. of Civil Engineering, Stellenbosch Univ.
Vorster, M. C. 2009. Construction equipment economics. Christiansburg, VA: Pen.
Zong, Y. 2017. “Maintenance cost and residual value prediction of heavy construction equipment.” M.Sc. thesis, Dept. of Civil and Environmental Engineering, Univ. of Alberta.
Information & Authors
Information
Published In
Journal of Construction Engineering and Management
Volume 146 • Issue 5 • May 2020
Copyright
©2020 American Society of Civil Engineers.
History
Received: Jun 17, 2019
Accepted: Oct 16, 2019
Published online: Feb 29, 2020
Published in print: May 1, 2020
Discussion open until: Jul 29, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.