Development of Data-Driven Influence Model to Relate the Workplace Environment to Human Error
Publication: Journal of Construction Engineering and Management
Volume 144, Issue 3
Abstract
Because human error plays a direct role in accidents, studying the causal relationship between the environment and human error is essential to prevent mishaps. However, these relationships have been explored solely using bivariate statistical analysis and thus require more intermediate factors to emphasize the need for monitoring and controlling human error by improving the workplace environment. Moreover, prevalent studies rely heavily on expert experience, which is subjective and creates potential estimation noise. In this study, the mechanism whereby environmental factors influence behavior and its associate factors is learned with an algorithm using a Bayesian network structure. Rather than being simply data-driven, the algorithm initiates learning from prior knowledge, the theoretical causal chain in the cognitive reliability and error analysis method (CREAM), and revises the learning approach against safety inspection data if necessary. The learned Bayesian network shows that human error and incorrect sequencing result from a combination of limited cognitive functions and improper spatial/workmanship arrangements caused by equipment defects, improper design, and management problems. Bridging the gaps in previous studies, the action interface revealed by this study is useful for on-site quality control.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Data analyzed during the study were provided by a third party. Requests for data should be directed to the provider indicated in the acknowledgements. Information about the Journal’s data sharing policy can be found here: http://ascelibrary.org/doi/10.1061/%28ASCE%29CO.1943-7862.0001263.
Acknowledgments
The authors thank the Natural Science Foundation of China (No. 51578317) and the United Technologies Corporation (No. 20153000259) for their support of this study. The authors specially thank United Technologies Corporation for providing the data used in this study. The authors are also grateful for input from industry professionals who participated in this research.
References
Cao, Y. (2009). “Engineering project construction safety incident and safe design, working environment research.” Chongqing Jiao Tong Univ., Nanan Qu, China.
Carvalho, A. M. (2009). “Scoring functions for learning Bayesian networks.”, Instituto superior Téchnico, Technical Univ. of Lisboa, Lisboan, Portugal.
Cheng, J., Bell, D. A., and Liu, W. (1997). “Learning belief networks from data: An information theory based approach.” Proc., 6th Int. Conf. on Information and Knowledge Management, ACM, New York, 325–331.
Chi-Square Distribution Table. (2017). ⟨http://fac.ksu.edu.sa/sites/default/files/chi-square-table_2.pdf⟩ (Dec. 15, 2017).
Cho, Y. K., Haas, C. T., Liapi, K., and Sreenivasan, S. V. (2002). “A framework for rapid local area modeling for construction automation.” Autom. Constr., 11(6), 629–641.
Chua, D. K. H., and Yang, M. G. (2004). “Incident causation model for improving feedback of safety knowledge.” J. Constr. Eng. Manage., 542–551.
CII (Construction Industry Institute). (2005). “AR-2004—CII 2004 annual report.” Austin, TX.
Cormen, T. H., et al. (2001). “Section 22.4: Topological sort.” Introduction to algorithms, 2nd Ed., MIT Press, Cambridge, MA.
Dawson, I. G. J., Johnson, J. E. V., and Luke, M. A. (2014). “Using risk model judgments to better understand perceptions of synergistic risks.” Br. J. Psychol., 105(4), 581–603.
Eclipse version Luna 4.4.2 [Computer software]. Eclipse Foundation, Ottawa.
Fang, D., Zhao, C., and Zhang, M. (2016). “A cognitive model of construction workers’ unsafe behaviors.” J. Constr. Eng. Manage., 04016039.
Friedman, N. (1997). “Learning belief networks in the presence of missing values and hidden variables.” Proc., 14th Int. Conf. on Machine Learning, Vol. 97, Morgan Kaufmann, San Francisco, 125–133.
Gao, W., and Zhang, L. (2002). “Human reliability analysis method: CREAM and its application.” Chin. J. Ergon., 8(4), 8–12.
Golparvar-Fard, M., Peña-Mora, F., and Savarese, S. (2009). “Monitoring of construction performance using daily progress photograph logs and 4D as-planned models.” J. Comput. Civil Eng., 2009(115), 53–63.
Groth, K. M., and Swiler, L. P. (2013). “Bridging the gap between HRA research and HRA practice: A Bayesian network version of SPAR-H.” Reliab. Eng. Syst. Saf., 115, 33–42.
He, X., Wang, Y., Shen, Z., and Huang, X. (2008). “A simplified CREAM prospective quantification process and its application.” Reliab. Eng. Syst. Saf., 93(2), 298–306.
Hollnagel, E. (1990). “The design of integrated man-machine systems and the amplification of intelligence.” Int. Conf. on Supercomputing in Nuclear Applications, Mito City, Japan.
Hollnagel, E. (1998). Cognitive reliability and error analysis method (CREAM), Elsevier, New York.
Hu, C. (2006). “The research on algorithms for learning Bayesian network structures.” Ph.D. dissertation, Hefei Univ. of Technology, Anhui Sheng, China.
Jiang, Z. (2014). “Construction safety related behaviors simulation based on system dynamics modeling and agent-based modeling.” Ph.D. dissertation, Tsinghua Univ., Beijing.
Larsson, S., Pousette, A., and Törner, M. (2008). “Psychological climate and safety in the construction industry-mediated influence on safety behavior.” Saf. Sci., 46(3), 405–412.
Lawrence, A. C. (1974). “Human error as a cause of accidents in gold mining.” J. Saf. Res., 6(2), 78–88.
Leu, S. S., and Chang, C. M. (2013). “Bayesian-network-based safety risk assessment for steel construction projects.” Accid. Anal. Prev., 54, 122–133.
Li, P. C., Chen, G. H., Zhang, L., and Dai, L. C. (2011). “Research review and development trends of human reliability analysis techniques.” At. Energy Sci. Technol., 45(3), 329–340.
Li, P.-C., Chen, G.-H., Dai, L.-C., and Zhang, L. (2012). “A fuzzy Bayesian network approach to improve the quantification of organizational influences in HRA frameworks.” Saf. Sci., 50(7), 1569–1583.
Liang, K. (2014). “Analysis on human factors in maritime traffic accident based on CREAM.” Dalian Maritime Univ., Liaoning Sheng, China.
Lipscomb, H. J., Schoenfisch, A. L., Cameron, W., Kucera, K. L., Adams, D., and Silverstein, B. A. (2014). “How well are we controlling falls from height in construction? Experiences of union carpenters in Washington State, 1989–2008.” Am. J. Ind. Med., 57(1), 69–77.
Liu, B., Shen, Y., Chen, X., Sun, H., and Chen, Y. (2014). “A complex multi-attribute large-group PLS decision-making method in the interval-valued intuitionistic fuzzy environment.” Appl. Math. Modell., 38(17–18), 4512–4527.
Marseguerra, M., Zio, E., and Librizzi, M. (2006). “Quantitative developments in the cognitive reliability and error analysis method (CREAM) for the assessment of human performance.” Ann. Nucl. Energy, 33(10), 894–910.
Neapolitan, R. E. (2004). Learning Bayesian networks, Vol. 38, Pearson Prentice Hall, Upper Saddle River, NJ.
Nowakowski, T., and Werbińska-Wojciechowska, S. (2014). “Expert system for means of transport maintenance processes performance: A comparative analysis for various types of rail vehicles.” Proc., European Safety and Reliability Conf. on Safety and Reliability: Methodology and Applications, Taylor & Francis Group, London, 1217–1225.
Python version 2.7 [Computer software]. Python Software Foundation, Wilmington, DE.
Rasmussen, J., Pejtersen, A. M., and Schmidt, K. (1990). Taxonomy for cognitive work analysis, Risø National Laboratory, Roskilde, Denmark.
Ravi Sankar, N., and Prabhu, B. S. (2001). “Modified approach for prioritization of failures in a system failure mode and effects analysis.” Int. J. Q. Reliab. Manage., 18(3), 324–336.
Reason, J. (1990). Human error, Cambridge University Press, Cambridge, U.K.
Rodrigues, F., Coutinho, A., and Cardoso, C. (2015). “Correlation of causal factors that influence construction safety performance: A model.” Work, 51(4), 721–730.
Sachs, K., Perez, O., Pe’er, D., Lauffenburger, D. A., and Nolan, G. P. (2005). “Causal protein-signaling networks derived from multiparameter single-cell data.” Science, 308(5721), 523–529.
Sato, Y., and Inoue, K. (1986). “The safety assessment of human-robot systems (hazard identification based on the action-change and action-chain model).” Jpn. Soc. Mech. Eng., 29(250), 1356–1361.
Senders, J. W., and Moray, N. P. (1991). Human error: Cause, prediction, and reduction, L. Erlbaum Associates, Hillsdale, NJ.
Spirtes, P., Glymour, C., and Scheines, R. (1990). “Causality from probability.” Proc., Advanced Computing for the Social Sciences, Williamsburgh, VA.
Srinivas, S., Russell, S., and Agogino, A. (1990). “Automated construction of sparse Bayesian networks from unstructured probabilistic models and domain information.” Uncertainty in artificial intelligence, M. Henrion, R. D. Shachter, L. N. Kanal, and J. F. Lemmer, eds., Vol. 5, North-Holland, Amsterdam, Netherlands.
Stewart, M. G. (1992). “Modeling human error rates for human reliability analysis of a structural design task.” Reliab. Eng. Syst. Saf., 36(2), 171–180.
Sui, P. (1988). Safety principles and accident prevention, Metallurgical Industry, Beijing.
Suraji, A., Duff, A. R., and Peckitt, S. J. (2001). “Development of causal model of construction accident causation.” J. Constr. Eng. Manage., 337–344.
Surry, J. (1971). Industrial accident research: A human engineering appraisal, Univ. of Toronto, Toronto.
Tantisevi, K., and Akinci, B. (2007). “Automated generation of workspace requirements of mobile crane operations to support conflict detection.” Autom. Constr., 16(3), 262–276.
Uschold, M., and Gruninger, M. (1996). “Ontologies: Principles, methods and applications.” Knowl. Eng. Rev., 11(2), 93–136.
Wang, J., Ruxton, T., and Labrie, C. R. (1995). “Design for safety of engineering systems with multiple failure state variables.” Reliab. Eng. Syst. Saf., 50(3), 271–284.
Wickens, C. D., Hollands, J. G., Banbury, S., and Parasuraman, R. (2015). Engineering psychology & human performance, Psychology Press, East Sussex, U.K.
Wigglesworth, V. B. (1972). Digestion and nutrition, Springer, Dordrecht, Netherlands, 476–552.
Yaramakala, S., and Margaritis, D. (2005). “Speculative Markov blanket discovery for optimal feature selection.” Proc., 5th IEEE Int. Conf. on Data Mining, IEEE, Houston.
Zhang, L., Wu, X., Skibniewski, M. J., Zhong, J., and Lu, Y. (2014). “Bayesian-network-based safety risk analysis in construction projects.” Reliab. Eng. Syst Saf., 131(55), 29–39.
Zhang, M., and Fang, D. (2012). “Cognitive causes of construction worker’s unsafe behaviors and management measures.” China Civ. Eng. J., 45(2), 297–305.
Zhang, S. (2004). “The study on country’s coalmine accident-causing theory and prevention countermeasures.” Zhejiang Univ., Hangzhou, China.
Zhou, Y., Fenton, N., and Neil, M. (2014). “Bayesian network approach to multinomial parameter learning using data and expert judgments.” Int. J. Approximate Reasoning, 55(5), 1252–1268.
Zou, M., and Conzen, S. D. (2005). “A new dynamic Bayesian network (DBN) approach for identifying gene regulatory networks from time course microarray data.” Bioinformatics, 21(1), 71–79.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: Apr 11, 2017
Accepted: Sep 12, 2017
Published online: Jan 6, 2018
Published in print: Mar 1, 2018
Discussion open until: Jun 6, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.